Detailing Thread [For Newbies][continued 2]

[PSI]

Guys, I won't be able to join you this sunday (POLISHING)...... for NEWBIES I STRONGLY SUGGEST you join the one in katipunan....

*ChiX.... thanks for the MAP

[Big_daddy]

I'm about to get my 476 and Klasse AIO c/o my Auntie.

Here's my plan once I receive them and a claybar set (Mother's)

1. Carwash
2. Claybar
3. Klasse AIO (to polish the paint)
4. 476 as the LSP

My ride is a 2010 Adventure (Black) that was acquired March 2010, so far there are only minor/minimal swirls on the paint, mostly on the roof and hood.

I was planning to do some polishing as well, maybe use either Swirl-X or Mother's Step 1/2..but I think that Klasse would be enough.

What do you guys/gals think? Any suggestions?

[dbhollanda]

I'm about to get my 476 and Klasse AIO c/o my Auntie.

Here's my plan once I receive them and a claybar set (Mother's)

1. Carwash
2. Claybar
3. Klasse AIO (to polish the paint)
4. 476 as the LSP

My ride is a 2010 Adventure (Black) that was acquired March 2010, so far there are only minor/minimal swirls on the paint, mostly on the roof and hood.

I was planning to do some polishing as well, maybe use either Swirl-X or Mother's Step 1/2..but I think that Klasse would be enough.

What do you guys/gals think? Any suggestions?

i suggest another carwash after the claybar. then better get the klasse sealant and apply that after aio then 476 on top of the sealant...

[Big_daddy]

Yep, you're right, I forgot the wash after the clay bar...and unfortunately, I only have the Klasse AIO, what I do have is FX Synwax...will that work as a sealant?

1. Carwash
2. Claybar
3. Carwash
4. Klasse AIO (to polish the paint)
5. FX Synwax
6. 476 as the LSP

How about this?

[Ginnova]

better if you use KSG after KAIO. No need to put FX. 476 will be more than enough

[mau2485]

Question, Is it ok to use Megs Ultimate compound in replacement on Mothers step 1? i've noticed that Moms step 1 is more abrasive than megs UC. Together with that Megs UC gives the shine and cure for some defects. Followed by any wax as step 3. I think it is ok not to use step 2 since the shine coming from the Megs UC is enogh and using step 2 will no loger do dramatic effect on the paint. Like Megs UC the NXT 2.0 every week?

Any advice?

[kafph2000]

Megs UC is definitely more abrasive than mother's step 1. Using it weekly will badly affect your clearcoat, as our gurus say.

[Hardinero]

Guys, I won't be able to join you this sunday (POLISHING)...... for NEWBIES I STRONGLY SUGGEST you join the one in katipunan....

*ChiX.... thanks for the MAP

paps, san and when yung sa katipunan? mas ok sakin katipunan since malapit lang....

saka kelangan ko na rin maka-iskor ng epektus kasi paubos na...

[x_jason_x]

Guys, what kind of product do u suggest I use in removing grime and dirts in wheel wheels? May available ba na spray on product na effective in removing it? Kung normal shampoo lang kasi, parang medyo mahirap tanggalin.

[jeDi13]

would just like to thank sirs frenchtower, watusi, hammerdin, and indiej for the suggestions. used cleaner wax palang naman, pero nawala talga yung libag! matutuwa si erpats nito. thanks ulit mga sir!
:clap: