Meh makuhanan ako ng filters of baldwin and fleetguards.. Both USA made... This coming week...
Usually mga common like bd28, b2, bt223, and for the fleetguards na mga common... Good thing is they are made in u.s.a,, madame na kasi na gawang china eh, pati itsura naging mukang china din...
Pm me if sino interested, i send nyo yung part number ng filters nyo for baldwin or fleetguard para by monday masabi ko availability and price....
All baldwin and fleetguard filters are made in u.s.a,,,
Gusto kong bilhan ng Baldwin yung Civic EK namin kaso di ko alam part number ng oil filter.Civic 1996 PH15A 1.5 LXi
96-00 Civic EK (1.6 li ) uses B1402 but B1431 (longer version of B1402) is better if you can find one.
Thanks mga sir.Baka kasi magkaiba size ng pang 1.6 VTi and 1.5 LXi. Just making sure.
![]()
sent you pm bro.
BT223
B7243
B1402, B1431
B161-S
B28
Madami pwede for the EK bro.
B7243, B1400, B1402, B1431, B161-S, B179. lengths of these range from 3-4 inches, outer diameter 3 inches. these would fit your EK for sure. I would recommend B1402 or the B7243 ( i have this on my GE now)
same thread sila. length lang nung filter pinagkaiba most likely. id go a little longer than stock. up to 4 inches is safe.
At par lang ba ang Valvoline compared to Baldwin & Fleetguard, if not better? How much po yung V0-106?
Lastly. Pwede naman yung DGU ko sa EK ano? 15W40. Sayang kasi yung natirang 1 liter hehe. Kaka-overhaul lang nun around 2 months ago and 20W50 ata ang ginamit na oil. Dapat yata nasa 10W40? Sayang I wasn't knowledgeable pa re: oils at that time.
Yup.
Valvoline V0-106 - 98% * 20 microns, 50% * 10 microns, nominal rating * 5 microns
Baldwin - 94% * 18 microns, 90% * 10 microns, Nominal rating * 12 microns
mas malaki lang ng onti yung Baldwin
refer to photo below:
selling Valvoline V0-106 for 300 each.
DGU is perfectly okay for the EK. Safe for the Catalytic converter as it only has spot on 1200 PPM of Zinc.![]()
Sige sir Miko, I hope you can inform me also. You previously sent me a Baldwin 7160, but the fleetguard fuel filter can not fit my local 4JG2, I am presently using a Vic 208A for the fuel. However, baka may equivalent din sila for the fuel, I will appreciate your information on this. Thank you