2014 Mazda 3

[mnm88]

Thanks for the warm welcome Sir Travajante! Ive been mulling over what upgrades to get and here's what i have planned so far:
1. Of course, your infamous plate relocator
2. Seatmate's seat covers (any feedbacks?)
3. OEM 18's

Thats about it! Will keep it as simple as possible


Sent from my iPhone using Tapatalk

[travajante]

Thanks for the warm welcome Sir Travajante! Ive been mulling over what upgrades to get and here's what i have planned so far:
1. Of course, your infamous plate relocator
2. Seatmate's seat covers (any feedbacks?)
3. OEM 18's

Thats about it! Will keep it as simple as possible


Sent from my iPhone using Tapatalk

Simple is great! I don't have 1st hand feedback on Seatmate, but many on here have been happy with them.

Sent from my ASUS_Z00AD using Tsikot Forums mobile app

[xsist]

Boss question po. While cruising on subic expressway, my 2.0 m3 wont let me rev past 4k rpm and i was stuck at 165kph. But in the same journey, i was able to reach 185kph before that. Any advice? Thanks.

Sent from my SM-N910C using Tsikot Forums mobile app

[travajante]

Boss question po. While cruising on subic expressway, my 2.0 m3 wont let me rev past 4k rpm and i was stuck at 165kph. But in the same journey, i was able to reach 185kph before that. Any advice? Thanks.

Sent from my SM-N910C using Tsikot Forums mobile app

No Check Engine Light?

Sent from my ASUS_Z00AD using Tsikot Forums mobile app

[travajante]

Racing Beat M3 Hatch Axlebacks have landed!!!!...Limited kits.



Built in the USA, the Racing Beat Power Pulse Mazda 3 Exhaust System for the 2014-16 Mazda 3 Skyactiv 5-Door (2.0/2.5, will fit in a 1.5 w/ just minor filing of the 2 flange holes on the RB end) is a full 304-stainless steel exhaust designed specifically for the Mazda 3 Skyactiv application. Initially designed for Mazda's Club Sport project vehicle, this exhaust made its debut at Mazda's 2013 SEMA Show booth in Las Vegas.

The Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system is a direct replacement for the factory system and utilizes all stock hangers and mounting brackets to ensure a secure fit. Manufactured in-house by Racing Beat using 2.375" OD stainless steel outlet tubing and stainless steel flanges for excellent durability, this exhaust system offers an excellent balance of appearance and performance. Finished with our aggressive 4" OD stainless steel S-Tip, the Racing Beat* Mazda 3 Skyactiv exhaust system looks as great as it performs. The easy-to-install Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system comes complete with all required mounting hardware and gaskets.

All Racing Beat exhaust components are tuned in-house to provide a balance of tone quality and aggressive spirit. The Mazda 3 Skyactiv exhaust has been developed for use on the Skyactiv engine and produces a very deep, low exhaust note - without any harsh, buzzy, or droning sounds. Whether driving in-town or on the highway, the Racing Beat exhaust system produces an ideal tone to match the personality of the fun-to-drive and sporty Mazda 3 Skyactiv!

On my buddy's M3Speed:


On the hobo 1.5:


Power gains:




For details, please email
satravajante*gmail.com
Thanks & a blessed weekend!

[oliverS]

Racing Beat M3 Hatch Axlebacks have landed!!!!...Limited kits.



Built in the USA, the Racing Beat Power Pulse Mazda 3 Exhaust System for the 2014-16 Mazda 3 Skyactiv 5-Door (2.0/2.5, will fit in a 1.5 w/ just minor filing of the 2 flange holes on the RB end) is a full 304-stainless steel exhaust designed specifically for the Mazda 3 Skyactiv application. Initially designed for Mazda's Club Sport project vehicle, this exhaust made its debut at Mazda's 2013 SEMA Show booth in Las Vegas.

The Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system is a direct replacement for the factory system and utilizes all stock hangers and mounting brackets to ensure a secure fit. Manufactured in-house by Racing Beat using 2.375" OD stainless steel outlet tubing and stainless steel flanges for excellent durability, this exhaust system offers an excellent balance of appearance and performance. Finished with our aggressive 4" OD stainless steel S-Tip, the Racing Beat* Mazda 3 Skyactiv exhaust system looks as great as it performs. The easy-to-install Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system comes complete with all required mounting hardware and gaskets.

