Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]

[nelany]

How much kuha mo sir?

Sent from my GT-I9300 using Tsikot Forums Mobile App mobile app

5.2K yung kuha ko.

[TAZ13]

Napa calibrate ko na yung FM ko last saturday and so far solved na ang hard starting issues ng fm ko, 5k lang inabot sa mindanao diesel calibration center sa mindanao ave. 5k lang kasi napalitan na sa berrima ung injectors ko. Sayang lang tlaga yunv pinagawa ko sa berrima, if only i knew na di nila gagalawin injection pump di ko na pinagawa sa kanila.

[K.I.L.L.]

I thought Berrima was the best in the Philippines. Was your problem similar to Testament's?

[crazy_boy]

Hindi kasi kasama pump overhaul sa calibration ni berrima. For people who would not ask, they wouldnt know na injector tips replacement and dyno tuning lang ang gagawin.

Sent from my GT-I9300 using Tapatalk 2

[testament11]

I thought Berrima was the best in the Philippines. Was your problem similar to Testament's?

Nope. Mine was leaking injectors after Berrima replaced the nozzles. So far, Motorix has fixed those leaking injectors.

I agree with CB. Hindi talaga kasama yun paggalaw ng injection pump sa service nila. It's just that we're all used to pag sinabing "injection calibration", wherein talagang ibababa yun injection pump.

Lets say nalang na me and Taz learned a lesson here. For me, Berrima will still be the place to go when it comes to tuning our Pajero. Pero kung service na sa injection pump, we should consider nalang yun mga well known calibration centers like Malabon Diesel and Central Diesel.

[crazy_boy]

Nope. Mine was leaking injectors after Berrima replaced the nozzles. So far, Motorix has fixed those leaking injectors.

I agree with CB. Hindi talaga kasama yun paggalaw ng injection pump sa service nila. It's just that we're all used to pag sinabing "injection calibration", wherein talagang ibababa yun injection pump.

Lets say nalang na me and Taz learned a lesson here. For me, Berrima will still be the place to go when it comes to tuning our Pajero. Pero kung service na sa injection pump, we should consider nalang yun mga well known calibration centers like Malabon Diesel and Central Diesel.

dagdagan ko pa yung list mo

pag mga pipes (intercooler/exhaust), Brodeth is the go to guy

[testament11]

dagdagan ko pa yung list mo

pag mga pipes (intercooler/exhaust), Brodeth is the go to guy

Hahaha, Brodeth FTW!!!! Para kang nasa car show pag nandun ka

[crazy_boy]

Hahaha, Brodeth FTW!!!! Para kang nasa car show pag nandun ka

hehe maganda doon. hidden yung lugar. walang jeje nagpapagawa doon haha!

mga race cars ginagawa doon e. nakausap mo ba si brodeth? very humble guy

[testament11]

hehe maganda doon. hidden yung lugar. walang jeje nagpapagawa doon haha!

mga race cars ginagawa doon e. nakausap mo ba si brodeth? very humble guy

Oo pero not much kasi may ni-eentertain siyang isang customer. Sobrang tago talaga nun lugar at di mo aakalain may talyer pala sa ganung lugar

[crazy_boy]

Oo pero not much kasi may ni-eentertain siyang isang customer. Sobrang tago talaga nun lugar at di mo aakalain may talyer pala sa ganung lugar

before mas malaki luga yung talyer. ngayon mga 2/3 nalang natira. pinatayuan ng apartment yung corner e. pati sasakyan ng mga diplomats siya humahawak ng general repair

[K.I.L.L.]

dagdagan ko pa yung list mo

pag mga pipes (intercooler/exhaust), Brodeth is the go to guy

Where is his shop and what's the name man? Any contact info? Did you ever have any repairs done to your exhaust?

[crazy_boy]

Where is his shop and what's the name man? Any contact info? Did you ever have any repairs done to your exhaust?

they did the intake pipe for my previous ride. i think the owner's name is John Brodeth.

Brodeth Motorworks
5404 Gen. Luna St., Makati City
Tel No. 895-1589

[K.I.L.L.]

they did the intake pipe for my previous ride. i think the owner's name is John Brodeth.

Brodeth Motorworks
5404 Gen. Luna St., Makati City
Tel No. 895-1589

Thanks man! Nothing's wrong with mine but it's good to keep important information like this.

[CargoBoy]

Mga Sir - Na tow ang FM ko kanina along edsa dahil sa overheating. It is my wife that is driving it at bigla na lang daw huminto. Umandar naman after a while ng maitabi sa gasoline station. Naiuwi pa sa bahay. Kaso ang lakas ng alog ng makina pag naka preno pag ang tranny ay naka D drive. Bukod sa engine vibration hard starting na rin. Ano kaya dahilan ng post overheating issues na hard starting at engine vibration? Any suggested shop somewhere at QC na magaling sa ganitong problema? Salamat po.

[Monty]

Share ko lang, naglagay ako ng isang bote ng Ceratec nung isang araw. After two days, parang less ang vibration at noise (mas pino) ng makina (4d56). Sana hindi placebo effect. He he!

[crazy_boy]

Mga Sir - Na tow ang FM ko kanina along edsa dahil sa overheating. It is my wife that is driving it at bigla na lang daw huminto. Umandar naman after a while ng maitabi sa gasoline station. Naiuwi pa sa bahay. Kaso ang lakas ng alog ng makina pag naka preno pag ang tranny ay naka D drive. Bukod sa engine vibration hard starting na rin. Ano kaya dahilan ng post overheating issues na hard starting at engine vibration? Any suggested shop somewhere at QC na magaling sa ganitong problema? Salamat po.

Hindi kaya kumatok na yung engine?

Most likely hard starting yan kasi may tubig na sa loob ng makina (blown head gasket). Pag nag start, parang fog machine ba?

Sent from my GT-I9300 using Tapatalk 2

[TAZ13]

Nung dinala ko di last sat for calibration, nakita din na may leak ung isang injector ko. Sabi din ni mang ernie yung may ari ng mdcc na yung pinalit na nozzle tip ay hindi yung tlagang ginagamit for FM. Although pwede rin naman daw pero hindi yon ung first choice tlaga.

[testament11]

Nung dinala ko di last sat for calibration, nakita din na may leak ung isang injector ko. Sabi din ni mang ernie yung may ari ng mdcc na yung pinalit na nozzle tip ay hindi yung tlagang ginagamit for FM. Although pwede rin naman daw pero hindi yon ung first choice tlaga.

Kamote, kinabahan ako sa sinabi mong yan. Di mo ba natanong kung may effect ba kung hindi yun ang para sa 4M40 na nozzle? Tsaka sinabi rin ba sa iyo kung bakit may leak yun isang injector mo?

[crazy_boy]

Kamote, kinabahan ako sa sinabi mong yan. Di mo ba natanong kung may effect ba kung hindi yun ang para sa 4M40 na nozzle? Tsaka sinabi rin ba sa iyo kung bakit may leak yun isang injector mo?

mukhang magkakaroon ng bad record Berrima dito. mali yung copper washer tapos mali din injector tips?

kung totoo yan, kailangan i-bring up kay berrima yan

[zairus]

Guys, san pwese ipadiagnose via computer makina ng fm? Nakikita ba lahat ng problem ng makina?