Honda Civic FD Body [continued]

[ozcity]

"tok" sound at the rear while hitting a bunp..already changed the shock top bushings andun pa din yung "tok" any idea kung ano yun?

Sent from my SM-G925I using Tapatalk

[ejm_110]

may experience po ba kayo sa JP wheels at good guys garage(cruven)?

Pinuntahan ko yung Revline kanina sa San Pedro Laguna, nagsara na daw pala sila, may nakakaalam kaya dito kung san sila lumipat?

Baka puntahan namin yung d&r bukas.

Thanks

Sent from my ONE A2001 using Tapatalk

[ads13]

wag kang magpapagawa sa revline, kung anu-ano ang sasabihin sayo na na sira in case hindi pa sila nagsara at lumipat lang.

Sent from my SM-N910C using Tapatalk

[ejm_110]

wag kang magpapagawa sa revline, kung anu-ano ang sasabihin sayo na na sira in case hindi pa sila nagsara at lumipat lang.

Sent from my SM-N910C using Tapatalk

Noted. Maybe dodge a bullet there. Isa kasi sila sa recommended shop ayon sa kabilang thread. Might try be mailed​ or d&r tomorrow. Thanks boss.

Sent from my ONE A2001 using Tapatalk

[ads13]

may experience po ba kayo sa JP wheels at good guys garage(cruven)?

Pinuntahan ko yung Revline kanina sa San Pedro Laguna, nagsara na daw pala sila, may nakakaalam kaya dito kung san sila lumipat?

Baka puntahan namin yung d&r bukas.

Thanks

Sent from my ONE A2001 using Tapatalk

yan ang mga pinagawa ko sa JP

Sent from my SM-N910C using Tapatalk

[ads13]

ito sa cruven sucat.
kung nakapunta ka ng san pedro, try mo ang benmawi

Sent from my SM-N910C using Tapatalk

[ejm_110]

ito sa cruven sucat.
kung nakapunta ka ng san pedro, try mo ang benmawi

Sent from my SM-N910C using Tapatalk

Thank you sir. San mo po mas prefer? JP or Cruven? customer experience wise.

undecided pa kami kung along shops sa sucat road or benmawi kami bukas.

Sent from my ONE A2001 using Tapatalk

[ads13]

Thank you sir. San mo po mas prefer? JP or Cruven? customer experience wise.

undecided pa kami kung along shops sa sucat road or benmawi kami bukas.

Sent from my ONE A2001 using Tapatalk

depende sa ipapagawa mo. pag pang ilalim, JP talaga ako nagpapagawa.
pag mga bushings lang ako sa cruven kasi kaya nila mag-fabricate

Sent from my SM-N910C using Tapatalk

[ejm_110]

depende sa ipapagawa mo. pag pang ilalim, JP talaga ako nagpapagawa.
pag mga bushings lang ako sa cruven kasi kaya nila mag-fabricate

Sent from my SM-N910C using Tapatalk

okay brad, parehas na lang namin puntahan. parehas kailangan ayusin tie rod tska bushings eh hehe. Salamat ng madami

Sent from my ONE A2001 using Tapatalk

[baludoy]

Alam ko sundays lang closed ang d & r.

Pero parang open na din sila pag sundays.nakita ko recently open ata sila nung napadaan ako papuntang mla memorial once on a sunday

to be or not to be, that always confuses me!

[ejm_110]

Napagawa na namin yung Civic namin, eto po report:

1. JP Wheels - Okay na okay yung mekanikong nag-assist sa amin, kahit obviously noob kami, tinuruan pa kami at di kami niloloko o pineperahan. Ang bilis din ng serbisyo nila. Pag suspension, dito din na ako palagi magpapagawa. Ang dami nagpapagawa dito.

2. Good Guys Garage (Cruven) - ang babait ng mekaniko tska nung amo/manager nila. Yung unang price sakin ng bushings eh mas mahal sa unang binigay niya sakin. Sinubukan ko tumawad (plano ko less 100-200 lang), di na ako pinatapos sa pagsasalita, siya na nagbitaw ng presyo at mas mura pa sa gusto ko. Ang mura nga talaga ng bushing nila kasi kaya ni gumawa mismo pero ang kapalit nun matagal mong aantayin, almost 2+ hours kami nagantay para lang sa bushings.

