Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]

[testament11]

Good am!

Saan kaya pwedeng bumili ng ATF Filter, part no. MR357710? Thanks.

Hmmm, pang Pajero Gen 2 ba ito? Kasi ang ginagamit namin dito eh MB166573

[nelany]

sama na yung regular na palit ng Coolant ...

Yan ang best prevention hehehe. Pag di napalitan yung coolant regularly talagang i coclog niya yung radiator at start na ng pressure build up.

[TAZ13]

Mga sir i was able to buy bosch brake pads kanina sa warren auto supply sa benavidez manila. Front 980, rear 800. Made in malaysia nakalagay.

[K.I.L.L.]

Good am!

Saan kaya pwedeng bumili ng ATF Filter, part no. MR357710? Thanks.

Give El Dorado a call.

[nelany]

Mga sir i was able to buy bosch brake pads kanina sa warren auto supply sa benavidez manila. Front 980, rear 800. Made in malaysia nakalagay.

Feedback mo performance once na nagamit mo na para alam ng lahat.

[nelany]

Mga sir i was able to buy bosch brake pads kanina sa warren auto supply sa benavidez manila. Front 980, rear 800. Made in malaysia nakalagay.

Ibigay mo narin yung part# ng pads para for reference ng lahat.

[Zeachrone]

My sweet treat to our beloved FM..:cool01::drive1::sunny:

[testament11]

Overheat ang inabot ko kahapon sa malakas na ulan. 6 na gas station kelangan ko hintuan para lang mawala ang overheat. Buti hindi pumutok ang plastic radiator top ko. At isang busted na thermostat ang dahilan kung bakit ako nag overheat. Malamig ang tubig after ng thermostat papunta sa radiator pero mainit yun tubig from makina to thermostat. Stuck up ang thermostat ko pala



Sent from my GT-N7100 using Tapatalk 2

[K.I.L.L.]

My sweet treat to our beloved FM..:cool01::drive1::sunny:

Looks good. Who did the installation and how much did it cost you? I've been wanting to do that myself.

[Zeachrone]

Looks good. Who did the installation and how much did it cost you? I've been wanting to do that myself.

Morimoto Mini H1 6.0 4300k with angel eyes worth 9500.. Item was shipped to me then I installed it myself.. You need a Set of tools, a Heatgun, and a lot of effort and patience.. Haha! Pero sulit ang pagod pagkatestdrive kinagabihan.. Previous lighting was an Osram Night Breaker at walang binatbat yun dito sa morimoto..
My problem this time is the ignition wire sa engine bay.. Di ko mahanap kung saan pagkakabitan ko nung redwire ng DRL na nabili ko.. Baka may idea ka pafs kung saan? I even tried tapping it on the ignition fuse but failed..

[crazy_boy]

BG, nelany, ang alam ko kasi, pag nag high pressure ang cooling system, dapat ang plastic top ang bibigay.

Pero aaminin ko, tempting talaga ang all aluminum rad bling bling pag bukas ng hood hehe

Sent from my GT-I9300 using Tapatalk 2

[nelany]

BG, nelany, ang alam ko kasi, pag nag high pressure ang cooling system, dapat ang plastic top ang bibigay.

Pero aaminin ko, tempting talaga ang all aluminum rad bling bling pag bukas ng hood hehe

Sent from my GT-I9300 using Tapatalk 2

Pag nag palit ka na ng radiator eh kunin mo yung all Al para ma satisfy yung type mo.

Anong brake fluid ang gamit mo?

[crazy_boy]

Hehehe hanap muna tayo ng all Al na radiator.

Shell brake fluid lang gamit ko

Sent from my Nexus 7 using Tapatalk 2

[nelany]

Hehehe hanap muna tayo ng all Al na radiator.

Shell brake fluid lang gamit ko

Sent from my Nexus 7 using Tapatalk 2

Ano yung Shell brake fluid DOT 3 or DOT 4?

[Pajd]

Sir, may part no. ba kayo ng akebono brake pad front and rear natin? plan ko kasi bumili bukas at pumunta ng banawe, hindi pa kasi napapaltan eversince lumabas sa casa.

btw, ano ba sya ceramic?

[nelany]

Yung front ay MZ690562 (Akebono, Made in Japan). Hindi pa ako nag papalit ng pang likod.

[K.I.L.L.]

Morimoto Mini H1 6.0 4300k with angel eyes worth 9500.. Item was shipped to me then I installed it myself.. You need a Set of tools, a Heatgun, and a lot of effort and patience.. Haha! Pero sulit ang pagod pagkatestdrive kinagabihan.. Previous lighting was an Osram Night Breaker at walang binatbat yun dito sa morimoto..
My problem this time is the ignition wire sa engine bay.. Di ko mahanap kung saan pagkakabitan ko nung redwire ng DRL na nabili ko.. Baka may idea ka pafs kung saan? I even tried tapping it on the ignition fuse but failed..

I'm a geek so I'm bad at DIY. I don't have an idea where you can connect that bit good luck with that wire.

[Pajd]

Yung front ay MZ690562 (Akebono, Made in Japan). Hindi pa ako nag papalit ng pang likod.

Ok copy, thanks sir nelany.

[Zeachrone]

I'm a geek so I'm bad at DIY. I don't have an idea where you can connect that bit good luck with that wire.

Same here boss.. I'm just a jobless nurse geek who loves troubleshooting and kalikuting anything.. Courage, faith and a little bit of luck is my key to a successful DIY..
Badtrip nga eh, yung nissan pickup ko madali ko lang nakabitan ng DRL pero etong FM hirap hanapin.. Hehe.. Pakabit ko na lang sa autoshop..

[testament11]

Testing...