Nissan Vanette [Merged threads]

[butsok]

Guys i've just acquired my Nissan vanette and i'm starting to re-condition it but DIY na lang sana sa mga pwede DIY. I've just recover the AC, so OK na yung AC nya. My next move is to change the air filter, clean the spurplug, clean carb then change oil then adjust the idling... any one here known a site for the engine of vanette or anyone can teach me where's the idling adjustment located.. hope to here soon..thanks a lot

[tph]

this might help bro


http://www.courtesyparts.com/nissan-manual/index.html

[kaKiko]

hei brothers!
bago akong miyembro kaya pagpasensiyahan niyo na kung marami akong katanungan sa mga eksperto sa sasakyan lalo na sa mga van na pang-pamilya. Am planning to purchase a van but doesnt have any idea what to buy, that suits to my family of 5 members. Anyone who could suggest please i appreciate it very much in advance. He he he kaso mga bro limited budget lang ako eh, mga 175 to 200k lang kaya ko. pasensiya na kayo wala ako kasi alam pagdating sa sasakyan probinsiyano man ako manong, kaya konting unawa lang sa parte ko mga ka-grupo. I've read a lot in the thread about nissana vannette, liteace, townace, L300 but i want the members personal suggestions about this request.
naimbag nga aldaw u amin! (good day to all of you!)
kaKiko

[niky]

The most practical would be an L300, but the L300s in your price range are all pretty old.

With Vanettes, Liteaces and Townaces, the biggest issue is cooling. radiator and overheating problems are common on those vehicles.

The most comfortable, personally, is the Vanette. The later models have second row captain's chairs, console drink coolers (very useful) and twin radiator fans to alleviate the tendency older ones had for overheating. It's a very family friendly van, only let down by its tendency to drink lots of gas in traffic.

[CVT]

The most practical would be an L300, but the L300s in your price range are all pretty old.

With Vanettes, Liteaces and Townaces, the biggest issue is cooling. radiator and overheating problems are common on those vehicles.

The most comfortable, personally, is the Vanette. The later models have second row captain's chairs, console drink coolers (very useful) and twin radiator fans to alleviate the tendency older ones had for overheating. It's a very family friendly van, only let down by its tendency to drink lots of gas in traffic.

Agree here with the Vanette. I still own a '98 model and I must admit that it still is the 'apple of my eyes', inspite of my 'other' 05 van and car.....

What I specially like about this van is that the rear mirror can be lifted independently. Great for stacking your groceries. Also, best headlights, coolest aircon, second row captain's chairs, very light power steering, cooler box, and it's just the footprint of a regular car,

BTW, I had the second condenser repositioned and added another auxiliary fan, so the overheating is gone....

Gas consumption?.... just be gentle on the gas pedal (not necessarily my style though).....

4303:gun:

[yapoy86]

Guys i've just acquired my Nissan vanette and i'm starting to re-condition it but DIY na lang sana sa mga pwede DIY. I've just recover the AC, so OK na yung AC nya. My next move is to change the air filter, clean the spurplug, clean carb then change oil then adjust the idling... any one here known a site for the engine of vanette or anyone can teach me where's the idling adjustment located.. hope to here soon..thanks a lot

malapit sa throttle cable..medyo kailangan mo tangalin yung takip ng battery and yung small cover sa side na may 3 screws.. dun mo masisilip yung throttle adjustment screw (may spring yun na Philips screw) then yung philips screw na gagamitin mo pang adjust dapat mahaba and you will insert sa may side ng battery para maabot yung idling adjustment.. sipatin mo lang maigi at pag na shoot mo yung screw adjust mo na lang sa tama...

also dont be confused with the Air Fuel Ratio adjustment screw...kasi baka yun ang ma adjust mo lalakas sa fuel yan

[BackSpace]

Vanette owner tanong ko lang anong size ng stock tire nya I recently got a Mazda3 gusto ko palitan ng goma sayang naman kung i swap ko less than 5K pa lang ang na tatakbo pwede kaya sa Vanette bigay ko nalang sana sa relative ko na may vanette. pero sure ako yung rim hindi pwede kasi 5holes ang mazda3 4 lang ang sa van.

[1D4LV]

imho, its 195/15/65.

[Eismann]

Parang 185R14 yata....I'll check with my brother. He inherited our vanette.

[CVT]

Stock rim is 14 inches. I still own one....

I'll check the exact tyre dimension when I get home tonight.... (I think it is 185 R14, though)....

6505:Bath:

[CVT]

Ang aga-aga namang lumabas ni double-post bro....

6505:Bath:

[BackSpace]

ano ba talaga mga kuya hehehehe kasya kaya yung pang mazda3 ko or trade in ko nalang

[B2Bomber]

ano ba size nung goma at rim (diameter and width) na nasa Vanette ngayon? ano rin yung size ng goma na manggagaling sa M3. goma lang plano mo ipa-arbor sa vanette tama ba?

[CVT]

Confirmed,- 185R14C..... 102/100Q ang load index... Just checked it on our Vanette in the garage....

6505:Bath:

[shumaker66]

185/14,my vanette kc ako.bka gusto mo bilhin ung2nd row seat ko.meron pa ko.and ung umaalalay sa shock sa likod.ung goma.pls. txt me on ds no.09107034596

[budz522]

Pards, patulong naman. Hirap na ko sa 2nd hand vannette n nabili ko. lumalabas 3km/l lang ang tinatakbo sa city driving. pano ko ba madadagdagan ang milage nya. sabi palitan ko daw ng 4k carburator, pwede ba yun? ano ba ang average km/l ng vannette 2.00 gas? wala kasi ko alam masyado sa cars. tsaka saan ba may magandang repair shop/ supply na mura ?

[CVT]

I own a 1998 Vanette and its rate of fuel consumption is still 6Km/L city driving. Around 7.5Km/L highway driving, both A/C on... Sorry, cannot help you on where you can go for the problem. Just giving you some benchmark numbers....

6707:choir:

[bongskie_08]

Magandang araw mga ka-tsikot! Sa mga may vanette, baka may alam kayo na body repair shop na pwedeng ko ipagawa ang vanette '96 ko. Marami na kasing tama. Thanks and god bless....

[ghosthunter]

All Nissan vanette threads merged into this one.

[iluvmynissan]

adjust mo pare yung fuel/air mixture screw dun sa carburetor. pag alis mu ng takip na may 3 screws sa likod ng front pasenger seat makikita mo yung screw pare pag pihit dun alisin mu din yung takip ng battery insert mo ang flat screwdriver sa may butas left ng battery. pagandar mu paki plug (sara han mu) yung rubber hose na papunta sa takip ng carburetor tapos i close mo yung mixture screw clockwise hanggang mamatay matay then counterclockwise hanggang lumakas idling between yung dalawa na clock stops dun mo itigil yung pihit. At kung pwede check your valve clearances ang vanette dapat 10 thousandths of an inch lahat intake or exhaust.