Results 21 to 30 of 34
-
October 31st, 2008 04:49 PM #21
-
Tsikot Member
- Join Date
- Dec 2008
- Posts
- 1
-
-
August 26th, 2009 06:23 PM #24
CONS:
1. Puny front wheel bearing - Mabilis masira dahil masyadong maliit para sa XTRM. Halos kasing laki lang ng front bearing ng Kia Pride. :D
Ano kaya pwedeng modifications na gawin dito.. i think our isuzu Hilander's front wheel bearing was replaced the 8th time already! its getting annoying na.. pwede kayang mag salpak ng ibang surplus hubs ng ibang isuzu na mas malaki yung wheel bearing?
2. Weak brakes - I'm not sure if the Michelin LTX tires make it worst, but some non-AT tires will improve its braking-grip capability or use a high-end Brake pads.
Eto ren problema namen.. napakaliit ng brake rotor niya compare to the size of the wheel.. parang mismatched eh.. same design flaws rin like the bearing siguro to..
meron kayang bigger diameter rotors+calipers for this particular model of isuzu hilander XTRM?
3. Weak and lousy door hinges.
yep, we broke the driver side door hinge already.. costed us almost 2k sa casa.. wtf.
-
September 29th, 2009 10:13 AM #25
-
-
December 22nd, 2009 09:50 AM #27
-
-
Tsikot Member
- Join Date
- Nov 2008
- Posts
- 3
January 2nd, 2010 11:15 PM #29Regular repacking ng bearings with good king of grease will prolong the front bearing life.
-
Tsikot Member
- Join Date
- Nov 2008
- Posts
- 3
January 2nd, 2010 11:16 PM #30Regular repacking ng bearings with good kind of grease will prolong the front bearing life.
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start