Detailing Thread [For Newbies][continued 2]

[Hardinero]

darker

ang ganda ah...madam how much aabutin kung pa-trabaho kung sa inyo yung tsikot ko....

balak ko mga mga 3rd week of december bilang pamasko ko sa beloved ride ko..

[dbhollanda]

ang ganda ah...madam how much aabutin kung pa-trabaho kung sa inyo yung tsikot ko....

balak ko mga mga 3rd week of december bilang pamasko ko sa beloved ride ko..

same here...magkano kaya abutin pag santa fe...

[bombitmd]

WOW! Parang ang layo nung gawa ko dun sa hood sa gawa niyo :P Iba na talaga pag mga master gumagawa :D

As for me, just finished 8 hours straight (may snack break naman) detailing my car. Grabe and sakit ng katawan ko!

My regimen:
wash
remove tar

per panel:
wax
Meserna Intensive Polish (PC)
Meserna Final Polish (PC)
Wolfgang Deep Gloss Paint Sealant (hand applied then PC buff)
tomorrow morning: second layer sealant
tomorrow night: 915

Ang sarap talaga mag detailing with the PC! Tanggal yung mga swirls and scratches, sa wakas! Tomorrow I will post some pics. Got to get some rest...

[Big_daddy]

Wolfgang Deep Gloss Paint Sealant 3.0
Finish Kare 218 Poly Wipe Sealant Conditioner
Finish Kare 1000 Hi-Temp Paste Wax
Griot's Garage Paint Sealant
3M Perfect-It Show Car Liquid Wax
3M Performance Finish
Meguiar's M21 Synthetic Sealant
NXT Tech Wax - Liquid or Paste
Liquid Glass Auto Polish
Poorboy's World Ex-P Pure Sealant
DP Poli-Coat Paint Sealant
Duragloss Clear Coat Polish #111
Four Star Ultimate Paint Protection Boosted with Polycharger

Hope this helps.

Thanks for the reply, will try to look for any of these items. In the meantime, I'll probably use up my FX Synwax as a sort of sealant until I get my KSG.

[frenchtower]

After several sleepless nights of wondering if I need a rotary polisher, I succumb to a sinfull indiscretion. I pre-ordered a FLEX PE14-2-150 and hoping to be one of those who is in the first 50. Can't wait to have my hands on this baby!!

SN 00001 goes to Max (Owner of PBMA), 00002 goes to Mike Phillips, 00003 will be given to Pres. Obama, 00004 to the VP, 00005 to NASA, the rest is for everybody else.

[indiej]

Guys, eto yung pic using the manual pressure sprayer.
Yung car shampoo ko is Mother's California Gold.
Di ko masyadong napafoam kasi onting shampoo lang nilagay ko(tipid kasi paubos na, hehehe)

parang pwede na. i'll buy one next sale. i don't know if it's this or the aceH model that has another hole for pressure release.

1:6 microtex shampoo and water on a foam cannon at max gives 5mm/sec max. runoff on a vertical surface. it does foam/paint it white though. the runoff slows down to a halt and lastly it looks like the above pic.

[indiej]

Had to detail an old classic car of my BF's friends aunt

its an Infinity Limo Type sedan

Paint has very little water marks none that were as tough as the civic we detailed but the paint was infested with very deep swirl marks

the condition was deep enough that it required 2 passes of compounds 1 pass polish and 1 pass finishing polish for this

..After

are those remaining swirls too deep? were the door guards polished afterwards? great job, moreso because it was done throughout the night. how did you get into that predicament? don't forget to take your vitamins.

[indiej]

Washed with Meg's Ultimate Wash & Wax, then waxed with Collinite 915 by hand.

great job.

p.s. don't forget to get a milder polish like SwirlX on your next rotary session. UC is quite at the far end of the abrasive line.

[bombitmd]

(Wala ba talagang delete message? Edited this message)

[bombitmd]

My regimen:
wash
remove tar

per panel:
CLAY pala
Meserna Intensive Polish (PC)
Meserna Final Polish (PC)
Wolfgang Deep Gloss Paint Sealant (hand applied then PC buff)
tomorrow morning: second layer sealant
tomorrow night: 915

Oh no! Need to wait 30-45 minutes pala before buffing off the WG DGPS! Crap. Oh well, one more pass after lunch. (My wife will probably learn how to use the porter cable very soon -- on my face!!! )