3. D & R - saglit lang kami dito pero ang bait nila kausap, okay din presyo, dahil gusto ko Honda ATF, talagang pinipilit pa nila kami gumamit ng aftermarket para mas maka-mura kami.

Overall, sulit ang punta namin sa tatlong yan. Yung quote samin ng isang malaking auto repair shop ay may kamahalaan pero dahil sa tatlong shop na yan, less then half pa yung nagastos namin.

Salamat ng marami sa recommendation niyo.

Next step, DIY na.

----
Questions:

1. Any reviews on Michellin Primacy tires? Any ideas how much?
2. Goal is comfort, which brand of tires could you recommend? (Sabi sa kabilang thread, touring type of tires). Currently we are using Yokohama A Drive.
3. Para sa mga DIYers na nagpapalit ng engine oil at transmission fluid drain, paano diskarte niyo sa disposal ng old fluids/oils/liquids?
4. Saang shop maganda pa detail? (Along Alabang, San Pedro, Binan, Sucat areas)
5. Saang shop maganda/mura paayos ng dents at repaint touchups (Along Alabang, San Pedro, Binan, Sucat areas)
6. Saan kayo bumibili ng part/fluids online?

Thanks in advance!

[ads13]

Napagawa na namin yung Civic namin, eto po report:

1. JP Wheels - Okay na okay yung mekanikong nag-assist sa amin, kahit obviously noob kami, tinuruan pa kami at di kami niloloko o pineperahan. Ang bilis din ng serbisyo nila. Pag suspension, dito din na ako palagi magpapagawa. Ang dami nagpapagawa dito.

2. Good Guys Garage (Cruven) - ang babait ng mekaniko tska nung amo/manager nila. Yung unang price sakin ng bushings eh mas mahal sa unang binigay niya sakin. Sinubukan ko tumawad (plano ko less 100-200 lang), di na ako pinatapos sa pagsasalita, siya na nagbitaw ng presyo at mas mura pa sa gusto ko. Ang mura nga talaga ng bushing nila kasi kaya ni gumawa mismo pero ang kapalit nun matagal mong aantayin, almost 2+ hours kami nagantay para lang sa bushings.

3. D & R - saglit lang kami dito pero ang bait nila kausap, okay din presyo, dahil gusto ko Honda ATF, talagang pinipilit pa nila kami gumamit ng aftermarket para mas maka-mura kami.

Overall, sulit ang punta namin sa tatlong yan. Yung quote samin ng isang malaking auto repair shop ay may kamahalaan pero dahil sa tatlong shop na yan, less then half pa yung nagastos namin.

Salamat ng marami sa recommendation niyo.

Next step, DIY na.

----
Questions:

1. Any reviews on Michellin Primacy tires? Any ideas how much?
2. Goal is comfort, which brand of tires could you recommend? (Sabi sa kabilang thread, touring type of tires). Currently we are using Yokohama A Drive.
3. Para sa mga DIYers na nagpapalit ng engine oil at transmission fluid drain, paano diskarte niyo sa disposal ng old fluids/oils/liquids?
4. Saang shop maganda pa detail? (Along Alabang, San Pedro, Binan, Sucat areas)
5. Saang shop maganda/mura paayos ng dents at repaint touchups (Along Alabang, San Pedro, Binan, Sucat areas)
6. Saan kayo bumibili ng part/fluids online?

Thanks in advance!

4. Big Bert's Sucat
5. OptionR


Sent from my SM-N910C using Tapatalk

[ejm_110]

4. Big Bert's Sucat
5. OptionR

Thanks papi!! Ang bilis nun ah, currently checking Big Bert's pricelist.

[ozcity]

down na ba website ng teamfd?

Sent from my SM-G925I using Tapatalk

[pobre24]

Napagawa na namin yung Civic namin, eto po report:

1. JP Wheels - Okay na okay yung mekanikong nag-assist sa amin, kahit obviously noob kami, tinuruan pa kami at di kami niloloko o pineperahan. Ang bilis din ng serbisyo nila. Pag suspension, dito din na ako palagi magpapagawa. Ang dami nagpapagawa dito.

