Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]

[nelany]

Masungit din yung nanay ata, yung matandang lalaki medyo medyo nakakausap pa ng matino. Yung anak yung kausap ng nag install ng shock sa likod at yung pina check ko yung temp sensor ay ok naman. Tiningnan niya yung installation kung ok pay driving it. Na check din nung anak yung tranny support ko ng libre.Siguro kasi sa kanila ko binili yung shock at yung sensor ng na diagnose na hindi na accurate kaya di masungit.

[nelany]

mga sirs, UP ko lang yung inquiry ko regarding stainless piping ng intercooler natin. May improvements ba to sa sa performance or aesthetics lang? your comments are highly appreciated.

Yung sa akin ay using stainless kasi nag install ng devilsown sa intercooler ko. Mas maganda daw pasok ng mist.

[vicverion]

Yung sa akin ay using stainless kasi nag install ng devilsown sa intercooler ko. Mas maganda daw pasok ng mist.

Salamat po Sir, pano kung walang devilsown na nakainstall? Will it improves anything compared to rubber hose?

To Crazy_boy:
Sory sir di ako marunong mag post ng picture dito, pero yung box nya is a combination of White and Gray then may tatak na Mitsubishi Motors. Yung part number ng Oil Filter is 1230A046, then yung Fuel Filter part number is MB220900. Please send me your email address send kita ng photo.

[Paj699]

mga boss ask ko lang magkano ba oem n fog lights

[gearguru]

RE: Fuel gauge
Most likely baka sira nga ang float. Have it replaced nalang. I know someone here who recently changed/repaired his fuel float.

RE: Growling sound
Paanong growling? As in pagkatapos mag-off eh tsaka papasok yun sound?

RE: Aircon vents
I think nasa ganyan pa rin ang price niyan. Di naman masyado tumataas ang mga ganyang parts.

Thanks for the response. For the growling sound it's more of how the engine turns off...malakas garalgal niya. But after having it tuned up, ok na smooth na siya. Though I noticed na may minor vibration and rattle while driving...was told that transmission support needs to be replaced.

Again, sorry to ask everyone such a newbie question but my last visit to the shop costed me P16.3K (discounted pa from P17.5K). Services included replacing the transmission fluid, differential and front fan and axle fluid, radiator coolant, fan belt, power steering fluid, brake fluid (draining the old one as well) and of course tune-up. Is this too much or just right?

[testament11]

Again, sorry to ask everyone such a newbie question but my last visit to the shop costed me P16.3K (discounted pa from P17.5K). Services included replacing the transmission fluid, differential and front fan and axle fluid, radiator coolant, fan belt, power steering fluid, brake fluid (draining the old one as well) and of course tune-up. Is this too much or just right?

Yun mga fluid at belts ba eh ikaw may dala o sa shop mismo galing? Tsaka saang shop ka nagpaggawa?

[gearguru]

Yun mga fluid at belts ba eh ikaw may dala o sa shop mismo galing? Tsaka saang shop ka nagpaggawa?

Oils (Repsol), Filters (VIC), Belts and other Fluids all came from the shop. All in Cebu

[testament11]

Oils (Repsol), Filters (VIC), Belts and other Fluids all came from the shop. All in Cebu

Quite high pero not that much..

[crazy_boy]

May nago-offer sa akin ng local M/T na land cruiser 80 series. Napapaisip ako kung gusto ko ba hehe

[nelany]

May nago-offer sa akin ng local M/T na land cruiser 80 series. Napapaisip ako kung gusto ko ba hehe

CB, PM mo si Doc dumating na ata yung float switch mo.

[crazy_boy]

CB, PM mo si Doc dumating na ata yung float switch mo.

Nelany, natext ko na hehe papalit ka na ba ng stage 2 kit?

[nelany]

Nelany, natext ko na hehe papalit ka na ba ng stage 2 kit?

Ipapadala niya sa akin yung float switch mo ang sabi ko ay wala akong order na float swicth then sinabi ko na ikaw ang nag iintay ng switch.
Upgrade ko yung stage 1 ko sa FM sa stage 3. Me dala siya ng stage 3 kit na wala hindi pa available sa site nila o sa public. Add ko yung bagong controller nila at solenoid plus change ko yung nozzle na bagong design. Maintain ko yung old pump at yung mechanical controller sabi Doc. Yung solenoid daw ang icocontrol at hindi yung pump. Set na yung installation sa Berrima sa Friday.

[crazy_boy]

Bukas yung berrima sa Friday? Wow. Ok yung stage 3 ah. Yung nozzle location ba papalitan?

Sent from my GT-I9300 using Tapatalk 2

[nelany]

Bukas yung berrima sa Friday? Wow. Ok yung stage 3 ah. Yung nozzle location ba papalitan?

Sent from my GT-I9300 using Tapatalk 2

Next Friday pa sa Berrima. No change sa nozzle location, palit lang ng sizes (0.75 gph at 4 gph). Nagulat din ako, yung tanong ko sa upgrade ay stage 2 at yung sagot niya ay stage 2 or stage 3! Gastos na naman.

[ar24458]

Hi FM Peeps.

Chipped off na yung leather ng front seats ko...
medyo nabubutas na lalo sa driver side.

Do you recommend ipa-re-up ko ito sa seatmate?
Takot lng ako baka masira nila yung mechanism.

Anyone tried this?

[freeloader]

San ba may lavramon in cainta/marikina/antipolo area? Nalalayuan ako sa servitek kapitolyo. TIA.

Changed oil using top 1 sdo paired with baldwin bd28 and purolator fuel filter. Wala akong mabilhan ng baldwin fuel filter. Next week aircon cleaning at ceejays and a trip to malabon diesel.


Sent from my iPhone using Tapatalk 2

[crazy_boy]

Sa caltex sa tapat ng rob metro east meron sir

Sent from my GT-I9300 using Tapatalk 2

[freeloader]

Sa caltex sa tapat ng rob metro east meron sir

Sent from my GT-I9300 using Tapatalk 2

Thanks sana open tomorrow.


Sent from my iPhone using Tapatalk 2

[Battlestar]

Thanks sana open tomorrow.


Sent from my iPhone using Tapatalk 2

Sir pa update naman kung magkano inabot ng lavramon mo. Thanks!

[K.I.L.L.]

Hi FM Peeps.

Chipped off na yung leather ng front seats ko...
medyo nabubutas na lalo sa driver side.

Do you recommend ipa-re-up ko ito sa seatmate?
Takot lng ako baka masira nila yung mechanism.

Anyone tried this?

This has started happening to mine too. Where did you gentlemen have yours repaired?