New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 268 of 290 FirstFirst ... 168218258264265266267268269270271272278 ... LastLast
Results 2,671 to 2,680 of 2898
  1. Join Date
    Oct 2015
    Posts
    1,054
    #2671
    IMO 265 is the widest you can go on the stock 7" wide rims. Di na nga masyadong lapat yung 265. 7.5" siguro perfect sa 265. 285 needs a 8"-9" rim. Tire manufacturers normally state the minimum and maximum rim widths for each tire size. They vary between brands. If the bead spacing is really wide it will require a wider rim. If the space is smaller, narrower rims can be permitted. Kakasya naman yung 285 but you will have accelerated center wear. Going beyond the recommended tire size could also be dangerous.

  2. Join Date
    Nov 2009
    Posts
    3,509
    #2672
    Xploded view of my DIY FF lift pump, this time ginawan ko yung quick release ng adapter for valve stem para sa regular tire inflator/ foot pump.

    Attached Thumbnails Attached Thumbnails 1zlfzau.jpg  

  3. Join Date
    Jun 2014
    Posts
    130
    #2673
    Quote Originally Posted by 12vdc View Post
    Xploded view of my DIY FF lift pump, this time ginawan ko yung quick release ng adapter for valve stem para sa regular tire inflator/ foot pump.

    hi 12vdc,

    bro where have you been? dami namin naghanap sa you, it's nice to hear from you again.

  4. Join Date
    Oct 2015
    Posts
    1,054
    #2674
    Same here, good to have you back doc. Miss ka na namin.

  5. Join Date
    Jan 2014
    Posts
    1,851
    #2675
    Quote Originally Posted by 12vdc View Post
    Xploded view of my DIY FF lift pump, this time ginawan ko yung quick release ng adapter for valve stem para sa regular tire inflator/ foot pump.

    Hi bro musta. Magtagal din ka nawala dito kala ko nabenta mo na Navara mo. ?


    Sent from my iPhone using Tapatalk

  6. Join Date
    Nov 2009
    Posts
    3,509
    #2676
    Quote Originally Posted by rzeraus View Post
    hi 12vdc,

    bro where have you been? dami namin naghanap sa you, it's nice to hear from you again.
    Quote Originally Posted by Wh1stl3r2 View Post
    Same here, good to have you back doc. Miss ka na namin.
    Been to London to visit the Queen.hehe.

    Namasyal at nabusy lang mga bro, the modding and maintenance on free time nalang.

    Did some maintenance including prim/sec FF replacement tinkered how to use the onboard tire inflator instead of compressor para kahit saan abutin pwede palitan. I remembered na post ko nga pala dito sa tsikot ung original mod kaya napa post ulit. I'm seeing cracks on the fuel hose this will be my next mod replacing with polyurethane hose.

  7. Join Date
    Nov 2009
    Posts
    3,509
    #2677
    Quote Originally Posted by Leo_Arz View Post
    Hi bro musta. Magtagal din ka nawala dito kala ko nabenta mo na Navara mo. ?
    She remains faithful kaya pang haul pa rin included on the fleet. How's your Nav doing?

    I'm modding my daily with euro2 EGR, still looking for stainless steel sheet similar to the gasket that i could simply cut using aviation snips, any idea? Going to install on the exhaust since warrenty is still on. The shop where i used to buy SS doesn't have smaller gauge.


    Another job on queue nga pala, i had my tyres replaced at sagad na ang camber. Im suspecting the springs bottomed out na because of age and load. Buti nalang hindi ko parin naiikabit yung OME springs, sana mahanap ko pa kung saan ko naitabi. lol.

    Last edited by 12vdc; October 4th, 2016 at 11:08 PM.

  8. Join Date
    Jan 2014
    Posts
    1,851
    #2678
    Buti wala pa problema yan nav mo, approaching 100k na ako kinakabahan ako me mga sign ulit na flywheel problema, ingat na ingat ako 26k kms palang masira agad.
    Yung ss sheet mo sa soler anep Yung store dating tiptop yun dami ss sheet kahit scrap makakuha kadun.
    Mag blank ka na ba egr?


    Sent from my iPhone using Tapatalk

  9. Join Date
    Apr 2011
    Posts
    256
    #2679
    boss 12vdc long time no see!!! WB!!! mag iwan ka naman ng contact number mo para pag me mga katanungan kami mas madali ka naming ma kokontak :D

  10. Join Date
    Oct 2015
    Posts
    1,054
    #2680
    Quote Originally Posted by 12vdc View Post
    She remains faithful kaya pang haul pa rin included on the fleet. How's your Nav doing?

    I'm modding my daily with euro2 EGR, still looking for stainless steel sheet similar to the gasket that i could simply cut using aviation snips, any idea? Going to install on the exhaust since warrenty is still on. The shop where i used to buy SS doesn't have smaller gauge.


    Another job on queue nga pala, i had my tyres replaced at sagad na ang camber. Im suspecting the springs bottomed out na because of age and load. Buti nalang hindi ko parin naiikabit yung OME springs, sana mahanap ko pa kung saan ko naitabi. lol.

    Ano spring rate nung OME bro? Ang available lang nakita ko locally uprated from OEM. Dapa na rin yung front ko from the spacer lift. Ayoko sana ng matigas

    *Leo_Arz
    Sa Nissanparts.ph may naka list na single mass flywheel, DMF pa rin ba yung naikabit sa iyo?

    *jay185
    Musta na nav mo?

Tags for this Thread

Nissan Frontier Navara [continued]