Crosswind a/t slipping

[crosswind]

Bring it to the dealer hindi ba shift cable ang problem sa crosswind mo. My xuv a/t's shift cable was repaired bago naputol by isuzu makati at 90k kms mark.

Sent from my SM-A700FD using Tsikot Forums mobile app

[lowslowbenz]

instead of peace of mind, what I got is a head wracking pressure. I got my transmission rebuild by a neighbor mechanic. I bought the rebuild kit in walco banawe. he's a good mechanic but seems to have done worst for the transmission. ang kupad ng acceleration pagkatapos ng rebuild. walang arangkada sa paahon. bayad utang kasi ang labor niya, pinatulan ko nalang para quits na sana. parang nalugi pa tuloy ako nito. any possibilities po kung anong nangyari? ayaw ko na rin siya ka usapin, patingnan ko nalang siguro sa iba.

Sent from my SM-G610Y using Tapatalk

Read this just now, there are good mechanics, and there are GOOD transmission mechanics.

Not all mechanics are created equal, each has his own weak and strong areas of specialization. If a mechanic tells you he knows (or is an expert) of everything, he's lying thru the skin of his teeth.

I hope your car is now doing fine.

[Carla paj]

mine is 2007 crosswind xuv a/t... tranny seems to be slipping, medyo mataas na ang rpm, mabagal pa ang takbo.. ang ginawa ko, nagpadialysis atf change hoping mag improve ang takbo.. nakaubos ng 18 liters ng atf at im sure malinis na ang nasa loob at marumi din talaga ang nailabas, parang kulay putik na.. ito ngayon, lumala pa ang takbo after dialysis.. halos di ko na maiuwi sa bahay dahil hirap na pag paahon... sliding talaga.. sa flat roads, makatakbo pa... any suggestions mga sir? sakit na ulo ko dito... magkano kaya rebuilt ng tranny ng crosswind? may surplus kaya pang crosswind?

Sent from my SM-G610Y using Tapatalk

Rebuild is around 30k, parts and labor, I have a good trusted mechanic and shop that does it.

[nofalter]

instead of peace of mind, what I got is a head wracking pressure. I got my transmission rebuild by a neighbor mechanic. I bought the rebuild kit in walco banawe. he's a good mechanic but seems to have done worst for the transmission. ang kupad ng acceleration pagkatapos ng rebuild. walang arangkada sa paahon. bayad utang kasi ang labor niya, pinatulan ko nalang para quits na sana. parang nalugi pa tuloy ako nito. any possibilities po kung anong nangyari? ayaw ko na rin siya ka usapin, patingnan ko nalang siguro sa iba.

Sent from my SM-G610Y using Tapatalk

kung Okay na ang shifting after rebuild, it might be the EGR valve or MAF sensor baka sobra dumi na kaya walang arangkada.

[benchph1]

May mga specialists talaga pagdating sa tranny overhaul/repair. He might have “botched” your tranny sir. Meaning he did not do the overhaul properly.

You can see if he has used the correct AT Fluid. That can also lead to the symptoms you are describing.


Sent from my iPhone using Tapatalk

[GhostSpell]

First time A/T user here. I am currently driving a Crosswind XUVi. Kapag medyo malamig pa ang makina 'di agad kumakagat ang clutch but once it's on the normal temperature, it seems fine. Overhaul na rin ba ito o palit lang ng ATF?

[RavenBlack]

Try muna palit ATF.

Sent from my ONEPLUS A3003 using Tapatalk

[StockEngine]

First time A/T user here. I am currently driving a Crosswind XUVi. Kapag medyo malamig pa ang makina 'di agad kumakagat ang clutch but once it's on the normal temperature, it seems fine. Overhaul na rin ba ito o palit lang ng ATF?

every 2years ang at fluid change.. hindi pa ba napapalitan?

Sent from my SM-G935F using Tapatalk

[GhostSpell]

Try muna palit ATF.

Sent from my ONEPLUS A3003 using Tapatalk

Thank you, Sir!

every 2years ang at fluid change.. hindi pa ba napapalitan?

Sent from my SM-G935F using Tapatalk

I just got it used last Saturday so I have no idea.

[StockEngine]

Thank you, Sir!



I just got it used last Saturday so I have no idea.

ouch bro! sana pink pa ang atf.. otherwise fluid nga..

Sent from my SM-G935F using Tapatalk