Results 3,211 to 3,220 of 14580
-
February 3rd, 2008 06:19 AM #3211
What a flop, sir louchua, bad trip nga yang nangyari sa yo. We’ll be interested in what your dealer’s response to your complaint. This early, basing on the account that you have relayed and images that you posted, I can surmise that this most probably is a case of a lapse in quality control, trivial it may seem.
Please keep us posted.
-
February 3rd, 2008 06:21 AM #3212
Mga BOSB, question lang regarding mga strada na may pre-installed fender flares, nakakabit na ba ito from Thailand when it was imported or was it installed dito sa factory warehouse ng Mitsubishi prior to its release?
The reason why I’m asking is to give us an idea where the quality control lapse occurred and remedial measures can probably be recommended to Mitsubishi Philippines to adopt.Last edited by ooba99; February 3rd, 2008 at 07:05 AM.
-
February 3rd, 2008 06:59 AM #3213
-
February 3rd, 2008 07:23 AM #3214
Good morning sir Boz. I already have raised the concern to sir av8or5, please check the strada club thread. I think he already has previous communications with MMPC for some other concerns. I suggest that we let the officers of the club handle this at the appropriate time. Let's give the dealer an opportunity to respond to sir louchua's letter complaint.
Sir louchua, please provide a copy of your letter complaint to MMPC and the officers of the Strada Club, so they will be kept informed first hand.Last edited by ooba99; February 3rd, 2008 at 07:27 AM.
-
February 3rd, 2008 10:26 AM #3215
BOSB, i saw the pics louchua posted regarding his torn fender flare, mas madami pa screws yung factory installed versus those installed by miggyboy sa glx ko. dun sa mga aftermarket fender flares, wala drilling sa body, they just intall it with the existing screws underneath sa wheel well with 2-3 clips lang to support. ok naman yung sa akin, i drove my ride sa nlex 160 kph, wala naman nangyari... i could only surmise na baka di nailagay yung complete screws ng fender flare ni sir louchua or di na-tighten ng maayos when it was given to him sa casa. anyway, the insurance company will surely shoulder the replacement of sir louchua's torn fender flare, with the agreed participation fee, but mitsubishi phils should be informed and take the neccessary action to prevent the same freak incident in the future. kakatakot din yun.
sir louchua, update mo kami sa development ng complaint mo, buti na lang wala damage sa body ng ride mo and wala ka katabi... lets just pray na wala din tinamaan pagbagsak nung fender flare mo sa baba ng skyway
-
February 3rd, 2008 10:37 AM #3216
Sir louchua, I can only think of one reason why your fender flare got ripped off at high speed: Majority of the clips used were either loose, weak/defective.
My right fender flare figured in an accident sometime last november. It obtained very slight damages like scratches and minor disalignment to the bumper, hence, the lower front portion of the fender flare is no longer clipped perfectly to the side of the bumper. Usually I would see a big gap between the right fender flare and the bumper. Those who have been to the 2nd eb (pauland) saw that huge gap between my right fender flare and the bumper. I also go to Batangas weekly and hit around 120kph sa skyway and 140-160kph sa star tollway. Inspite of the said existing gap and the speed that i usually take, my fender flare is still intact.
So my guess, sir louchua, is that the clips of your fender flare were defective ever since you bought your unit. It should be covered by the warranty.
Sir louchua, go directly to your SA/dealer and inform them about what happened and insist that they replace the fender flare free of charge. If that doesn't work, write a fomal letter/complaint addressed to them and furnish MMPC with a copy of that letter. If all else fails and if you plan to pusue a legal action against them, do let us know. We are here to help you.
Do keep us posted for any developments.
Thanks.
-
Verified Tsikot Member
- Join Date
- Sep 2007
- Posts
- 612
February 3rd, 2008 01:01 PM #3217
-
Verified Tsikot Member
- Join Date
- Sep 2007
- Posts
- 612
February 3rd, 2008 01:11 PM #3218i have installed the fender flare personaly. its 2 metal screw and sevel clips.
its should go off otherwise the fender flare will rip. i think what happen to sir louchua is that the clip is not properly fit., i hve this problem when i'm installing it. its hard to lock the clip to the body properly. I already drove my car to 160kph but nothin happen. it still as stiff as before.
-
Verified Tsikot Member
- Join Date
- Sep 2007
- Posts
- 612
February 3rd, 2008 01:24 PM #3219sometimes it might happen this way. It was wayback 10 years ago, me and my friend have his strada serviced, but when its done the stereo sub hve been damaged and we let them pay the damages. while we where walking inside the casa my other friend complained about his lancer regarding the repainting job of his side mirror. cause he caught the service personnel repairing his side mirror due to scratches. May be this might happen to you, they have scratch it and repair it. but during the installation they hve not fit it well. Hope this are not the case but it can happen
-
February 3rd, 2008 01:47 PM #3220
*louchua- we are behind you!
i am quite surprised myself that something as INTACTas fender flares would suddenly declare freedom! pati yung extension nya mounted at the bumper flew! Question po: based on your picture, i do see the mountings for the screw- is the bracket holding the flare still there or is it just the hole nalang? if you see the hole nalang, try to see if the screw might still be inside the fender. also, since the fender flare area shows dried up murky water and other possible external elements- proves that not only water passes through, but also air produced by speed pulling the moulding away from the body. was there any small opening or a crack on the sealants? you can check on that with the other remaining flares
i agree with av8or5- write a letter of complaint to MMPC and the Dealer (c/o the service manager)- as for MMPC- the service department should be it. the email address is found on the service manual- please PM me if that didn't work and i'll think of something brilliant, i have someone in mind. ok bro!
to follow up on what DonT asked you- about certain vibrations or strange noises, did you notice anything or was your stereo on? or perhaps the vibration may not be too strong for you as the new strada has good sound insulation.
as asked by ooba99- the fender flares are also installed at the thailand factory. built up before it goes inside the ship. when i visited the MMPC plant a few years ago, the assembly of a High-Grade Adventure Super Sport calls for hole-boring for the flares before the CEDP paint process starts. I presume that this principle applies to the Strada.
this must be replaced by the plant within warranty as this shows questionable workmanship. but i will try to go to motorplaza to read over the warranty booklet- again.
be cool bro... thanks for your time.drive inspired, always!
Lots of shops offering PPF now but with different brands. May XPTT, Tokyo Film, Profilm, etc ... ...
Paint Protection Film (PPF)