*testa Same lang din ba ang part number ng local at jdm na belt?
Posted via Tsikot Mobile App
*testa Same lang din ba ang part number ng local at jdm na belt?
Posted via Tsikot Mobile App
Bg. Ginamitan ko ng tester. Delikado lang to pag naiwan sa on yung susi ng matagal.
Nabili ko kanina. 2 micron fuel filter with water separator. Ang cute kasi binilhan ko dalawang pajero ko.
Rt. Di ko pa nakakabit. Kakabili ko lang. Before the oem fuel filter ko ilalagay. Or dapat ba after?? Mas mataas micron rating nito za oem. Choice of 2, 10 or 30 micron yung filters. Sa traczone ko inorder sa subic.
Complete din sila sa baldwin bd 28 and 7028. 7534 etc; donaldson na filters. Mas mura kaysa prices sa manila.
Last edited by promdiboy; March 31st, 2014 at 08:35 PM.
Hehe hindi ko alam if nefore or after the OEM filter but I reckon na better if after OEM filter na para mas pino na ang sala niya. Sayang kung mabilis ma-clog eh.
Suwerte mo sir at meron niyan tapos BD7028 pa na mura dyan sa lugar mo. BD7028 at BD7534 ba boss magkakano? hehe
Ayos, mukhang may bagong makukunan ng oil at fuel filters! Yun nga lang, Subic pa![]()
Yung bd28 is only 630 each. Traczone sa tapat ng mansion garden hotel. Sa likod ng dating traders.
Bg 3600 lang tong filter. Kaso order basis. Di sila nag stock.
Pajd , so do you think dapat gawin kong secondary tong 2 micron? Patulong naman newbie pa ako sa filters.dapat ba 10 or 30 microns kukunin ko?
Last edited by promdiboy; April 1st, 2014 at 01:11 AM.
PB tama ba basa ko 3600?
I'd go with the secondary filter set-up dyan, para yung larger particles gets trapped at the standard filter, then those that get pass it get filtered by your 2 micron filter. Kung other way around kasi useless na yung standars filter... IMHO
Hmmm traczone? Sister company kaya yan nung nsa abad santos dito sa manila?
Posted via Tsikot Mobile App
Yep bg 3600 lang. Pwede na. US made pa racor.maganda rin yung setup nung mga inlet niya. Depends saan mo ilalagay pwede mo piliin kung saan side yung in and out. Pwedeng T or U yung position ng hose.
Usually before the priming pump nilalagay yung secondary filter para ma-prime yung air. Pero baka sakal masyado yung 2 microns sa atin.
Posted via Tsikot Mobile App
PB, observe mo mabuti kung hindi mahihirapan yung IP sa 2 microns. May be to restrictive. The 4m40 is not that sensitive to a bitnof dirty fuel so baka lang overkill ang 2 microns.
Posted via Tsikot Mobile App
Pinapalitan ko nalang ng 30 micron yung unit kaso 2 weeks waiting time uli. Bait kausap traczone![]()
Cb tunawag lang ako sa landline. Balik ako in 2 weeks daw. Pm mo ko maybe i can help you.![]()
I was in Subic last week kaso forgot to go to traczone. Will be back this weekend to stock up on my filter requirements. PB good you changed to 30 microns coz para talagang overkill pag 2 microns
Posted via Tsikot Mobile App