Isuzu Dmax Owners [ARCHIVED]

[ARB]

usually if palitan ng front speakers, the plastic surround ng speakers ang tinitrim. or it is taken out completely and replaces with a wood/mdf spacer. or if there is no problem with the magnet hitting the insides or window mech straight replacement.

may post ako pics na naka DLS B6A in previous pages for referral.

[2Dmax]

salonika,

c dzracing * banawe gumawa ng sensors ko. Uhm umabot sakin mga less than 2k. 2 sensors yun. Ang sarap na umatras ngayon, no look na.

what brand un pre? sa chrome part ba nilagay?

[x_jason_x]

sakin sa plastic part in the middle ko pinalagay. Ayaw ko pabutas yun steel chrome bumpers, baka di magawa ng makinis.

ang tinrim yun metal part ng doors speaker panel. Kaunting kaunti lang tinrim.

[dlim]

Guys I need help. been wanting to buy a speaker for my dmax ( front speakers ) ano ba ang size nang front speaker nang dmax natin? what speaker can you recommend

i just replaced my blaupunkt velocity series with Focal polyglass V2S this pm, hehe sulit talaga........

[Djerms]

For those who put sand sa likod ng bed. Is there a way to wrap it in something na waterproof? May sacks of sand kasi ako ngayon but water sips in and get heavier. Plan ko ipabalot sa mga nag aapholstery shop para at least malinis tignan and waterproof na. What do you think guys?

[srbogoy]

Djerms - di ba maganda rin gamitin pambalot ang malalaking interior tubes at iseal ang magkabilang dulo, may nakita na ako dito sa thread natin noon.

[x_jason_x]

dlim,

sulit talaga ang focal. lalo na kung magandang amp gamit. By the way, what amp are you using?

[ronxr]

sir,ask ko lang. how much ba carryboy bed liner with hook and tie? ano ba mas ok yung plastic or spray on? thanks guys!

[ronxr]

lumalkas yung kalampag sa manubela dmax ko...huhuhu

[2Dmax]

sir,ask ko lang. how much ba carryboy bed liner with hook and tie? ano ba mas ok yung plastic or spray on? thanks guys!

para sa kin ung spray-on. mas malinis tignan. sa plastic drop liner posibleng mapasok ng tubig ung in-between so pueding kalawangin ung bed mo. if i'm not mistaken carryboy dropliner costs around 5.5k - 6.5k php..

[ronxr]

ok ill go for spray on.. 2dmax thanks!

[srbogoy]

ronxr - kung feel mong gusto mo ang dropliner dahil maganda tignan,, papaheran mo ng grease ang bedliner mo b4 installation para iwas kalawang..

[ronxr]

type ko nga yung dropliner sir eh. hanap me tomorow sa banawe. tnx sa tip sir

[2Dmax]

type ko nga yung dropliner sir eh. hanap me tomorow sa banawe. tnx sa tip sir

ingat na lang pre sa kalawang..

post your modifications/set-ups on your DMAX..

[Djerms]

ronxr - kung feel mong gusto mo ang dropliner dahil maganda tignan,, papaheran mo ng grease ang bedliner mo b4 installation para iwas kalawang..

What kind of grease kaya ang pwede? Yung sakin 2 years old na yung bedliner ko (drop-in). Hindi ko pa nachecheck. Kinalawang na kaya?

[ARB]

the carryboy plastic bedliner can be installed in less than 15 mins. if you plan to use this and your concern is rust, dirt accumulation. you can just take it out every month and clean the inside. walang screw naman yan no holes to be drilled.

the rust issue was before pa and common lang sa mga nissan power series pick-ups. so far sa years na we have been selling bedliners wala pa amn customer na bumalik na rusted na ang bed nila. if you are really concerned you can have the bed sprayed on with rustproof na 3M before installing the bedliner.

[Djerms]

Thanks ARB. Will do that. Thanks for the relief.

[paulbaguio]

the carryboy plastic bedliner can be installed in less than 15 mins. if you plan to use this and your concern is rust, dirt accumulation. you can just take it out every month and clean the inside. walang screw naman yan no holes to be drilled.

the rust issue was before pa and common lang sa mga nissan power series pick-ups. so far sa years na we have been selling bedliners wala pa amn customer na bumalik na rusted na ang bed nila. if you are really concerned you can have the bed sprayed on with rustproof na 3M before installing the bedliner.

Mga sir, yun din ang pinag pipili-an ko before. I went for the spray on type. ang ayaw ko lang sa plastic is madulas ang bed (Nag check ko sa Isuzu at umakyat sa bed nila) everything is going to move everywhere inside the bed. Maganda nga talaga tignan pero depende pa rin kung satisfied ka sa pag gamit mo. Kung porma lang talaga, ok talaga siya. Yung takot ko rin ay yung kalawang. Di natin maiwasan ang kalawang kase papasok at papaspok talaga ang tubig. But if you really want yung plastic, I recommend na either lagyan mo talaga ng rustproofing, or yung spray-on bedliner before mo lagyan ng plastic bed liner (just like ARB said). medyo doble gastos nga lang pero kampante ka na di na kakalawang.

However, kung lalagyan mo lang din naman ng carryboy roller up which is what i did, mag spray on ka na lang at pang dagdag mo na lang sa roller up ang cost.. .. natatago din naman siya under the roller up so sayang ang porma. Though hindi makapasok ang tubig sa loob dahil may roller up na, dun naman papasok ang tubig sa metal bed...

To ARB,
Baka wala pang bumalik, dahil di pa nila tinitignan, or tinutuklap kung meron na rust... ...joke

[paulbaguio]

For those who put sand sa likod ng bed. Is there a way to wrap it in something na waterproof? May sacks of sand kasi ako ngayon but water sips in and get heavier. Plan ko ipabalot sa mga nag aapholstery shop para at least malinis tignan and waterproof na. What do you think guys?

hi Djerms,
Naka Roller up ka ba?
How much kilos ang sack mo?
Kung aabutin ng 40-50 kilos, the Roller-ups would be in that range too.
double purpose.

[Djerms]

Paulbaguio,

Yup sabi nga ni Jason (naka roller-up siya) kaso wala pang budget for that eh. hehe. Budget ko pang 50 kilos na buhangin lang. hahaha.