Isuzu Dmax Owners [ARCHIVED]

[Djerms]

My attitude has always been that with a ride comes great responsibility, in health and most importantly, in sickness .

Hoy MR,
Ginaya mo naman si SpiderMan pre eh.

Otep,
I'm 400kms shy of my 20tkms check-up. Baka maunahan mo pako. Basta balitaan kita if ever man mauna ako.

[ian_rex]

tama si sir otep. its a matter of choice. sa amin, kami na mismo ang gumagawa kapag kaya naman. pag medyo major, saka pa lang ipapagawa sa labas.

[Memphis Raines]

Hoy MR,
Ginaya mo naman si SpiderMan pre eh. :

Sino yun? Dmax owner din?

Read that your saving up for OMEs, does that mean you're not gonna sell your Max anymore?

[cardo]

Hey guys,

meron ba sa in yo nakaexperience ng squeaking brakes?

thanks

[ian_rex]

meron. apparently, madumi yung mismong brake pad at rotor- sa harap. kaya nilinis na lang.

malapit ko na ulit ipagawa yung bintana ko sa likod. nasira yung window riser e.

[Memphis Raines]

Guys, a friend of mine who also has a Dmax advised me to warm-up the engine at least 10 minutes before driving it to avoid fuel knocking .

I know what fuel knocking is because I used to experience this in my old Pajero. It was caused by pockets of air in the fuel line and we solved this by bleeding the line.

Has anyone of you experienced fuel knocking in your unit?

[cardo]

meron. apparently, madumi yung mismong brake pad at rotor- sa harap. kaya nilinis na lang.

malapit ko na ulit ipagawa yung bintana ko sa likod. nasira yung window riser e.

hi, did the squeaking stop after the cleaning? I've replaced my pads with bendix. Ok naman at nawala by 60-70% yun squeaking, pero meron parin. hmmm I'm thinking the discs need to be replaced, but the mechanic and the casa mentioned it was still ok... what do you guys think?

if in case the discs are defective, are there any aftermarket discs around?

the squeaking sound is just very annoying minsan di ko na kelangan magbusina kase preno pa lang naririning na ng tao hehehe

thanks

[Djerms]

Cardo,
Experienced it also. Unfortunately my rotors got scratched na by those damn orig pads of Isuzu. I replaced mine with bendix and so far so good. Pero yung squeaking hindi na nawala sakin every morning but after a few kilometers nawawala naman.

As long as your braking is fine, do not reface your rotors. Minsan mas lalo pang nagkakaproblema. Okay ang bendix. Softer than the origs and gives great braking power.

MR,
Hehe, mukhang aatras muna ako sa Strada. Nag-iipon din kasi for the future.

[ian_rex]

hi, did the squeaking stop after the cleaning? I've replaced my pads with bendix. Ok naman at nawala by 60-70% yun squeaking, pero meron parin. hmmm I'm thinking the discs need to be replaced, but the mechanic and the casa mentioned it was still ok... what do you guys think?

if in case the discs are defective, are there any aftermarket discs around?

the squeaking sound is just very annoying minsan di ko na kelangan magbusina kase preno pa lang naririning na ng tao hehehe

thanks

yes. but it already left a groove on my rotors. darn.

Djerms,

how much yung bendix mo? saka saan meron? may part number ka ba?

thanks!

[Djerms]

Cardo,
Read back ka sa thread na ito. Naibigay ni ARB ang correct part number for the pads. I think that was pHP1200 a pair na yun. Sorry nakalimutan ko part number.

BTW I got it sa servitek station marcos Hiway.

[ian_rex]

Guys, a friend of mine who also has a Dmax advised me to warm-up the engine at least 10 minutes before driving it to avoid fuel knocking .

I know what fuel knocking is because I used to experience this in my old Pajero. It was caused by pockets of air in the fuel line and we solved this by bleeding the line.

Has anyone of you experienced fuel knocking in your unit?

how do we detect it? i mean, anong signs to be sure i'm suffering from fuel knocking?

[jarhead]

meron. apparently, madumi yung mismong brake pad at rotor- sa harap. kaya nilinis na lang.

malapit ko na ulit ipagawa yung bintana ko sa likod. nasira yung window riser e.

ha? db kaka ayos pang sayo ian?

[jarhead]

heto ginawa namin sa plastic pulley ian_rex.... meorn metal brace sa loob....

[jarhead]

guys, took this from a newspaper. philipine star.... whta ya think. no brand and no office being stated but meron contact number...

[ian_rex]

heto ginawa namin sa plastic pulley ian_rex.... meorn metal brace sa loob....

sir jarhead, ano ito custom-made na pulley? paano yung materials?

[jarhead]

Guys, a friend of mine who also has a Dmax advised me to warm-up the engine at least 10 minutes before driving it to avoid fuel knocking .

I know what fuel knocking is because I used to experience this in my old Pajero. It was caused by pockets of air in the fuel line and we solved this by bleeding the line.

Has anyone of you experienced fuel knocking in your unit?

hirap ata mangyari yan memp.... kc EFI na dmax natin the fuel injection pumo could detect if there is something wrong sa fuel... you dont need to warm it up for ten minutes.... grabe naman nun... hehehe.... and basta everytime magchange oil kayo, sabay narin drain ang sedimentor which is located underneath the chasis at the driver side....

[ian_rex]

ako honestly, pinapainit ko yung engine for at least 5-10 minutes kasi para dun sa turbo. pero i do it by driving slowly para pag dating sa may NLEX, ok na yung engine temp. pwede na bumirit. hehehe.

[jarhead]

sir jarhead, ano ito custom-made na pulley? paano yung materials?

its just your old pulley... meron lang nilagay na metal sa loob.. pinapagawa lang yan sa machine shop ang metal.... square ang metal and the size or dimensions is patterned after the motor...

[Djerms]

Ian,
10minutes warm up is already overkill. It does more harm to your engine this way. Warm-up your engine 3-5minutes, then drive off slowly.

As for the fuel knoking, there must be something wrong with the injectors. I doubt if this has anything to do with warming up your rig.

HTH

[x_jason_x]

guys, took this from a newspaper. philipine star.... whta ya think. no brand and no office being stated but meron contact number...

dude kung balak mo bumili diyan.. magingat ka lang. Kasi for me, ang binabayaran mo sa HID is yun warranty and yun dali nila kausap. Almost lahat kasi ng HID same lang ang buga.


by the way, im selling HID. 12,000php price ko. Xenoptics brand. Hi-halogen and Low-HID para magamit pa rin flasher. I have all bulb temperatures.