New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 12 of 42 FirstFirst ... 2891011121314151622 ... LastLast
Results 221 to 240 of 828
  1. Join Date
    Jun 2003
    Posts
    143
    #221
    Still using the good ol AMD for my Adobe,Corel and Autocad/Max apps still a better procs in 3d vs Intel.or wala lang akong pambile hehe..

  2. Join Date
    Jun 2003
    Posts
    143
    #222
    i just finished checking up on it and found that Pentium-M has twice the L2(1 mb) than pentium 4-M(512kb). so yeah, it is a new processor...hehe, kaya pala medyo confusing me pentium-M tapos me pentium 4-M.
    pero yung centrino is the over-all "term", errr, right?

    maybe this could help clear things out:

    http://forums.hardwarezone.com/showt...1&pagenumber=1

  3. Join Date
    Jan 1970
    Posts
    305
    #223
    :hi:

    May ginamit akong diagnostic program at lumabas dun na 48 C ang processor temp. at 52 C naman ang board temp. ko kapag idle ang computer. Hindi ba abnormal ang mga values na nakuha ko...? Kapag naglalaro naman ng games, 70 C!!! ang processor temp. at hindi ko pa nacheck yung board temp. kasi sigurado mas mataas yun...

    Ang sabi sakin ng technician, hindi raw mapagkakatiwalaan ang mga diagnostic software na freeware kaya sa malamang, mali yung values na nakuha ko... Sinabi din niya na mataas ang 70 C kaya kapag umabot na sa temp. na ito, ipahinga ko raw yung computer. Kapag nag-75 C na, saka niya ichecheck kasi critical na raw iyon.

    Ang sabi sakin sa isang computer forum, kapag araw-araw akong naglaro at 70 C palagi, saglit lang sira ang computer. Ano kaya ang magandang gawin...?

    Suggestions naman diyan...

    :thanx:

  4. Join Date
    Oct 2002
    Posts
    1,084
    #224
    IF you dont trust the software you have, try checking the temp sa BIOS. Usually meron rin dito utility to check CPU temp., voltage etc.

  5. Join Date
    Oct 2002
    Posts
    4,614
    #225
    krscla,

    you'll have to upgrade your cooling systems. get a large, high-quality CPU heat sink/fan (a high-end GlobalWin, for instance). mura lang to, about 1000+ at most.

    next, improve the air circulation in your case (especially if its closed) by adding an intake fan at the bottom front, an exhaust fan below the power supply if the case can accomodate it. also, organize the cables and wires in the case (tie them together) so they don't block the airflow. finally, you may want to upgrade to a high-quality power supply with two fans (a good idea anyway, whether you're having heat problems or not)

  6. Join Date
    Oct 2002
    Posts
    10,603
    #226
    Guys, i dont want to play the devil's advocate ha, but isnt it that the temperature in the bios is the startup temp?

    Hindi naman iinit ang CPU ng todo kung wala pa itong load right?

    Besides, i think those maintenance programs reference the bios when getting temp.

  7. Join Date
    Oct 2002
    Posts
    1,084
    #227
    you could use your comp then restart n enter the BIOS to see the real temp.

  8. Join Date
    Oct 2002
    Posts
    10,603
    #228
    Oo nga ano :D

    Accurate kaya yung mga LED temperature readouts? Aliw eh. :D

    Some new casings na nakita ko meron ganito. Go kaya ito or show?

  9. Join Date
    Oct 2002
    Posts
    3,144
    #229
    last sat., bought and assembled a pc, eto yong mga notables:

    1. Harmann/Kardon Soundsticks - sa apple showroom 13t, ikot pa sa carpark at nakuha ko sa 8,700 though next day ko pa nakuha. Then sa Manilla Bulletin technews section, 9,700 daw retail. USB ang interface nito.

    2. Compaq FP5315 15" lcd - 17,000. 3 days na akong pabalik balik sa villman about mag lcd. Eto ang napagbalingan ko.

    3. From the same store sa #1, bought 128Mb Excalibur radeon 9200 for 3,800. Next day rin ang delivery. Ewan ko lang kung iba ang performance ng Sapphire, same radeon pero ito ay 5,400 naman.

  10. Join Date
    Oct 2002
    Posts
    11,352
    #230
    ano yung katumbas ng excalibur radeon 9200 sa inno3d gf4?

  11. Join Date
    Oct 2002
    Posts
    10,603
    #231
    Excalibur is made by HIS....

    There are many flavors of Radeon. Mine is a 9600Pro.

    9700pro, 9700 non pro, 9500 pro have already been phased out.

    Got this from tipidpc.com
    ***********************************************
    Ultimate 9800pro 256mb (order basis, 2-4weeks)= 32,350

    9800pro 256mb (order basis; 3-4weeks) = 30,000

    Ultimate 9800pro 128mb (iorder basis; 2-4weeks)= 25,700

    9800pro 128mb (order basis; on stock) = 23,250

    9800 non pro 128mb (order basis; 2-4weeks) = 16,600

    Ultimate 9600pro 128mb (iorder basis; 2-4weeks) = 11,300

    9600pro 128mb (on stock) = 9,700

    9600 non pro 256mb (on stock) = 7,750

    9600 non pro 128mb (order basis; 2-4weeks) = 7,000

    9500 non pro 128mb (order basis; available) = 8,700

    9200 128mb (on stock) = 4,900

    9200se 64mb ((order basis; 2-4weeks) = 3,000

    9100 64mb (on stock)= 3,400
    ************************************************** *
    Yung Sapphire, sila yung gumagawa ng Reference boards ng ATi. But now they make their own. :D

    Ang lufet ng Speaker mo pre! :D :D :D Not to mention the Monitor!
    Last edited by pajerokid; August 11th, 2003 at 04:50 PM.

