Isuzu Dmax Owners [ARCHIVED]

[jarhead]

magkano ba ngayon ang magpa-adjust ng valve clearances sa CASA?

dont know kung ano rate nila sa mga casa dyan sa manila.... around 200+ guro

[jarhead]

PhP 7,000.00?! ang mahal naman. pati valve clearance yun? 40,000 Kms. pa dapat i-check yun a.

(i could be wrong though)

ok narin yan 7k ah.... thats usually the price rin namin d2 kung 20k PMS....kasama na dun ang labor, oils, brake cleaning, coolants, tune up, repack ng bearing,etc etc....

[jarhead]

sa valve clearance lang kasi ko interesado sa CASA. my mekaniko sa amin 150-200 php lang ang singil kaso parang wala pa ko tiwala kasi nasa warranty pa ung DMAX, baka may mangyaring masama ma-void pa ung warranty..

dapat din marunong or alam niya pano iset ang timing para makuha or magawa niiyang i.adjust ang clearance.. simple tools nga lang ang needed but the work or process ay mejo matagal and mejo mahirap din.... dapat meron know how talaga ang technician and hinid lang basta2x.. baka hindi maset ang timing niya.. kaya make sure lang talaga kung kaya ba tlaga niya mag tune up ng ride niyo....

[Djerms]

basta if your Dmax is still under warranty. Bring it to your suking Casa nalang. Mura lang pala ang labor as per Jarhead, 200 lang. ok na yan.

Jarhead,
Yung 7k, labor lang yun. Wala pang parts. Parts costs as much as another 5k. Hehe

[jarhead]

basta if your Dmax is still under warranty. Bring it to your suking Casa nalang. Mura lang pala ang labor as per Jarhead, 200 lang. ok na yan.

Jarhead,
Yung 7k, labor lang yun. Wala pang parts. Parts costs as much as another 5k. Hehe

ganun.. grabe naman yun.... 7k na labor. parang body repair na yan ah.... that is too much for alabor cost.. sa amin nga patterned after the cebu casa nasa 2k lang... grabe naman magcharge ang casa na yan/.... san ba yan djerms? anong casa?

[Djerms]

Jarhead,

2k yung PMS alone (PhP2,200.00 to be exact) pero may iba pa kasi like tire rotation and rusproofing. Not to mention na may Vat pa yan on top of the whole amount.

Teka yung 7k pala less 1.5k yun kasi yung copy nung job list may repainting na ginawa.

Isuzu Pasig ito. Sa inyo ba may re-application pa ng rustproofing (I mean kailangan ba talaga ito?) Yung VAT umabot pa ng PhP700 petot. hehe.

Tapos nga pala sa labor list may workshop materials na naka-indicate...whats up with this kaya? May labor sa pagkuha ng workshop materials sa bodega? hehe.

Nga pala bro, anong oil ang gamit ninyo diyan for the pms? Rimula x ba?

[cardo]

I had a "re-application" of the rust proof aslo, when I had my last PMS. it was this year around May. The 1st rust proof I had was when I got the Unit in Jan 05.

[2Dmax]

sa SAVI rustproofing na lang kayo magpa-rustproof. dun kasi ko nagpa-RHINO LINING plus rustproofing and 12k inabot lahat2x. tapos every year ang re-application ng rustproofing for 2k php. their rustproofing process includes inside area of the hood, doors, panels, tailgate, bumbers and of course ung under chassis application.. If rustproofing alone, it will cost 2k php..

[Djerms]

Hmmm...oo nga. importante nga yang rustproofing. I might have it scheduled sa casa.

[jarhead]

Jarhead,

2k yung PMS alone (PhP2,200.00 to be exact) pero may iba pa kasi like tire rotation and rusproofing. Not to mention na may Vat pa yan on top of the whole amount.

Teka yung 7k pala less 1.5k yun kasi yung copy nung job list may repainting na ginawa.

Isuzu Pasig ito. Sa inyo ba may re-application pa ng rustproofing (I mean kailangan ba talaga ito?) Yung VAT umabot pa ng PhP700 petot. hehe.

Tapos nga pala sa labor list may workshop materials na naka-indicate...whats up with this kaya? May labor sa pagkuha ng workshop materials sa bodega? hehe.

Nga pala bro, anong oil ang gamit ninyo diyan for the pms? Rimula x ba?

ganun ba... but meron repainting? pinarepaint mo ba? hindi naman necesary i.tire rotate or rust proofing..... yearly ata yan but not necessary carry over sa PMS na ride mo... yup meron kami re aplication sa rustproofing but on request sa owner ng ride... hindi ko lang alam kung ano yan workshop materials bro, baka rake cleaner,rags.....

wer using petron lang... yun iba na casa is using caltex, iba naman shell, iba gulf,etc... dpended na yan sa casa kc meron tie up sila nyan... anyway, it woudlnt matter whar brand of oil you rare using as long as 15w40 and multigrade oil... and meron maganda na API grade. sa petron kc CI-4 na sila... misan we use mobil with the same grade by request sa owner na well nown brand talaga ilagay....