Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]

[Ry_Tower]

question lang po sirs.

budget (not so much on budget wise), comfort ride (di matigas and absorbing sa humps and lubak na hindi tumutukod) on road and tibay.

Sino po sa mga brand na ito?

Rancho rs5000

OME kit (non sport)

Ironman suspension kit (gas)

KYB just-a-gas / monomax

thanks!

IMO OEM with adjustable sensors and Rancho and last yung KYB. Di ko pa nasubukan or na-experience yung Ironman suspension kit eh.

[blue_gambit]

I'd go with adjustabe OEM shocks, they're really worth it. Especially when playing at the bends... hehehe

[dominee_09]

Anybody know how to replace the headlight assembly of our Rig? I'll be replacing mine with clear ones tommorow, sorf of a D.I.Y. project

already removed the grill and the 2 nuts on the inside part of the assembly, kaso ayaw pa rin matanggal? baka me na miss lang ako... Thanks

na try mo na ba tangalin yung corner lights? meron kasi doon 2 pa screw. pag tangal mo ng corner light makikita mo na un... hth

[blue_gambit]

na try mo na ba tangalin yung corner lights? meron kasi doon 2 pa screw. pag tangal mo ng corner light makikita mo na un... hth

di ko matangal yung corner lamps, kahit natanggal ko na yung 2 screw na nag hold dun.. me kulang pa ba?

[dominee_09]

di ko matangal yung corner lamps, kahit natanggal ko na yung 2 screw na nag hold dun.. me kulang pa ba?

isa lang naman ang screw ng corner lamp (1 "+" type screw) na nasa loob makikita. after that, try to force the corner lamp papunta sa harap.

after that makikita mo may 2 pa screw (same as the 2 screw that can be seen after removing the grill) nakakabit sa chassis and headlight.

[blue_gambit]

isa lang naman ang screw ng corner lamp (1 "+" type screw) na nasa loob makikita. after that, try to force the corner lamp papunta sa harap.

after that makikita mo may 2 pa screw (same as the 2 screw that can be seen after removing the grill) nakakabit sa chassis and headlight.

Actually na remove ko na yung grill tsaka 2 nuts sa body housing. Ayaw talaga gumalaw nung housing, pati yung yung screw sa signal light. I'll try another technique tommorow...

[dominee_09]

Actually na remove ko na yung grill tsaka 2 nuts sa body housing. Ayaw talaga gumalaw nung housing, pati yung yung screw sa signal light. I'll try another technique tommorow...

basta sir, in order to remove the housing (headlight) you need to remove four (4) nuts. two (2) sa grill side and another two (2) sa signal light(corner lamp) side.

[Renault Manto]

To my fellow Pajero owners (Most specially those from the south side);

Pajero Pilipinas Auto Club will be at:





Pajero owners from the Calabarzon area and Pajero enthusiasts in Metro Manila are all welcome to join us in the event.

We will have a convoy from points in East/North; Magallanes & Mamplasan for those coming from Greater Manila Manila

For more information please check our website www.pajeropilipinasautoclub.com (The Real Pajero Pilipinas)

See you there

[Ry_Tower]

I'd go with adjustabe OEM shocks, they're really worth it. Especially when playing at the bends... hehehe

Yes, very handy when travelling in twisty roads. Yung Innova at Nissan Urvan na nakasabay ko during the holidays, iwan talaga sa corners since 4 kami sa sasakyan at hard setting ginamit ko. Swabe sa corners and tight bends coupled with wide tires pa (265x70). Concrete naman kaya no problem sa ride comfort. Iba talaga if gumagana pa SMH settings.

Next plan ko ay yung "o-sulee" (tama ba spelling hehe) coil spring cushion system. Ok kaya ito?

[junerski]

isa lang naman ang screw ng corner lamp (1 "+" type screw) na nasa loob makikita. after that, try to force the corner lamp papunta sa harap.

after that makikita mo may 2 pa screw (same as the 2 screw that can be seen after removing the grill) nakakabit sa chassis and headlight.

yung clearance/corner lamp may screw and parang spring lock/mechanism... baka nakaclip pa kaya hindi matangal... pagtangal na yun, use a flatscrewdriver, then ipasok nyo sir sa singit nung clearance lamp (maganda dun sa baba) in a diagonal position, para bang sisikwatin nyo yung lamp para magprotrude siya. hehe sorry hirap explain