HID Projector Retrofits by garyq

**airborn65** · January 30th, 2012 08:46 PM

* gary, bro thanks for retrofitting my starex ganda nga ng output gaya ng sabi mo mas uniform ang light distribution ng FXR v 4.0 and wide din ang distribution halos 2 lanes ang naiilawan as per the output below :

low beam

high beam

Originally Posted by garyq

My retrofits will have, basically the same output as cars coming with oem hid projectors like the CRV 4x4, Subaru Legacy, etc so hindi ka talaga huhulihin pera na lang kung mag counterflow ka, haha. In more than 2 years of using my retrofit, not once na nahuli ako. Ayaw din naman natin maka abala sa ibang motorista, safety pinaguusapan dito.

hiro: thanks for your explanation. Mga late next week pa tayo coz Tuesday lang dating nung parts

renzo: gawin na natin retrofit mo, tagal na yan

Got a hold of the new FXR, version 4.0 na. Finally straight na yung cutoff coming off the box and much uniform light distribution. Eto on a Starex 2001 model, stage3 oem running on 50w, smoked new headlamps, with angel eyes

**renzo_d10** · January 30th, 2012 09:23 PM

^ As seen, maliwanag pa ang paligid. You will really enjoy how the projectors work where there are no lights around at all.

But, very nice projectors ! And a very practical vehicle to put it into, too.

**cjv_justice** · January 31st, 2012 02:37 PM

naluluha ako sa inggit...

**X-salta** · January 31st, 2012 02:59 PM

Originally Posted by j4ever

Did some work on the fogs to make it look sleeker...

Gusto ko po nito sir, ang ganda ng DRL na gawa nyo, paki PM naman po ako SIR GARY kung magkano po ito. Kung meron pong mas malakas mas maganda. Hehehe! Thank you po sir!

**shermanWTC** · January 31st, 2012 09:10 PM

Hope someone can post pics also on asphalt pavement. I had my altis installed with a plug and play HIDs (H/L and fog). Basically sobrang liwanag na sya sa semento but deteriorated on asphalt esp pag umuulan. So I'd like to see how HID performs in a projector in an asphalt. BTW 6000K gamit ko and I read it loses 30% of lighting output compared to 4300K.

Hi Gary, meron na bang nag painstall for Cruze? I'm planning to have one...

**garyq** · February 1st, 2012 07:32 AM

sherman: there's science involved when it comes to automotive lighting kaya we can be objective naman.

4300k will produce 3200 lumens, for the Philips 85122+
6000k will produce 30% less, at the least

Tapos plug and play ka pa so meaning the total output of the bulb is not projected on the road. Kaya meron glare yan kasi light is going everywhere. The more white yung light, the lesser lumens output and also contrast ratio mas mababa, i.e mas mahirap ma discern ng eyes mo yung shades of light.

So whether on asphalt or cement road the above facts hold true.

A proper retrofit on headlights and fogs will outperform, by a mile any plug and play hid setup.

Cruze...kaya

**X-salta** · February 2nd, 2012 09:34 AM

Originally Posted by X-salta

Gusto ko po nito sir, ang ganda ng DRL na gawa nyo, paki PM naman po ako SIR GARY kung magkano po ito. Kung meron pong mas malakas mas maganda. Hehehe! Thank you po sir!

up ko lang po ito sir... Thank you po

**garyq** · February 2nd, 2012 11:20 PM

xsalta: pm kita bro

**X-salta** · February 3rd, 2012 11:04 AM

Thank you po sir gary. Wait ko po PM nyo.

Originally Posted by garyq

xsalta: pm kita bro

**peejay_07** · February 4th, 2012 03:53 PM

Bro, post #1067 page 107. Video na ni post ni albee. umuulan pa dun...HTH

Originally Posted by shermanWTC

Hope someone can post pics also on asphalt pavement. I had my altis installed with a plug and play HIDs (H/L and fog). Basically sobrang liwanag na sya sa semento but deteriorated on asphalt esp pag umuulan. So I'd like to see how HID performs in a projector in an asphalt. BTW 6000K gamit ko and I read it loses 30% of lighting output compared to 4300K.

Hi Gary, meron na bang nag painstall for Cruze? I'm planning to have one...