Generator sets

[vvti2.0]

Ako mag assemble rin, mag order ako ng parts this week, yung yanmar na imitation na electric start (12 hp) and 5.5kVA dynamo then 5kVA AVR and pulleys and belts..

Mas favorable sa akin yung belt type kung di naman portable genset ang kailangan, low rpm and kung may masira man, pwede kalasin at palitan kahit walang mekaniko hehehe..

[badkuk]

guys, any brand/model suggestions? i'm leaning more towards promate, at least they got local service centers here.

[glenn manikis]

guys, any brand/model suggestions? i'm leaning more towards promate, at least they got local service centers here.

mag china brand ka nalang... 30k lang 6.2kva na gasoline...

[glenn manikis]

Good day mga sirs!
Ask ko lang po are used imported Ryobi generators from Australia any good? Can't afford Honda too expensive
Can you please advise, planning to buy one from a surplus shop. Sa tingen nyo sir mamoblema lng kung surplus sya?
Anyone used Promate generators from Ace hardware? are they any good?

Many thanks

mga honda sorry to say galing china din yan sir...

rhobi not sure...

[uls]

nagbebenta din po ba kayo ng electric generator lang? yung pde ikabit sa 7Hp engine bale ako na lang magaassemble. and saan po shop niyo sir? thanks.

sir wala po kami binebenta dynamo lang

banawe qc po

[Lew_Alcindor]

Good day mga sirs!
Ask ko lang po are used imported Ryobi generators from Australia any good? Can't afford Honda too expensive
Can you please advise, planning to buy one from a surplus shop. Sa tingen nyo sir mamoblema lng kung surplus sya?
Anyone used Promate generators from Ace hardware? are they any good?

Many thanks

Isa din yan sa mga options ko kaso wala naman halos warranty pag surplus.
May nakita akong isang seller sa sulit/olx. search mo yung janmike. meron siyang 2000w unit na may two months warranty. gamitin mo na lang ng regular within the two months. huwag lang abusuhin siguro.

[leinahtan]

Yey! Almost complete...

Posted via Tsikot Mobile app on S3LTE

[leinahtan]

Exhaust muffler ext pipe and active vent fan...

Posted via Tsikot Mobile app on S3LTE

[leinahtan]

Door handles and watertightness check na lang...

Posted via Tsikot Mobile app on S3LTE

[leinahtan]

Back view with the weatherproof power socket and small access door for checking and inspection of the back of the genset including its spark plug.

Posted via Tsikot Mobile app on S3LTE

[Lew_Alcindor]

Nice one leinaghtan.

What soundproofing material did you use?
Is it just an exhaust pipe extension?

[leinahtan]

Nice one leinaghtan.

What soundproofing material did you use?
Is it just an exhaust pipe extension?

It's just a stainless pipe 1/2" -enlarger coupling - 1" pipe - 1" elbow. Para di sakal yung usok kaya I thought of the enlarger.

Posted via Tsikot Mobile app on S3LTE

[Lew_Alcindor]

It's just a stainless pipe 1/2" -enlarger coupling - 1" pipe - 1" elbow. Para di sakal yung usok kaya I thought of the enlarger.

Posted via Tsikot Mobile app on S3LTE

Significant ba noise reduction? How about heat dissipation by the fan, enough ba? Gayahin ko yan pero sa smaller genset. Meron ako ngayon promate 3000w na nahiram, tantiyahin ko yung ingay.

Sent from my GT-N5100 using Tapatalk 2

[shibby75]

Wala palang 1800rpm na small diesel genset? All the same 3600rpm din, same as gas. At parang mas tahimik pa gas kesa disel na open type?

[leinahtan]

Significant ba noise reduction? How about heat dissipation by the fan, enough ba? Gayahin ko yan pero sa smaller genset. Meron ako ngayon promate 3000w na nahiram, tantiyahin ko yung ingay.

Sent from my GT-N5100 using Tapatalk 2

Tumahimik sya. Kasing ingay na lang sya ng old kelvinator window type ac namin eh. The active fan can reduce the heat from the inside kasi sa opposite side panel nito nilagyan ko rin ng passive ventilation holes.

Posted via Tsikot Mobile app on S3LTE

[glenn manikis]

Tumahimik sya. Kasing ingay na lang sya ng old kelvinator window type ac namin eh. The active fan can reduce the heat from the inside kasi sa opposite side panel nito nilagyan ko rin ng passive ventilation holes.

Posted via Tsikot Mobile app on S3LTE

sir... ingat po kayo may mga kilala ako... gumawa ng sarileng enclosure... nag cause ng sunog... (10kva pataas)

sa init ng exhaust pipe kadalasan nag start ang fire.... i suggest ample space and put fire retardant foam and top it with steel screen sa area ng exhaust pipe..

[leinahtan]

sir... ingat po kayo may mga kilala ako... gumawa ng sarileng enclosure... nag cause ng sunog... (10kva pataas)

sa init ng exhaust pipe kadalasan nag start ang fire.... i suggest ample space and put fire retardant foam and top it with steel screen sa area ng exhaust pipe..

Ok thanks for the precautions/suggestions. All areas of concern will be dealt with. Yung sa area ng pipe holding it from the panel may fireproof belt (I dont know what it is called) Yung nilalagay na holder sa tail pipe ng mga vehicles. Will still need to make minor mods sa areas where heat would mostly develop. My genset is just 4.5kva.

Posted via Tsikot Mobile app on S3LTE

[vvti2.0]

Wala palang 1800rpm na small diesel genset? All the same 3600rpm din, same as gas. At parang mas tahimik pa gas kesa disel na open type?

Basta direct coupled sir, expect a higher rpm, mapa diesel or gas, or yung mga air cooled, typical, highspeed.

Just purchased a Kubota replica made by Chingqong Golden Bow, 14 HP direct injection engine, i-drive nya sa ngayun ay 5kW na dynamo/alternator... Expected fuel cost for an 8 hour operation at around 2kW load is PhP 150.00 hehehe...

Yung direct coupled diesel na china made na sinasabi rated above 5kVA, is in real life 4kVA lang, aside from that 1 liter per hour ang consumption at around 50% load..

[vvti2.0]

Ok thanks for the precautions/suggestions. All areas of concern will be dealt with. Yung sa area ng pipe holding it from the panel may fireproof belt (I dont know what it is called) Yung nilalagay na holder sa tail pipe ng mga vehicles. Will still need to make minor mods sa areas where heat would mostly develop. My genset is just 4.5kva.

Posted via Tsikot Mobile app on S3LTE

Mukhang hindi magtatagal ang genset sa setup mo sir, hindi advisable sa genset ang kinukulong sa ganyan space... Kung radiator type yung genset mo, parang pwede i-ganyan, pero kung air-cooled, delikado.

[leinahtan]

Mukhang hindi magtatagal ang genset sa setup mo sir, hindi advisable sa genset ang kinukulong sa ganyan space... Kung radiator type yung genset mo, parang pwede i-ganyan, pero kung air-cooled, delikado.

google mo sir, maraming DIYs na genset enclosure. Air-cooled type is no exception. Buti pa nga yung genset may exhaust fan, bahay ko wala eh, he he. Seriously, my main concern before making this project is all about safeties. Thanks for the heads up anyways.