Isuzu Dmax Owners [ARCHIVED]

**ARB** · November 28th, 2006 08:14 AM

error proof. you can even DIY the experimentation. I used to do it by myself, it takes mga 3-4 hours with breaks.

**jarhead** · November 28th, 2006 09:42 AM

Originally Posted by srbogoy

jarhead,, sa summit dito sa cebu dyan ang punta ko sa bohol paikot-ikot dyan. naghahanap pa ako ng 20" inches rims pero di na chrome ikabit ko, plano ko gunmetal finish lang, sawa na sa chrome....

ganun b... pwede rin punta ka dito... just tell me kung pupunta ka....

meron ka ba close up pic sa mags mo ngaun?

**jarhead** · November 28th, 2006 04:49 PM

guys, just replaced the batt sa dmax ko....

after 2 years plus kong gamit napalitan narin...

**Djerms** · November 28th, 2006 10:52 PM

Originally Posted by jarhead

guys, just replaced the batt sa dmax ko....

after 2 years plus kong gamit napalitan narin...

Same here. Just got a Motolite Enduro 3sm last week. My factory batt lasted for 19mos.

**Memphis Raines** · November 28th, 2006 10:59 PM

Originally Posted by jarhead

guys, just replaced the batt sa dmax ko....

after 2 years plus kong gamit napalitan narin...

Tagal rin ah. Maintenance free na pinalit mo?

**2Dmax** · November 29th, 2006 06:56 AM

Originally Posted by Djerms

Same here. Just got a Motolite Enduro 3sm last week. My factory batt lasted for 19mos.

did you remove also the plastic battery holder just to fit in the Enduro 3SM battery? it has a larger size compared to D26 (required battery size in DMAX)?

**Djerms** · November 29th, 2006 07:18 AM

2Dmax,

Nope. I didn't remove anything. May allowance yung plastic plate underneath to fit a 3sm batt. The holder on top fits just right. At first you'll think that it won't fit...better try it again.

**2Dmax** · November 29th, 2006 07:21 AM

Originally Posted by Memphis Raines

Tagal rin ah. Maintenance free na pinalit mo?

It's better to use MF batteries because of the different cover design and their exhaust vent is located at the side so during the process of charging and discharging, acid fumes/mist will just drop along the sides (tutulo lang with a little acid mist due to cover with maze-type design). Sa mga non-MF like ung mga dry-charged (the ones with off-set screw plugs on the top and nilalagyan ng acid for activation), during the proces of charging and discharging, acid vapors/fumes/mist are released upward without control so nababasa ng acido ung mga inside parts ng engine bay natin, which can cause corrosion and oxidation of metal parts. reliable din and non-MF but it is highly recommended for vehicles where batteries are located outside the engine bay. example nito ung mga owners na nasa bumper ung batteries.

sa motolite kasi ko nagtratrabaho....

**jarhead** · November 29th, 2006 10:12 AM

Originally Posted by Memphis Raines

Tagal rin ah. Maintenance free na pinalit mo?

yup maintenace free kinuha ko.. enduro rin na matolite....

**jarhead** · November 29th, 2006 10:16 AM

tinanggal ko yun balck pastic kc the battery was longer than the orig the stock wa just around 8inches.. the one i put in now is the 1foot long... kung baga 13 plates nailagay ko ngaun..

.. ganda sa wiring kit kc mas lalong malakas ang ilaw ko last nyt when i used the dmax.... hehehehehe..... dami uli mapikon sa ilaw ng dmax ko... like our mazda before... hehehehehehe......