2017 Mazda CX-5

[CocoBoy]

DIYed some for the car.

Poor man's trunk mat:grin (rubber from Ace Hardware-):. Not fancy but serves the purpose.



DIY TPMS (Carchet) - Valve cap type. (Fairly accurate in pressure indication)

[Nelson de Leon]

DIYed some for the car.

Poor man's trunk mat:grin (rubber from Ace Hardware-):. Not fancy but serves the purpose.

Meron deep dish niyan sir na Weathertech brand sa Blade. Though not as deep as those for custom fit, it still serves it's purpose. Pati Maxpider meron din but you have to but both for custom fit.

I also bought the MaxTray and 3D Maxpider deep dish sa US for our CX-5 and medjo harang ang price niya. Pati shipping mahal because of the irregular shape of the packaging. Hindi pa dumating but I might sell it na lang and keep the ones I bought from Blade.

DIY TPMS (Carchet) - Valve cap type. (Fairly accurate in pressure indication)

I have stock nito but it's valve type, not valve cover type. Takot ako it might get easily stolen in public parking areas. Hehe!

Sent from my ASUS_Z012D using Tapatalk

[Nelson de Leon]

Funny thing after my first 1,000 check up the dealer didn't turn on the maintenance schedule program in my unit.

Any of you guys also experienced the same?

Sent from my ASUS_Z012D using Tapatalk

[CocoBoy]

The "dugas" boys will have no use for it unless they buy a receiver or sell these sensors to somebody who can use it. The screw lock keeps the cap from easily being removed, they have to cut the whole valve stem to get it. he he. Bahala na si Batman, he he. I'm just curious if it really works and accurate.

[Nelson de Leon]

The "dugas" boys will have no use for it unless they buy a receiver or sell these sensors to somebody who can use it. The screw lock keeps the cap from easily being removed, they have to cut the whole valve stem to get it. he he. Bahala na si Batman, he he. I'm just curious if it really works and accurate.

Ang catch lang with my valve type, kapag nasira ang valve, yare. It happened to me dati.

Sent from my ASUS_Z012D using Tapatalk

[travajante]

The "dugas" boys will have no use for it unless they buy a receiver or sell these sensors to somebody who can use it. The screw lock keeps the cap from easily being removed, they have to cut the whole valve stem to get it. he he. Bahala na si Batman, he he. I'm just curious if it really works and accurate.

Since the valve is practically open w/ this type, how's the long term seal of these caps?


Sent from my SM-G950F using Tapatalk

[CocoBoy]

Since the valve is practically open w/ this type, how's the long term seal of these caps?


Sent from my SM-G950F using Tapatalk

I inflated the tires to the recommended 33 psi all over since I just drive most of the time by myself. Cold setup, psi rises to around +3-4 psi during long drives. I will try to observe pressure drops with this open type sensors when i replace the inflation gas with nitrogen.

[Nelson de Leon]

I inflated the tires to the recommended 33 psi all over since I just drive most of the time by myself. Cold setup, psi rises to around +3-4 psi during long drives. I will try to observe pressure drops with this open type sensors when i replace the inflation gas with nitrogen.

Are you sure 33psi ang recommended? I read from somewhere or sa manual na 38-40psi.

I've also tried nitrogen but I really see no difference in pressure or temperature.

Sent from my ASUS_Z012D using Tapatalk

[CocoBoy]

This is what i referred to. Nasa driver side yung sticker. It may be different for the 19" rims though sa reco na inflation pressure.

[composite]

Mga sir, mern po kayong kilalang shop or store na may cx-5 accessories like step sill, rain visor, mud huard and trunk tray? [emoji4]


Sent from my iPad using Tapatalk