  12. Join Date
    Oct 2002
    Posts
    10,603
    #232
    ssaloon: GF4 MX400 siguro nearest competitor. Tignan mo yung post ko above.

  13. Join Date
    Jan 1970
    Posts
    305
    #233
    Originally posted by mbt
    krscla,

    you'll have to upgrade your cooling systems. get a large, high-quality CPU heat sink/fan (a high-end GlobalWin, for instance). mura lang to, about 1000+ at most.

    next, improve the air circulation in your case (especially if its closed) by adding an intake fan at the bottom front, an exhaust fan below the power supply if the case can accomodate it. also, organize the cables and wires in the case (tie them together) so they don't block the airflow. finally, you may want to upgrade to a high-quality power supply with two fans (a good idea anyway, whether you're having heat problems or not)
    mbt:

    :oops: Nakalimutan kong sabihin na laptop gamit ko.

    Another thing, pwede mo bang i-flash ang BIOS para mapalitan ang language nito? Yung motherboard na ipinalit sakin alien ang language eh... :thanx:

  14. Join Date
    Jun 2003
    Posts
    143
    #234
    Pwede i-flash bios kaya lang delikado.Dapat me ups ka. Ingat kasi pag nag brown-out patay bios mo.Dead and chip ng bios.Bihira pa naman ang gumagawa nyan.

  15. Join Date
    Oct 2002
    Posts
    3,144
    #235
    pk,

    he he thanks. pero yong lcd nakakabit sa lumang cpu, pinalitan ko lang ng video card, gp2 at 64mb ram, took the old sony 17" crt para sa radeon equipt pc.

    another improvement I made: kinalas ko yong cpu case, save for the mountings, then fixed everything sa cabinet. What can be seen is the keyboard, mouse and monitor. Appropriate ventilation holes were made sa wooden enclosure ng cpu.

  16. Join Date
    Oct 2002
    Posts
    10,603
    #236
    a wooden cabinet? wow! that i have to see :cool:

  17. Join Date
    Oct 2002
    Posts
    4,801
    #237
    Mga kapatid, any recommended computer store? My bro in the Phils. wants a PC, sabi ko jan na lang bumili dahil ang shipping from US would cost half as much ng price...hehehe. Pero di ko alam kung saan ang mura at ma-ayos na store jan. ang requirements nya lang is P4 processor. katatapos lang mag schooling ng PC kya ala pa gaanong alam. Then, hindi naman sya heavy user ng mga programs. Sabi ko nga, dapat Celeron lang sa kanya :jump2:

    TIA


    and yes, I am, definitely, absolutely back post-whoring in Tsikot again :king:

  18. Join Date
    Oct 2002
    Posts
    4,801
    #238
    So far, eto ang nakita ko sa e-starapple.com

    Intel Pentium 4 1.8Ghz Package 2
    PhP23,895.00

    Intel Pentium 4 1.8Ghz processor
    ASUS P4S533MX motherboard
    256MB DDR memory
    1.44 floppy disk drive
    32MB Shared Graphic Accelerator
    40GB 5400 hard disk drive
    52X CD-ROM drive
    3D Audio on board
    10/100 LanCard on board
    56K internal modem
    15" SVGA color monitor
    ATX casing with power supply
    PS/2 keyboard
    PS/2 mouse with pad
    Amplified speaker

    http://www.e-starapple.com/cgi-bin/s...L=eng&P=700119

    If you ask me to tell my bro to assemle a PC himself, he has no clue at all...hehehe

  19. Join Date
    Jun 2003
    Posts
    143
    #239
    Better try pcx.com.ph better price than that.

    Intel Pentium 4 1.8Ghz Package 2
    PhP23,895.00

    Intel Pentium 4 1.8Ghz processor =dapat 2.0+ pataas
    ASUS P4S533MX motherboard =luma na
    256MB DDR memory
    1.44 floppy disk drive
    32MB Shared Graphic Accelerator = patay ka dito kakainin mem mo!! try a separate video card

    40GB 5400 hard disk drive = 80 gig na 7200 rpm halos 1k lang ang diff
    52X CD-ROM drive
    3D Audio on board
    10/100 LanCard on board
    56K internal modem
    15" SVGA color monitor = better 17 na!!!
    ATX casing with power supply
    PS/2 keyboard
    PS/2 mouse with pad
    Amplified speaker

  20. Join Date
    Oct 2002
    Posts
    10,603
    #240
    ey Karding! Welcome back! Saan ka naman nag sususuot?! hehe

    Its all a matter of budget pare!

    Maraming shops ngayon na nagaasseble.

    try to look for good packages here...

    www.rsuncomputers.com

    or better yet (more branches kasi)

    www.pcx.com.ph

Anything And Everything Pc