New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 384 of 718 FirstFirst ... 284334374380381382383384385386387388394434484 ... LastLast
Results 7,661 to 7,680 of 14348
  1. Join Date
    Jul 2006
    Posts
    102
    #7661
    Quote Originally Posted by gearguru View Post
    hello all,

    my pajero fm is still exhibiting some vibrations despite replacing my tranny support 4 months ago (and changing the rubber just last week). i was asking the mechanic if my engine mounts are still good and was told yes but i feel this is not the case as vibration is evident during start-up and when i'm slowing down. with this, i decided to just replace the engine mounts (double thinking of replacing my trannies also as i have accepted the fact that the one i got is a lemon).

    with that said, anyone has a list of the mounts i should be buying? tried reading through the parts catalogue but it made me more confused. i saw mixed reviews as well whether OEM is the way to go.

    appreciate your assistance on this.


    regards,
    dino
    Last week since my Pajero Fieldmaster had some vibration, I replace the transmission support with brand new Original Mitsubishi tran support. The vibration actually got worst. I ended up replacing the 2 engine support and transmission transfer case (with mitsubishi originals). Now my fieldmaster has no vibration and runs like brand new. I believe once you replace one of the supports you have to replace all of it. Nagdodomino effect kung paisa isa lang. Medyo Mahal lang nga. Better to use original Mitsubishi parts. Hope this helps.

  2. Join Date
    Feb 2013
    Posts
    157
    #7662
    Quote Originally Posted by thebest View Post
    Last week since my Pajero Fieldmaster had some vibration, I replace the transmission support with brand new Original Mitsubishi tran support. The vibration actually got worst. I ended up replacing the 2 engine support and transmission transfer case (with mitsubishi originals). Now my fieldmaster has no vibration and runs like brand new. I believe once you replace one of the supports you have to replace all of it. Nagdodomino effect kung paisa isa lang. Medyo Mahal lang nga. Better to use original Mitsubishi parts. Hope this helps.
    Thanks for sharing this info. May I ask if you can share with me the list of stuff that you bought? Would really appreciate it if you can include the spare part numbers as I will be ordering this from Cebu.

  3. Join Date
    Feb 2008
    Posts
    9,431
    #7663
    question lang. will this fit in our dashboard kaya? iba kasi yung case nung mga naka post sa taas.




    and do i need a sensor for the water temp? or i can just tap it to the stock water temp sensor?
    Last edited by crazy_boy; June 28th, 2013 at 06:22 PM.

  4. Join Date
    Jul 2007
    Posts
    2,848
    #7664






    Kasya yan malamang... or gawa ka lang ng bagong housing kung masyadong malapad yan...
    Last edited by blue_gambit; June 28th, 2013 at 11:30 PM.

  5. Join Date
    Feb 2008
    Posts
    9,431
    #7665
    Quote Originally Posted by blue_gambit View Post






    Kasya yan malamang... or gawa ka lang ng bagong housing kung masyadong malapad yan...
    Problema walang kasamang water or oil temp sensor yung gauge.

  6. Join Date
    Dec 2009
    Posts
    54
    #7666
    San kaya nakakabili ng stainless sa ibabaw ng front bumber or overider to get the EU inspired look

  7. Join Date
    Feb 2008
    Posts
    9,431
    #7667
    Quote Originally Posted by autokits View Post
    San kaya nakakabili ng stainless sa ibabaw ng front bumber or overider to get the EU inspired look
    Kung gusto mo ng euro, si garage customs ang 1 stop shop

  8. Join Date
    Jul 2007
    Posts
    2,848
    #7668
    Quote Originally Posted by autokits View Post
    San kaya nakakabili ng stainless sa ibabaw ng front bumber or overider to get the EU inspired look

    You've got PM, dont know the guy personally. but saw his post at PPAC forum

  9. Join Date
    Oct 2009
    Posts
    251
    #7669
    CB meron atang nabibili na sensor na after market kaya nga ayaw kong patulan yong binebenta dati for 6k na ganyan kasi walang mga sensor na kasama kaya hintay mode na lang

  10. Join Date
    Feb 2008
    Posts
    9,431
    #7670
    Quote Originally Posted by rols View Post
    CB meron atang nabibili na sensor na after market kaya nga ayaw kong patulan yong binebenta dati for 6k na ganyan kasi walang mga sensor na kasama kaya hintay mode na lang
    Sabi ni third, iba daw yung pang lancer evo. Ano ba dapat yung swak sa FM natin? Dumating na yung sayo doc?

