need help for cobra alarm system

**questj72** · April 27th, 2009 12:17 AM

Originally Posted by bjxx

Guys, if you still have this problem on your Cobra alarm, try this... Disarm the alarm (simply unlock using the remote) then open the door. While door is open, press the lock and silent buttons at the same time. This should solve the problem.

thanks sir! it worked for me.

**zm9rdqbzq3** · June 3rd, 2009 04:51 PM

Originally Posted by bjxx

Guys, if you still have this problem on your Cobra alarm, try this... Disarm the alarm (simply unlock using the remote) then open the door. While door is open, press the lock and silent buttons at the same time. This should solve the problem.

temporary it solved. but once the ignition was turned on and off. it beeps again.

**garygallardo16** · August 24th, 2016 06:35 AM

Originally Posted by bjxx

Guys, if you still have this problem on your Cobra alarm, try this... Disarm the alarm (simply unlock using the remote) then open the door. While door is open, press the lock and silent buttons at the same time. This should solve the problem.

Thank you. This worked for me.

**ginagoome** · January 19th, 2017 11:47 AM

Originally Posted by zm9rdqbzq3

I am currently using "cobra alarm system" and I was badly in need for some advice on how to disable the beep sound each time I open the door of my car.

usually, it continuously beeping for around 10 seconds yata.
Medyo anoying na eh... di ko naman makita sa manual kung paano ma disable iyon.

thanks po!

update..
I would highly recommend the Goome tracker. It is very easy to use, as a matter of fact it plugs right in to the vehicles diagnostic port and it can be hidden under the dash further with an OBDII splitter cable! The software takes user right to the vehicles exact location when I log in and I can see where the vehicle has been by clicking on a calendar.
btw i can post a 90% discount code for GM06NW GPS tracker on Amazon just for $1 to buy, if anyone want to.