jason, check mo muna yung mga contacts sa tail light bulbs mo. baka loose lang yan.
djerms, as requested, eto na yung engine ko with the gold cover removed:
how to:
well hold the cover on both sides, then lift it slowly.
![]()
jason, check mo muna yung mga contacts sa tail light bulbs mo. baka loose lang yan.
djerms, as requested, eto na yung engine ko with the gold cover removed:
how to:
well hold the cover on both sides, then lift it slowly.
![]()
ian_rex--- pangit ata tingnan kung tangalin yun cover eh... masyadong bear yun engine... parang borlesk queen... hehehehehe....![]()
cardo, thats just the stock tail light and nilagyan ng reflector lang sa gilid like the revo.. pangit tingnan eh... meron din ganyan ang style but euro, more like the crosswind 2006 tail light black lang ang color....
guys, have you tampered your suspensions already? i have... hehehehe.... para mas maganda ride naman ng dmax ko
Ian,
Actually, I was able to do it na last saturday. Hehe. Hindi ko na ibinalik kasi mas madaling linisin ang makina kung wala yang cover na yan. I plan to have it repainted flat black tapos chaka ko nalang ibabalik ang cover ng engine.
djerms... mag post ka naman ng pics kung sakali ma paint mo na ang cover.
Yup. Tumpak sir cardo.Originally Posted by cardo
Sana lang hindi ginawang patulis yung design saka sana yung round white circle ginawang square or rectangle na continuous dun sa reverse light.
![]()
iv changed my 3rd brake light to a transparent one or white already kaya im looking for a tail ight that would match it...
for me, i don't want to change any of my safety lights (brakes, etc). ok na sa kin ung stock. ayaw ko kasing i-compromise ung safety ko and my passengers..
but JARHEAD,
just a suggestion, even though you replaced it with a transparent one, use a RED BULB. RED light is more visible than yellow light especialy at night. anyway. saan mo nga pala nabili yan and how much and saan gawa? hehe
JARHEAD,
anong modifications nga pala ang ginawa mo sa suspension mo?
2dmax-- naka red bulb naman yun 3rd brake light ko.. gusto ko kc tingnan na naka white yun housing nya... hehehebinaba ko ng konte ang torsion ko sa harapan para mas maganda ang ride and hindi siya matigas or matagtag.... yun support ng leafspring, yun makapal na nasa base talaga, i change it.. binaliktad ko.. hehehehe.. gumanda nga ride but lumiit ang cargo load ko but ok lang sakin kc hindi naman parati kinakargahan ang likod ng dmax ko...
JARHEAD,
how much po and san nakakabili ung 3rd brake light na transparent? san made un?
2dmax-- d2 kc sa cebu ko yun biinili eh.... but iv heard from my frends dyan na marami sa banawe daw... and try mo sa mga accessory shop. iv seen som edmax dyan naka white na yun 3rd brake light nila eh.. galing po kc ako dyan last tuesday...
Hoy Jarhead,
Nanggaling ka pala dito hindi ka manlang nagpainom! Hehe.
sorry mga pre...hehehe..... very busy kc ako pagpunta ko dyan... didnt have time na para ma-abala ko kayo... kakahiya naman....
mga bosing, may nka experience naba sa inyo na nasunog ung motor ng power window nyo. kasi nasunog ung sa akin. 2 yrs n 4 months pa ung dmax ko. grabe. havent experienced these in 5 yrs sa fuego ko. kaka inis....![]()
ouch that hurts.
The only problem I experienced with car power windows, is that it wont come down. Sometimes, natutunaw ata yun rubber linings sa init ng araw hehehe. But no problems so far on our dmax
dlim,
baka na stuck yung power switch or nagmalfunction causing the motor to overheat. Anyway, isolated case siguro. I hope na mura lang ang repairs. Anung window ba? Sana hindi yung 2 front passengers'