2. Good Guys Garage (Cruven) - ang babait ng mekaniko tska nung amo/manager nila. Yung unang price sakin ng bushings eh mas mahal sa unang binigay niya sakin. Sinubukan ko tumawad (plano ko less 100-200 lang), di na ako pinatapos sa pagsasalita, siya na nagbitaw ng presyo at mas mura pa sa gusto ko. Ang mura nga talaga ng bushing nila kasi kaya ni gumawa mismo pero ang kapalit nun matagal mong aantayin, almost 2+ hours kami nagantay para lang sa bushings.

3. D & R - saglit lang kami dito pero ang bait nila kausap, okay din presyo, dahil gusto ko Honda ATF, talagang pinipilit pa nila kami gumamit ng aftermarket para mas maka-mura kami.

Overall, sulit ang punta namin sa tatlong yan. Yung quote samin ng isang malaking auto repair shop ay may kamahalaan pero dahil sa tatlong shop na yan, less then half pa yung nagastos namin.

Salamat ng marami sa recommendation niyo.

Next step, DIY na.

Thank you rin for sharing this. Sundan ko rin yan ginawa mo.

[baludoy]

down na ba website ng teamfd?

Sent from my SM-G925I using Tapatalk

Mukhang ganyan na nga.

Sayang pero Let's see if ma revive kasi nangyari na yan before

Speaking of w/c, bakit kaya na ban ako sa civic 8th gen web site. Ayaw ba nila ng non-north american ISPs? Dami pa naman matutunan doon

to be or not to be, that always confuses me!

[ozcity]

Mukhang ganyan na nga.

Sayang pero Let's see if ma revive kasi nangyari na yan before

Speaking of w/c, bakit kaya na ban ako sa civic 8th gen web site. Ayaw ba nila ng non-north american ISPs? Dami pa naman matutunan doon

to be or not to be, that always confuses me!

lots of DIY info sa tfd..thats i want to see...hindi ko kasi ma diagnose yung tok sound coming from the rear left side pag dumadaan sa speed hump

just waiting on my rear stab link..baka yun ang may problema..

Sent from my SM-G925I using Tapatalk

[ejm_110]

Hi Everyone,

I am looking for tires that would give me good grip and handling on both dry and wet conditions, as well as comfort, hopefully fuel efficiency too. I narrowed it down to 2 tires that is available near my area (free nitrogen) and their prices are almost the same. If you were in my place, which one would you pick?
A. Pirelli P7 Cinturato
B. Continental Conti Premium Contact 2

Questions:
1. Where to go for underwash? How much does it cost? (South area: Sucat, Alabang, San Pedro, Binan)
2. Is it worth it to undercoat? How much does it cost? How many years it will last?
3. Which way to go, undercoating or rustproofing?

Thank you all!

[jut703]

Hi Everyone,

I am looking for tires that would give me good grip and handling on both dry and wet conditions, as well as comfort, hopefully fuel efficiency too. I narrowed it down to 2 tires that is available near my area (free nitrogen) and their prices are almost the same. If you were in my place, which one would you pick?
A. Pirelli P7 Cinturato
B. Continental Conti Premium Contact 2

Questions:
1. Where to go for underwash? How much does it cost? (South area: Sucat, Alabang, San Pedro, Binan)
2. Is it worth it to undercoat? How much does it cost? How many years it will last?
3. Which way to go, undercoating or rustproofing?

Thank you all!

Pirelli, definitely. The P7 Cinturato is one of the best all rounders of Pirelli outside the PZero line.

How much did you get it per tire and what size?

Sent from my SM-N9208 using Tapatalk

[ejm_110]

Pirelli, definitely. The P7 Cinturato is one of the best all rounders of Pirelli outside the PZero line.

How much did you get it per tire and what size?

Sent from my SM-N9208 using Tapatalk

Thanks man!

Not yet changed, probably this Saturday. My tire size is 205/55R17, price at 4.5k.

Sent from my ONE A2001 using Tapatalk