Results 2,731 to 2,740 of 5910
-
April 13th, 2008 08:22 PM #2731
mga magagaling mag detailing, tanong lang po.
ano ano po yung mga gamit sa pag 3 step detailing? ano pong procedures?
natatakot kasi akong pumangit ang pintura ng Explorer ko eh. Kaya magandang alagaan na hanggang bago pa.
maraming salamat po!
-
-
April 17th, 2008 11:17 PM #2733
hello,
ive seen a soft99 yellow clybar packaged with a detailer for mag wheels in concorde. Is the claybar the same that is used for the body? Can i use it in claying my white fort? how often can i clay my fort that has just been sealed at BB a week ago? tnx in advance for your help guys.
cheers,
don
-
-
April 20th, 2008 08:29 PM #2735
comrades,
just applied today the carlack68 that i bought last friday sa transhow sa mega..
ang hirap tanggalin nya...siguro next time dalhin ko na sa detailing shop atleast machine pa gamitin pang buff
paki-correct po yung process na ginawa ko kung tama.
1. apply the carlack68 sa roof
2. apply it on the hood
3. buff the roof
4. buff the hood
tama lang po ba yung time interval ng buff ko especially sa hood?
or should i let the carlack seats a little longer o dapat ba ilan sandali lang after i-apply e i-buff na agad..
-
April 23rd, 2008 11:09 AM #2736
-
-
June 1st, 2008 11:16 PM #2738
-
July 17th, 2008 01:18 AM #2739
parehong LSP ang sealant at carnauba. pero kung insistent ka talagang ilayer 'tong dalawa, usually sealant muna then carnauba, dahil kadalasan, ang rason, mas long lasting yung synth over yung carnauba and synth bond to the paint.
i believe may post somewhere within this thread regarding why some people put the carnauba on top of the sealant, and v.v. -- this is in relation with Chain's comment regarding your preferences: depth? shine? reflectivity.
hth.Last edited by B2Bomber; July 17th, 2008 at 01:54 AM.
-
July 26th, 2008 07:20 PM #2740
I have a cordless drill puede ko ba gamitin ito for buffing and polishing? me nakita kasi ako na pang buff na puede ikabit sa drill ko and what speed(rpm) do I need to set my equipment? Is 550 rpm adequate for the speed?
i still take edsa from time to time, when i can not avoid it. and the segments i do drive thru...
EDSA Rehab/Rebuild and Guadalupe Bridge Repair