All Racing Beat exhaust components are tuned in-house to provide a balance of tone quality and aggressive spirit. The Mazda 3 Skyactiv exhaust has been developed for use on the Skyactiv engine and produces a very deep, low exhaust note - without any harsh, buzzy, or droning sounds. Whether driving in-town or on the highway, the Racing Beat exhaust system produces an ideal tone to match the personality of the fun-to-drive and sporty Mazda 3 Skyactiv!

On my buddy's M3Speed:


On the hobo 1.5:


Power gains:




For details, please email
satravajante*gmail.com
Thanks & a blessed weekend!

dayum.. could only dream of havich one such as this..

[travajante]

dayum.. could only dream of havich one such as this..

This was the same dream I had. Mine was a long story of an answered prayer. Grateful to this day....
Rare opportunity here....
Build quality & fitment on these are top-notch. Welds are clean & they don't have Borla syndrome of insulation spitting. Plus....DIYable even without a lift.

Sent from my ASUS_Z00AD using Tsikot Forums mobile app

[xsist]

No Check Engine Light?

Sent from my ASUS_Z00AD using Tsikot Forums mobile app

None sir. Is this something that i should be worried about?

Sent from my SM-N910C using Tsikot Forums mobile app

[travajante]

None sir. Is this something that i should be worried about?

Sent from my SM-N910C using Tsikot Forums mobile app

Have it checked, sir....the 2.0 can even log 240+kph w/o tune.

Sent from my ASUS_Z00AD using Tsikot Forums mobile app

[Doctsakititoy]

None sir. Is this something that i should be worried about?

Sent from my SM-N910C using Tsikot Forums mobile app

Or your shifter might have been in +/- mode and you were stuck in 4th or 5th gear. You wouldn't have shifted gears until you did it manually.

[travajante]

*Edited Post w/ Sound Clip:
Racing Beat M3 Hatch Axlebacks have landed!!!!...Limited kits.



Built in the USA, the Racing Beat Power Pulse Mazda 3 Exhaust System for the 2014-16 Mazda 3 Skyactiv 5-Door (2.0/2.5, will fit in a 1.5 w/ just minor filing of the 2 flange holes on the RB end) is a full 304-stainless steel exhaust designed specifically for the Mazda 3 Skyactiv application. Initially designed for Mazda's Club Sport project vehicle, this exhaust made its debut at Mazda's 2013 SEMA Show booth in Las Vegas.

The Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system is a direct replacement for the factory system and utilizes all stock hangers and mounting brackets to ensure a secure fit. Manufactured in-house by Racing Beat using 2.375" OD stainless steel outlet tubing and stainless steel flanges for excellent durability, this exhaust system offers an excellent balance of appearance and performance. Finished with our aggressive 4" OD stainless steel S-Tip, the Racing Beat* Mazda 3 Skyactiv exhaust system looks as great as it performs. The easy-to-install Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system comes complete with all required mounting hardware and gaskets.

All Racing Beat exhaust components are tuned in-house to provide a balance of tone quality and aggressive spirit. The Mazda 3 Skyactiv exhaust has been developed for use on the Skyactiv engine and produces a very deep, low exhaust note - without any harsh, buzzy, or droning sounds. Whether driving in-town or on the highway, the Racing Beat exhaust system produces an ideal tone to match the personality of the fun-to-drive and sporty Mazda 3 Skyactiv!

On my buddy's M3Speed:


On the hobo 1.5:


Power gains:


Sound Clip:
Racing Beat Skyactiv 2.0L Mazda 3 Axle-back Exhaust - YouTube

For details, please email
satravajante*gmail.com
Thanks & a blessed weekend!

[elodeon]

Thanks for the warm welcome Sir Travajante! Ive been mulling over what upgrades to get and here's what i have planned so far:
1. Of course, your infamous plate relocator
2. Seatmate's seat covers (any feedbacks?)
3. OEM 18's

Thats about it! Will keep it as simple as possible


Sent from my iPhone using Tapatalk

i got seatmate's seat cover. no complaint on the quality and the best thing is that they already have the 3's measurement and the design of the 2.0's leather seats. so just a quick payment on your 1st visit then you come back for the installation. the latter just takes an 1 hour and very snug fit.

