New XTRM Owner

[fabilioh]

ang lalagyan mightybond pre yung screw lang para di mapwersa ng ikot sa labas, not the window itself pre. ingat ingat. ako nagpapalit ng alarm kahapon ng maayos na klase para sure. kung wala naman tayo balak idispatsa rides natin might as well take good care of it

thanks, actually ang naiisip kong magkakamantsa eh yung glass around the screws, konting ingat nalang siguro

[marcmervin]

sige bro, pag may nakita ako. yung sa akin actually yung bulb lang kailangan ko kasi pundi na, di ko lang kasi alam anong bulb type para sa foglamps.

H3 bulb nyan

[fabilioh]

H3 bulb nyan

ok thanks sir!

[NighthawkGT]

CONS:
1. Puny front wheel bearing - Mabilis masira dahil masyadong maliit para sa XTRM. Halos kasing laki lang ng front bearing ng Kia Pride. :D

Ano kaya pwedeng modifications na gawin dito.. i think our isuzu Hilander's front wheel bearing was replaced the 8th time already! its getting annoying na.. pwede kayang mag salpak ng ibang surplus hubs ng ibang isuzu na mas malaki yung wheel bearing?

2. Weak brakes - I'm not sure if the Michelin LTX tires make it worst, but some non-AT tires will improve its braking-grip capability or use a high-end Brake pads.

Eto ren problema namen.. napakaliit ng brake rotor niya compare to the size of the wheel.. parang mismatched eh.. same design flaws rin like the bearing siguro to..
meron kayang bigger diameter rotors+calipers for this particular model of isuzu hilander XTRM?

3. Weak and lousy door hinges.

yep, we broke the driver side door hinge already.. costed us almost 2k sa casa.. wtf.

[torogi kid]

CONS:
1. Puny front wheel bearing - Mabilis masira dahil masyadong maliit para sa XTRM. Halos kasing laki lang ng front bearing ng Kia Pride. :D

Ano kaya pwedeng modifications na gawin dito.. i think our isuzu Hilander's front wheel bearing was replaced the 8th time already! its getting annoying na.. pwede kayang mag salpak ng ibang surplus hubs ng ibang isuzu na mas malaki yung wheel bearing?

2. Weak brakes - I'm not sure if the Michelin LTX tires make it worst, but some non-AT tires will improve its braking-grip capability or use a high-end Brake pads.

Eto ren problema namen.. napakaliit ng brake rotor niya compare to the size of the wheel.. parang mismatched eh.. same design flaws rin like the bearing siguro to..
meron kayang bigger diameter rotors+calipers for this particular model of isuzu hilander XTRM?

3. Weak and lousy door hinges.

yep, we broke the driver side door hinge already.. costed us almost 2k sa casa.. wtf.

yup, ganun din ang napuna ko sa xtrm ko, makisingit nga, pareho ba bearing ng crosswind sa hilander xtrm? baka pwde isalpak ang hub ng xwind sa hilander?

[torogi kid]

up ko lang, answers will be greatly appreciated. thanks in advance.

[fabilioh]

up ko lang, answers will be greatly appreciated. thanks in advance.

di ko rin actually alalm kung swak yung sa crosswind mukhang bibigay na naman bearings ko, parang nararamdaman ko na eh

[i_van]

sir, pa-subscribe lang...hoping to continue this thread...very soon.

[greenextreme]

Regular repacking ng bearings with good king of grease will prolong the front bearing life.

[greenextreme]

Regular repacking ng bearings with good kind of grease will prolong the front bearing life.

[fabilioh]

sir, pa-subscribe lang...hoping to continue this thread...very soon.

this thread will come in very handy sir

[TholitzReloaded]

Thanks for all the info, will try to look around for either Bosch or Bendix pads

Magkano ba price tag Bendix or Bosh and san ba makakabili nito? recently nagpalit ako ng pads pero ang nabili ko sa Jayson Replacement lang TDK, gamitin ko lang muna to for 2mos then palitan ko rin ng Bendix or Bosh or di kaya OEM medyo may kamahalan lang ang OEM 3.5k agad

[fabilioh]

Magkano ba price tag Bendix or Bosh and san ba makakabili nito? recently nagpalit ako ng pads pero ang nabili ko sa Jayson Replacement lang TDK, gamitin ko lang muna to for 2mos then palitan ko rin ng Bendix or Bosh or di kaya OEM medyo may kamahalan lang ang OEM 3.5k agad

sir yng huling bili ko na bendix sa suking auto supply lang

[flying_fox]

Up for this thread and more inputs for the Owner of Isuzu Hi-Lander XTRM..

my mother own a XTRM and she always asking me about the maintenance of this car because of a 2002 model and the ODO is 200K.

This is very helpful to me because this thread can give an idea what i will do to the maintenance of my mothers car...

i hope you will share also about the Shock absorber. What is the better brand? and reasonable price... TIA