New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 8 of 8 FirstFirst ... 45678
Results 71 to 79 of 79
  1. Join Date
    May 2009
    Posts
    1,990
    #71
    di naman kaya baliktad yung clutch disc?

    experienced this kind of error pero buti traktorang pambukid ang ginawa ko kaya mas madali dali ang r & r. never had the same error again.

  2. Join Date
    Oct 2011
    Posts
    293
    #72
    2013 Fort may hissing sound parang trap air everytime I press and release the clutch. Pero kapag mabilis na takbo like 2nd gear to 3rd gear, 3rd gear to 4th gear, minimal na yung hissing sound if I press/release the clutch. Ito ba yung release bearing problem?

    Nabasa ko rin dito sa tsikot before na if papalitan, isang buo na palitan including pressure plate, pilot bearing etc. Pero if hindi pa palitin tong mga to and release bearing lang ang may wear, puwede kayang hayaan muna hanggang magkaron na rin ng wear and tear yung ibang parts para mas sulit ang palit?

    Or eat the cost and palitan na rin lahat including pressure plate and pilot bearing kahit release bearing lang talaga ang may problema?

  3. Join Date
    Mar 2008
    Posts
    52,521
    #73
    magkano release bearing?
    magkano pressure plate assembly?
    magkano labor?

    make your choice.

    may mga kilala ako, when the trans is opened for whatever reason, and the release bearing "isn't new anymore", they replace the release bearing.
    Last edited by dr. d; September 5th, 2018 at 10:45 AM.

  4. Join Date
    Oct 2018
    Posts
    8
    #74
    Could someone give me an idea how much will it cost for a change of flywheel and clutch assembly (oem & replacement) for new generation everest ambiente and fortuner (2016 above) manual transmissions? #newbiehere

  5. Join Date
    Jan 2013
    Posts
    178
    #75
    Quote Originally Posted by monero View Post
    Could someone give me an idea how much will it cost for a change of flywheel and clutch assembly (oem & replacement) for new generation everest ambiente and fortuner (2016 above) manual transmissions? #newbiehere
    Usually ang labor cost sa labas is 2500. normal cars average ay 10k to 13k oem na yung assembly. Pero siguro mas mahal yan.

    Ang aga naman bumigay nyan sir?

  6. Join Date
    Jan 2008
    Posts
    4,726
    #76
    Quote Originally Posted by monero View Post
    Could someone give me an idea how much will it cost for a change of flywheel and clutch assembly (oem & replacement) for new generation everest ambiente and fortuner (2016 above) manual transmissions? #newbiehere
    Why replace? One advantage of manual trans is their long life compared to automatics.. some manual trans can last a lifetime if properly used

    Usually the pressure plate is replaced and not the flywheel

  7. Join Date
    Nov 2012
    Posts
    84
    #77
    2016 model ang bilis nga magpalit niyan. Baka under warranty pa yan 3 years pa lang. Go to casa muna.

    Sent from my LDN-LX2 using Tapatalk

  8. Join Date
    Jun 2005
    Posts
    3,762
    #78
    Quote Originally Posted by rusty_ryan View Post
    2016 model ang bilis nga magpalit niyan. Baka under warranty pa yan 3 years pa lang. Go to casa muna.

    Sent from my LDN-LX2 using Tapatalk
    Possible clutch driver..clutch components are wear and tear items not covered by warranty

    Sent from my MI MAX 2 using Tapatalk

  9. Join Date
    Apr 2016
    Posts
    118
    #79
    Up on this thread!

    Tanong ko lang po how much clutch disc, pressure plate, and release bearing for Toyota Corolla big body Gli 4A-FE engine? And how many oil/axle seals does it have? May leak kasi around sa may tranny area, and feel ko need ibaba yung tranny, so might as well replace all para tipid sa labor. Thanks sa makakasagot :D

Page 8 of 8 FirstFirst ... 45678
Clutch Replacement