[mnm88]

i got seatmate's seat cover. no complaint on the quality and the best thing is that they already have the 3's measurement and the design of the 2.0's leather seats. so just a quick payment on your 1st visit then you come back for the installation. the latter just takes an 1 hour and very snug fit.

Appreciate this Sir elodeon! Already went and paid for the dp. Covers will be done on Thursday next will be sir travajante's relocator


Sent from my iPhone using Tapatalk

[oneian]

*Edited Post w/ Sound Clip:
Racing Beat M3 Hatch Axlebacks have landed!!!!...Limited kits.



Built in the USA, the Racing Beat Power Pulse Mazda 3 Exhaust System for the 2014-16 Mazda 3 Skyactiv 5-Door (2.0/2.5, will fit in a 1.5 w/ just minor filing of the 2 flange holes on the RB end) is a full 304-stainless steel exhaust designed specifically for the Mazda 3 Skyactiv application. Initially designed for Mazda's Club Sport project vehicle, this exhaust made its debut at Mazda's 2013 SEMA Show booth in Las Vegas.

The Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system is a direct replacement for the factory system and utilizes all stock hangers and mounting brackets to ensure a secure fit. Manufactured in-house by Racing Beat using 2.375" OD stainless steel outlet tubing and stainless steel flanges for excellent durability, this exhaust system offers an excellent balance of appearance and performance. Finished with our aggressive 4" OD stainless steel S-Tip, the Racing Beat* Mazda 3 Skyactiv exhaust system looks as great as it performs. The easy-to-install Racing Beat Power Pulse Mazda 3 Skyactiv exhaust system comes complete with all required mounting hardware and gaskets.

All Racing Beat exhaust components are tuned in-house to provide a balance of tone quality and aggressive spirit. The Mazda 3 Skyactiv exhaust has been developed for use on the Skyactiv engine and produces a very deep, low exhaust note - without any harsh, buzzy, or droning sounds. Whether driving in-town or on the highway, the Racing Beat exhaust system produces an ideal tone to match the personality of the fun-to-drive and sporty Mazda 3 Skyactiv!

On my buddy's M3Speed:


On the hobo 1.5:


Power gains:


Sound Clip:
Racing Beat Skyactiv 2.0L Mazda 3 Axle-back Exhaust - YouTube

For details, please email
satravajante*gmail.com
Thanks & a blessed weekend!

Ordered mine. Now we wait!

[mnm88]

Sirs, okay ba yung Rhino Lip from Clifford? Thinking of ways kasi na hindi magasgasan yung underside ng bumper due to steep slopes. Hassle sumayad ng konti 1 time. TIA!


Sent from my iPhone using Tapatalk

[travajante]

Ordered mine. Now we wait!

Checked Racing Beat Packaging for you, oneian sir. They packed it well. All good & awaiting pick up by forwarder.
Grats & thanks!!!!

[travajante]

A review on the Pinoy Original No-Drill Plate Relocator from across the Pacific...

"The kit is an excellent product. The molded piece fits into the lower grill with no ambiguity and no adjustment required, and the metal bracket aligns easily with the bolts during installation.

I used a plate adapter from Amazon that is the perfect companion to this kit for folks in the U.S. The slots are recessed to make room for the bolt heads under the plate (a thin-wall 11mm socket works perfectly to snug them up), and the middle slot puts the bottom of the plate roughly even with the bottom of the front of the car.

I recommend this kit!"


For M2 & M3 Plate Relocators, please email
satravajante*gmail.com
Thanks!!!!


Sent from my ASUS_Z00AD using Tsikot Forums mobile app

[oneian]

Installed!

I drove for about 300km right after installing the exhaust. This thing is nice - deep tone, not loud, no highway drone (like it's not there actually).

Very smooth and not ricey at all.

If you like loud and obnoxious sound, don't get this. If you like actual power increase, I highly recommend this.

Note: It's a plus that it made my aftermarket intake sound better

[sparcom2]

Wow, very nice! Yan din gusto ko, not loud pero may power increase. Installing this will void the warranty?


Sent from my iPad using Tapatalk

[oneian]

Wow, very nice! Yan din gusto ko, not loud pero may power increase. Installing this will void the warranty?

Sent from my iPad using Tapatalk

Nope, not at all!! I checked this with my mazda dealer.