My Mazda 2 sedan been with Mazda Pasig 3rd day now due to intermittent tok sound sa Front right after ng 1000km check. Still under diagnostic test pa din daw, sana lumabas na today. Sana Hindi to lemon.
My Mazda 2 sedan been with Mazda Pasig 3rd day now due to intermittent tok sound sa Front right after ng 1000km check. Still under diagnostic test pa din daw, sana lumabas na today. Sana Hindi to lemon.
Is the tok sound normal when releasing the break from full step to skyactiv cars? Thats what they told me at mazda north edsa and mazda pulilan.
Could be the same issue that plagued the first few 3s (including mine). Symptom was a tok sound when going over a speed bump. It took a while and quite a bit of experimentation with grease and a rubber hose (and some inputs from Japanese techs) before they finally found the solution: shock insulators. Once this was confirmed it only took them about a week from diagnosis to parts delivery and an hour to install.
That's fast turnaround time in your case JohnM, waiting time for delivery for my insulators is a whopping 5 weeks, now currently in my 2nd week waiting. I am very tempted to cross-check with Berjaya if this is normal waiting period, as I'm beginning to suspect Pasig is just being lazy/inefficient.![]()
Thats a consequence with a brand that is not mainstream/popular and/or one that has no local factory. A problem shared with the Koreans. "Exclusivity" cuts both ways. Shame though, if this is already a recognized problem, MazdaPh should stock up on the part and retrofit the affected cars as soon as they come in for PMS if not issue a recall.
Is it possible to enhance the zoom soom sound without voiding the warranty like changing something in the exhaust pipe? 😞
I sent the 3 in for diagnosis as soon as I heard that they were already installing insulators. Swerte lang siguro that a shipment was already on the way and I was on top of the list. 3 parts all come from Japan so there should be a reasonable delay. I'm not sure if the Thai-made 2 will encounter the same issue but with production still ramping up there will be some shortages here and there. Ask for an ETA.