Tsikot.ph PHUV Prototype

[OyiL]

[OyiL]

showcasing the cad capability of the design team

take note: the realistic tire model

[jpdm]

showcasing the cad capability of the design team

take note: the realistic tire model

P-U-W-E-D-E !!!!!

Puede yan sir Oyil! doable yan!kung ako lang may pera yan papagawa kong PHUV version for tsikot.Submit mo yan sir MVPMAP!!

[kihtmaine]

Oyil you design that?
Sa autocad mo ginamit?

ganda!!

Anyone can post their design right?

[dprox]

... Anyone can post their design right?

Right, kihtmaine.
Anyone can post designs, but try to choose the right thread for posting.
If your sketch doesn't fit any of the categories, post it in the Concept Car thread.
And make sure you mark your sketches for proper identification and attribution.
[SIZE="1"]
Kung mahilig ka talaga magdrowing pero hindi ka pa masyadong magaling, pwede mo ring i-post sa Tsikot Kids Car Art Gallery :hysterical: >Joke<[/SIZE]

If you want to learn how to draw in 3D, this forum has a free course in 3DSMax that is about to begin.
PM drey for details.

[kihtmaine]

Right, kihtmaine.
Anyone can post designs, but try to choose the right thread for posting.
If your sketch doesn't fit any of the categories, post it in the Concept Car thread.
And make sure you mark your sketches for proper identification and attribution.
[SIZE="1"]
Kung mahilig ka talaga magdrowing pero hindi ka pa masyadong magaling, pwede mo ring i-post sa Tsikot Kids Car Art Gallery :hysterical: >Joke<[/SIZE]

If you want to learn how to draw in 3D, this forum has a free course in 3DSMax that is about to begin.
PM drey for details.

Weheheheh sure no problem.

[OyiL]

Oyil you design that?

opo

Sa autocad mo ginamit?

cad. pero hind adobe autocad. sketchup at kerkythea.

ganda!!

sa unang tingin. pero maganda talaga yung render ng lighting. pati ako bumiilib sa quality ng free software.

[jpdm]

Sir Oyil,

kaya yan ng Cavite fabricators yan!!!

[safeorigin]

ang tanong, kayanin kaya nila ung ibang designs ni kumpareng oyil? lalo na yung "project berzerk".

[kihtmaine]

Thanks

Oyil thanks for the tip.

Here's my design PHUV also can be a passenger type jeep.
Like the patok inspired designs (byaheng cubao, marikina, and rizal).
Hope you like it



Since ang daming namang subic na sasakyan yung gulong nila pwedeng pakinabangan.

Also going green.
- Biodiesel compliant : Jatropha and Coconut based
- The motor oil (lubricants) must be from castor oil plants.
- Led based tailights.
- The engine controlled by a computer, software is open source so it can be tweaked.
- Spacious interior,
- Big legroom.

well eto muna.

[OyiL]

i havent seen the "patok" jeep. anyone got pictures?

[donbuggy]

Thanks

Oyil thanks for the tip.

Here's my design PHUV also can be a passenger type jeep.
Like the patok inspired designs (byaheng cubao, marikina, and rizal).
Hope you like it



Since ang daming namang subic na sasakyan yung gulong nila pwedeng pakinabangan.

Also going green.
- Biodiesel compliant : Jatropha and Coconut based
- The motor oil (lubricants) must be from castor oil plants.
- Led based tailights.
- The engine controlled by a computer, software is open source so it can be tweaked.
- Spacious interior,
- Big legroom.

well eto muna.

Nice grille - visually reminiscent of a jeepney's. A little bit more development of the rest of the body and this vehicle can be a contender for the Tsikot PhUV (to take on the Tableta and Oyil's creations).

[safeorigin]

jpdm,
i assure you, you haven't seen the best of oyil yet. there is more to him than meets the eye. just sit back, read dyaryo and drink kape. u might get shock after a few months.

[OyiL]

jpdm,
i assure you, you haven't seen the best of oyil yet. there is more to him than meets the eye. just sit back, read dyaryo and drink kape. u might get shock after a few months.

parang transformers! more than meets the eye

[Flagg]

Sir oyil, ito yung the best! Slab-sided & very aesthetically pleasing.

Mukha syang Scout II.

[Flagg]

Tama si sir donbuggy... kaya boto ako dito.

Sir ehnriko's 7G ok sana, pero feeling ko medyo kamahalan ang pag-manufacture ng front end, lalo na yung malaking curved glass area...

[milo-ph]

update ko lang uli...eto isa pang version ng PhUV design ko. sakto sa body na ito ladder frame chassis, wala masyadong kurba yung body saka yung mga salamin. Rear drive na naka live rear axle with semi elliptical leaf spring suspension. Front suspension pwedeng torsion beam or double wishbone independent suspension. 2.5 na Foton sourced or 4D56 Mitsubishi diesel engine makina. Thanks for looking again!

[OyiL]

milo! andami pala niyan.

[ehnriko]

Para ganahan yung iba...

Here's a concept I made last night... I'll let everyone for sneak peak.

It's a City Utility Vehicle... a.k.a. C-Ute or CUTE!

It aims to bring a feeling of being inside a big bus for the 5 passengers... the rear section is just a box... with enough payload capacity to accomodate typical cargo items.

There is only one curved glass in this vehicle... the side glasses are flat.

[Flagg]

Ganda bosing! Parang S-Cargo na pinaghalo sa Renault Trafic (my favorite van):