Honda CRV [continued]

[Archerfish]

1999 crv or 2003, 04 or 05?
money range from 200k to 250k?
what to get? ang mahal kasi magbenta ng iba crv na 2nd gen naabot ng 300k

These are the usual prices, I just don't know why it is priced like that. Most people say that the first generation is way better than the second. Again, I don't know why as I don't have the second generation CR-V so I can't give any objective comparison except that I like the first generation CR-V.

The second generation looks like the "cousins" of Mitsubishi Adventure. Nothing wrong with adventure, I just don't like the headlight.

[dr. d]

Thank you for this reference. I won't patronize China brands (as much as possible), and I'll go with Yokohama which is locally manufactured here. It could be more expensive but in my small way I am able to help our local manufacturer

bravo!
tangkilikin ang sariling atin!

[Walter]

BF Goodrich?

[golfbumhk]

Mga Sirs advice naman po...

I've got 1st gen CRV ('97) and recently had it re-painted and minor issues fixed.
Now I wanna replace its stock rims/mags into a slightly bigger one, width and diameter.
Is dimension 18D / 7.5W about right or too big?

Or any size suggestion ?
Gusto ko sana yung medyo nakalabas lang ng konti yung mags.
Thanks in advance.
Cheers!

[Archerfish]

Mga Sirs advice naman po...

I've got 1st gen CRV ('97) and recently had it re-painted and minor issues fixed.
Now I wanna replace its stock rims/mags into a slightly bigger one, width and diameter.
Is dimension 18D / 7.5W about right or too big?

Or any size suggestion ?
Gusto ko sana yung medyo nakalabas lang ng konti yung mags.
Thanks in advance.
Cheers!

I've heard that riding comfort will change if you replace your rims with bigger ones​.

[golfbumhk]

I've heard that riding comfort will change if you replace your rims with bigger ones​.

Thanks for the reply, AF!
Have anyone here who opted for a bigger set of rims experienced a change of comfort level on your 'new' ride?
And what size of rims did you replace it with?
Thanks again

[crosswind]

Mga Sirs advice naman po...

I've got 1st gen CRV ('97) and recently had it re-painted and minor issues fixed.
Now I wanna replace its stock rims/mags into a slightly bigger one, width and diameter.
Is dimension 18D / 7.5W about right or too big?

Or any size suggestion ?
Gusto ko sana yung medyo nakalabas lang ng konti yung mags.
Thanks in advance.
Cheers!

According to my friends from a crv organization, it's like a ek civic where in even if you lower the ride height. The ride comfort would barely be compromise, same can be said with replacing the wheels.

Maybe you would want to go with JDM spec CRV such as the Fullmark and performa. Mugen specs parts for the 1st gen are hard to come by in the PH. EUDM spec CRV looks good to with the stock 16s available only for the European markets

Sent from my SM-A700FD using Tapatalk

[golfbumhk]

According to my friends from a crv organization, it's like a ek civic where in even if you lower the ride height. The ride comfort would barely be compromise, same can be said with replacing the wheels.

Maybe you would want to go with JDM spec CRV such as the Fullmark and performa. Mugen specs parts for the 1st gen are hard to come by in the PH. EUDM spec CRV looks good to with the stock 16s available only for the European markets

Sent from my SM-A700FD using Tapatalk

Good to hear...Thanks for the info *crosswind.
I have seen a lowered CRV fitted with a 17 inch BBS RS wheels and it looks great.
Might try a 17''...
Once again Thanks!

[papi smith]

I'm looking to buy a 4th gen CRV, tama ba ang price range ng 2012 is 650k-700k? How much was this when it was brand new back then? Any advise if I should get this year model, cheapest na kasi ito, but I think these are purely Japan CBU, yung 2013 and up ata ang hindi na. Any pointers or common issues look our for? Thanks.

[Walter]

As of Dec 2012 from ************
Honda CR-V
2.0 S 1.390M
2.0 LX 1.425M
2.4 SX 1.525M
2.4 EX 1.655M

Best to get the 2016 facelifted model ... 650T is quite high for 2012 ... 6 year depreciation so about 60% ... Price should be around 550T ... Normally 3-4 year old vehicles have the better depreciation value ... 2014-2015 ...

[chronicle]

As of Dec 2012 from ************
Honda CR-V
2.0 S 1.390M
2.0 LX 1.425M
2.4 SX 1.525M
2.4 EX 1.655M

Best to get the 2016 facelifted model ... 650T is quite high for 2012 ... 6 year depreciation so about 60% ... Price should be around 550T ... Normally 3-4 year old vehicles have the better depreciation value ... 2014-2015 ...

Makikisingit lang. How do you compute depreciation? Is it 10 percent per year?

Sent from my BLL-L22 using Tapatalk

[jut703]

Makikisingit lang. How do you compute depreciation? Is it 10 percent per year?

Sent from my BLL-L22 using Tapatalk

Market driven. Pickups and PPVs don't depreciate that much. Midsizers and anything with a big gas engine take a big hit right away.

Sent from my SM-G950F using Tapatalk

[Walter]

Usually 10% per year ... Plus another 10% or more ... That's when it's considered a good value ... Assuming vehicle is in excellent condition ...

[papi smith]

As of Dec 2012 from ************
Honda CR-V
2.0 S 1.390M
2.0 LX 1.425M
2.4 SX 1.525M
2.4 EX 1.655M

Best to get the 2016 facelifted model ... 650T is quite high for 2012 ... 6 year depreciation so about 60% ... Price should be around 550T ... Normally 3-4 year old vehicles have the better depreciation value ... 2014-2015 ...

Thanks, Sir Walter

I was focused on lowest price, i'll check the depreciated value of more recent models for comparison.

[chronicle]

Market driven. Pickups and PPVs don't depreciate that much. Midsizers and anything with a big gas engine take a big hit right away.

Sent from my SM-G950F using Tapatalk

Ok. Thats prolly the reason why cuv's are much more easier to obtain on the second hand market.

Usually 10% per year ... Plus another 10% or more ... That's when it's considered a good value ... Assuming vehicle is in excellent condition ...

Thanks. In 10 years pala, good as spare change na lang.

Sent from my BLL-L22 using Tapatalk

[sn0wbLind]

Crv 2014 2.0 gas users

Kamusta FC niyo? Napansin ko parang nakaka 5-6km/l na lang ako compared sa 7km/l ko 2years ago.

[MMBO]

Hi! First time buying a car. My 2 choices are the 2018/2019 CR-V and the Subaru Forester. Th Honda CR-V mainly for the looks in and out and more importantly the possibility of being the most value for money in the long run and Forester primarily for the safety reasons, it being not so common on the road and future travel/ camping car.

Here’s my question, I want to use a car for more than 5-10 or more years. Which one would you think will be the safest bet (maintenance/ cost and availability of parts)? I know very little about cars by the way.


Please help me out! And kindly point me to the appropriate thread if there’s already obe existing.

Ps. If the maintenance and cost of parts of the Honda’s are significantly lower than Subaru’s, I might just go with the CR-V then.

Thank you!

[vinrem]

Hi! First time buying a car. My 2 choices are the 2018/2019 CR-V and the Subaru Forester. Th Honda CR-V mainly for the looks in and out and more importantly the possibility of being the most value for money in the long run and Forester primarily for the safety reasons, it being not so common on the road and future travel/ camping car.

Here’s my question, I want to use a car for more than 5-10 or more years. Which one would you think will be the safest bet (maintenance/ cost and availability of parts)? I know very little about cars by the way.


Please help me out! And kindly point me to the appropriate thread if there’s already obe existing.

Ps. If the maintenance and cost of parts of the Honda’s are significantly lower than Subaru’s, I might just go with the CR-V then.

Thank you!

I'll get the CRV, PMS is cheaper and it's reliable.

Sent from my ONEPLUS A6003 using Tapatalk

[Sleepcare]

Hi! First time buying a car. My 2 choices are the 2018/2019 CR-V and the Subaru Forester. Th Honda CR-V mainly for the looks in and out and more importantly the possibility of being the most value for money in the long run and Forester primarily for the safety reasons, it being not so common on the road and future travel/ camping car.

Here’s my question, I want to use a car for more than 5-10 or more years. Which one would you think will be the safest bet (maintenance/ cost and availability of parts)? I know very little about cars by the way.


Please help me out! And kindly point me to the appropriate thread if there’s already obe existing.

Ps. If the maintenance and cost of parts of the Honda’s are significantly lower than Subaru’s, I might just go with the CR-V then.

Thank you!

If maintenance lang usapan, out na agad yung CRV diesel kasi sobrang mahal. Availability based on experience kapag small items lang mabilis Honda and vice versa sa big parts.

[MMBO]

If maintenance lang usapan, out na agad yung CRV diesel kasi sobrang mahal. Availability based on experience kapag small items lang mabilis Honda and vice versa sa big parts.

Salamat! Yung gasoline version ang plan namin sir. yung 2.0 CVT. Oo nga po, convenience din sa waiting time important samin. I've read somewhere like VW car owners having to wait 2 months bago dumating yung parts. Not sure if same si Subaru since Japan naman sya. But the price baka mas mahal since less demand.

I'll get the CRV, PMS is cheaper and it's reliable.

Sent from my ONEPLUS A6003 using Tapatalk

Salamat! As much as I want the Subaru, the cost of owning plays a big role in terms of long term use.



Sent from my ONEPLUS A6003 using Tapatalk[/QUOTE]