Waaaaaa, ang mahal naman!!! Baka mag 7.5KVA nalang ako, magsiksikan nalang kami sa 1 room na may aircon.
Waaaaaa, ang mahal naman!!! Baka mag 7.5KVA nalang ako, magsiksikan nalang kami sa 1 room na may aircon.
Saw a CHina made 7.5 kva silent type diesel genset sa TV this pm. Selling for 140K. I'm sure mas mura sa labas. Maliit lang just a bit bigger than the open type gensets.
i think the price given here are all brand new, kaya expensive siya...
you can look for surplus japan, and will it cost you less than half of what we have here, same brand and good quality also. a lot of them can be sourced at quiapo.
we acquired our denyo 13 kVA diesel generator for around 160k lang, (i tried researching the price of a brand new unit with the same model unit from japan to be around 700k) although it's a second hand unit (total normal operating hours is just less than a year lang)
driven, hindi ba problema service & spare parts ng Denyo? May idea ka sa price ng used 7.5 & 10KVA gensets?
yan ang medyo affordable na diesel closed type gensets, meron kme Yamato 7kva ata, nasa 90k more or less
assemble na lang..open type nga lang
1. welder
2. prime mover, speed governor ng 4DR51 dati nasa 10k dati from malabon diesel
3. dynamo na 10kva nasa 10k din sa ongpin
may thread ako nito dati, may tsikoteer din na tumulong -- sayang di na sya active mag login
nope, widely available ang parts ng denyo sa quiapo... yun yung pinakamabentang surplus kasi eh... im not sure kung may ganun ka liit na models, mostly nakikita ko malalaki eh, sige try ko check dun sa nabilhan ko, kung gusto mo pwede mo rin check yung sa amin para makita mo kung sulit para sa inyo
Guys, gaano kalaking generator kailangan ko to power 1 (1.5hp) and 1 (1hp) aircon + 1 (12 cu. ft.) ref?
Yung mga gensets na ginawa ko kahit overnite pwede. Basta full tank ng diesel. Yung ginagawa ko kasi nilalagyan ko ng auxiliary fan before the radiator to simulate 40 km/hr speed, no overheat, tahimik.
Ang may tranny ay madaling paandarin at madaling patayin, kasi pwede disengage ang clutch. Pag walang clutch, yung armature ng alternator ay parang malaking bolante(flywheel) na may momentun kaya ayaw huminto agad ang genset. Pwedeng mabali ang crankshft nyo.
nakita ko sa isuzuphil website nila... powertrain series engine,,
sa Monday alamin ko nga presyo
balak ko mag assemble uli. Yong dati kasi, rat-infested na![]()
4LE2 engine.... about 200k, brandnew, naka loose parts ang instrument panel
now I must walk around binondo, how much ba 25kva dynamo at 1800rpm?
sa surplus kasi, nasa 300k na ang 30kva
up ko lang ito....bukas gagawin na yun MTS ko sa bahay...wala na siyang lever switch, bale 2 breaker na lang siya, picturan ko yun box ko pinasadya ko sa koten....
ito na yun MTS ko...
ito namna yun inside, switch off lang yun breaker sa right (Meralco) then switch on na yun sa left (gen set), meron siyang safety lever para hinde magsabay na ma switch on yun 2 breakers...
ito namna yun pinalagay kong outlet, para dyan i-plug yun genset....
![]()
newbie lang ako dito sa site.. however, i have some questions regarding gen sets.. i am not a technical guy kaya mas mabuti magtanong sa mga nakakaalam.. my questions might be too basic to some, pagpasensyahan na lang po..i intend to use a diesel powered generator as back-up power for the office which would utilize 1-2 1.5hp window type ac, 4 personal computers right now but intends to add max of 10 pcs, a laser printer, a micro ref, 4 long fluorescent lamps and 3 bulbs.. i don't know how to compute the load capacities of these office equipments that is why i would like to ask what would be the ideal rating in kva of a genset that i have to buy? once i know the ideal kva, then i could probably decide what genset to buy.. thanks in advance to whatever assistance you could provide me on this matter..![]()
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
pre baka me wiring diagram ka ng Suzuki SV7500..???
napakailaman kc ng mekanikong banka ang generator namin e.. dina maibalik ang dating wiring koneksyon... baka me maka help kung saan meron.... tnx po