    Sent from my GT-I9300 using Tapatalk 2

  11. Join Date
    Oct 2009
    Posts
    251
    #7671
    may dumating pero walang boost gauge pahirapan na din maghanap ngayon meron pang may isang tinatago na ralliart ed na ganyan si Toti ewan ko lang kong magkano yong price nya pero malamang presyo ng hindi ibebenta hehehe

  12. Join Date
    Feb 2008
    Posts
    9,431
    #7672
    Pang pajero evo ba yun rols?

    Sent from my GT-I9300 using Tapatalk 2

  13. Join Date
    Nov 2004
    Posts
    507
    #7673
    Quote Originally Posted by junerski View Post

    If willing ka bumiyahe sa eastern side ng metro, try mo sa Balikbayan Motors along Marcos Highway... General Service/talyer yan and Im pretty sure sanay sila magpalit/inspect ng clutch may it be Pajero or other models (linggo linggo may ginagawa dun nakababa for repair) ...look for Mar. He's been my trusted mechanic ever since so for sure hindi ka lolokohin... give him a call 681-8763. Tell him I referred you to him... Jun from Town and Country naka white na Pajero

    Or pwede rin kay Jay ng Eco-Tech... Former employee of Mitsubishi so kung sa familiarity, wala ka rin problema... Shop nya along Sumulong highway around 15min from Masinag... give him a call at 646-7985... He knows me naman by the name of Paolo (Nickname ko kasi yung Jun)

    PM mo ko Ill be more than happy to meet you and endorse you to them.
    Thanks ser jun!

  14. Join Date
    Jul 2006
    Posts
    102
    #7674
    Quote Originally Posted by gearguru View Post
    Thanks for sharing this info. May I ask if you can share with me the list of stuff that you bought? Would really appreciate it if you can include the spare part numbers as I will be ordering this from Cebu.
    The parts I bought are 2 engine supports (around 3100 to 3500 each, 1 transmission support (around 3600) and 1 transfer case support (1380). all original parts. I don't think the part numbers are needed just mention to the shops year and model of your pajero.

    I heard parts are cheaper in Shaw Merchandising (027181082). I bought my parts in mitscars in ligaya pasig area since it is near my house.

  15. Join Date
    Jul 2013
    Posts
    4
    #7675
    mga sirs, patulong nmn baka my idea kayo kung ano problemang fm ko kc minsan klngan 2 attempts ako bago mgstart and matagal sya bgo mgstart ngpalit na ko ng glow plugs ko 3 mos ago, minsan nmn 1 attempt nga pero mga 3-5 secs bago mgstart. salamat po!

  16. Join Date
    Oct 2002
    Posts
    1,977
    #7676

    happy 100,000kms to my ride:D

  17. Join Date
    Jul 2006
    Posts
    102
    #7677
    Quote Originally Posted by AC View Post

    happy 100,000kms to my ride:D
    Cool... Is this local or JDM unit?

  18. Join Date
    Feb 2008
    Posts
    9,431
    #7678
    Quote Originally Posted by thebest View Post
    Cool... Is this local or JDM unit?
    AFAIK, local gen 2 yung kay AC

  19. Join Date
    Feb 2013
    Posts
    157
    #7679
    Quote Originally Posted by pajiefm View Post
    mga sirs, patulong nmn baka my idea kayo kung ano problemang fm ko kc minsan klngan 2 attempts ako bago mgstart and matagal sya bgo mgstart ngpalit na ko ng glow plugs ko 3 mos ago, minsan nmn 1 attempt nga pero mga 3-5 secs bago mgstart. salamat po!
    needs calibration no doubt

  20. Join Date
    Sep 2007
    Posts
    8,452
    #7680
    Kita ko sa FB ni Garage Custom. Haaaaaay...



    Sent from my GT-N7100 using Tapatalk 2

Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]