Isuzu Dmax Owners [ARCHIVED]

[jarhead]

Thanks for the info . Plano ko talaga is Wurth because sabi nga nila one time application lang and that's it, then annual rustproof nalang. Yun lang nga, may kamahalan talaga .

yeah ganun nga... but its worth the money naman you pay.... sa re-aplication.. you could just ask the casa kung pwede pa retouch lang sa mga natanggal na rustproof... kadlasan sa wheel arc yan and underchassis narin kung parati nagpa hi-pressure washing....

[cardo]

yup a 20x9.5 would fit basically.... 255/45.... maybe s ARB ang makasagot sa tanong na yan tlaga cardo...


ARB??????? paging mr. ARB, ur wanted at the dmax forum... hehehehe....

hi,

thanks for the reply. would you know what is the ideal offset for dmax natin? +45 or +30?

thanks

[Syuryuken]

Patulong naman mga kapatid naghahanap kasi kaibigan ko ng D-MAX budget nya 650k minimum kahit anong year baka may alam kayo. Thanks.

[x_jason_x]

hi,

thanks for the reply. would you know what is the ideal offset for dmax natin? +45 or +30?

thanks

Cardo,

+45 or +30? hmmm ang alam ko +10, +15, or +20 lang ang pwede sa dmax. Pero im not sure. Mukang bibili ka rims a, ano balak mo?

[Memphis Raines]

Patulong naman mga kapatid naghahanap kasi kaibigan ko ng D-MAX budget nya 650k minimum kahit anong year baka may alam kayo. Thanks.

650k Minimum or Maximum?

[2Dmax]

Thanks for the info . Plano ko talaga is Wurth because sabi nga nila one time application lang and that's it, then annual rustproof nalang. Yun lang nga, may kamahalan talaga .

matibay din ang 3M. it's rubberized and is manufactured to withstand wet and dry conditions. hindi basta basta nag-cra2crack because as said it's rubberized. one gallon of 3M contains pure 3m. all you have to do is mix 1 parts of gasoline to 2 parts 3M as directions at the back of the can implies. But Petron stations are using 1:1 ratio. But you can suggest they use 1:2 ratio. One time application din ang 3M compared to WURTH and maybe yearly inspection and re-touching na lang. 3M is only 1/5 the price of Wurth with same level of quality, so san ka pa?

[Djerms]

matibay din ang 3M. it's rubberized and is manufactured to withstand wet and dry conditions. hindi basta basta nag-cra2crack because as said it's rubberized. one gallon of 3M contains pure 3m. all you have to do is mix 1 parts of gasoline to 2 parts 3M as directions at the back of the can implies. But Petron stations are using 1:1 ratio. But you can suggest they use 1:2 ratio. One time application din ang 3M compared to WURTH and maybe yearly inspection and re-touching na lang. 3M is only 1/5 the price of Wurth with same level of quality, so san ka pa?

Yup, contented din ako sa 3m. Used it for 5 years sa L200 ko and all I did was re-touch the scratched areas (usually due to debris).

Sa Trooper ko for 7 years hindi ko pina-undercoat. Kahit yung factory undercoat. Wala naman naging problema. Walang kahit isang rusted area...hehe. Panay pa ang biyahe ko sa bicol region...usually beaches.

[wildthing]

Bossing, merun na ba sa inyo nakapagpalift ng DMax ninyo?

Possible ba na yung rear ay gawin kong spring over differential (like the hilux)?

Yung front which would be better - torsion bar adjustment, body lift (spacers) o merun ng aftermarket suspension lift?

[Syuryuken]

650k Minimum or Maximum?

650k minimum- 720k maximum

[ARB]

check ko mga tire size ng customers namin. I think the mags na 9.5x20 will fit its the tire size that will have to be considered.

3M undercoating is good, if you use it inside, under the vehicle. but not recommended for the bed of the pick-up. carrying petroleum products will melt it. I suggest that before you apply undercoating, have the underside cleaned as in very clean. any dirt trapped once painted will be the one that will start the rust build up. also pag pa spray sa mga gas station, you have to let it dry at least a day minimum or else some debris will stick to it and pangit tignan. why dont you have it body colored na lang, parang car show look, if you have time a local shop here does it but it takes weeks to complete.