Allocation of Internet Speed at home

[Syuryuken]

Yung CDRKING na may TOMATO FIRMWARE ang magandang pang limit.

[african888]

If it's the ZTE modem, walang control whatsoever dahil naka-hide ang advanced settings. Wala pang nakakaalam kung papano i-access ang admin account.

You'll need to buy your own WiFi router.

huawei echolife yong provided ni converge today. wala bandwith control.

bought an AC7, me bandwith control pero di kaya yong suggestion ni yubby. Per Mac Ad ang limit ng bandwith

[andsmv]

May TPlink ako dati na may min at max speed per device

Internet BW = 10Mbps

Phone A - Min 2Mbps Max 10Mbps
Phone B - Min 8Mbps Max 10Mbps

If both phones are using the internet, each can only use their minimum speed
If only phone A is using the internet, it can use the full 10Mbps speed.

[shadow]

Yung CDRKING na may TOMATO FIRMWARE ang magandang pang limit.

Meron pa bang CDR-KING ngayon?


Sent from my iPhone using Tapatalk

[Walter]

Or you can be friendly with the service guy and he might just give you the special admin password for your router ... PLDT installer gave theirs ...

[kisshmet]

Meron pa bang CDR-KING ngayon?


Sent from my iPhone using Tapatalk

Wala na pinasara na ni shopee at lazada

Sent from my SM-A520W using Tapatalk

[Syuryuken]

Meron pa bang CDR-KING ngayon?


Sent from my iPhone using Tapatalk

Wala na pinasara na ni shopee at lazada

Sent from my SM-A520W using Tapatalk

Nasa Lazada na

[african888]

May TPlink ako dati na may min at max speed per device

Internet BW = 10Mbps

Phone A - Min 2Mbps Max 10Mbps
Phone B - Min 8Mbps Max 10Mbps

If both phones are using the internet, each can only use their minimum speed
If only phone A is using the internet, it can use the full 10Mbps speed.

ok din yong ganito set up. pde ma maximize pag 1 lang user na nasa house. pero si ac7, max bandwith lang available.

[Mits]

1. identify the MAC address of every device that connects to your router.
2. In the LAN tab under Interface Setup page, assign each MAC address a static IP Address. Sa ginawa ko, yung mga priority devices ko ang may static IP address. The rest, Auto na lang.
3. Sa Bandwidth tab naman, still under Interface Setup page, may makikita kang Rules Summary. Edit ka ng isa to set the Download and Upload limits. Egress Bandwidth is Upload limit while Ingress is the Download limit. Sa case ko, Ingress lang ako naglimit. Tick on Enable sa Active na field para dun sa rule number na inedit mo para mag take effect yung ginawa mong rule.

Sa case ko, may 4 devices ako na priority, 2 laptops at 2 phones. Inassign ko sila sa address 192.168.254.100 - 103. Tapos yung Rule 1 ko is nakalimit to 1mbps ang IP addresses from 104 pataas. Meaning, yung priority devices ko utilize the maximum available bandwidth while yung mga devices na may IP address 104 pataas en hanggang 1mbps lang.

Tried running speedtest sa mga priority at hindi at nagreflect naman yung limit na sinet ko.

Thanks for replying. Naka pag set na ako and it's working. Concern ko na lang kasi sa previous modem ko kapag na reset nag-iiba mga IP, dito ba sa gan4pt na modem naka fix na yung IP?

[yubby24]

Thanks for replying. Naka pag set na ako and it's working. Concern ko na lang kasi sa previous modem ko kapag na reset nag-iiba mga IP, dito ba sa gan4pt na modem naka fix na yung IP?

Yung mga sinet mo sir as static IP will retain the IP address assigned to them kahit irestart. Nakailang patay na kami ng modem kapag aalis kami at walang maiiwan sa bahay. Pagbalik namin, di naman nabago yung assigned IP address ng mga static. Unless meron ka sir laptop na naka-Windows 10 tapos naka-enable yung random MAC address, magpapalit ng IP address yun kada connect nya sa modem mo kung via wifi.