dvldoc

Hi dvldoc. I need some help here. I would want to run a filter relocation modification BUT the housing for the filter is small. Current or correct filter being used is a bd7160 but gasket diameter for the filter relocation would be able to fit a B2 diameter. Here is the data on the two filters.

B2:
Contains: Anti-Drainback Valve
8 PSID Front End By-Pass Valve
Descriptions: Dual-Flow Lube Spin-on

BD7160:
Descriptions: Dual-Flow Lube Spin-on
Contains: 11-17 PSID By-Pass Valve


I can't remember if I can run a higher or lower psid filter.
Thanks in advance for your help!