isuzu hilander owners

[fabilioh]

Fabs, pa check mo yung compressor bearing baka me tama na, sakin dati pag matulin takbo ko medyo nawawala. tapos me chirping sound sa compressor, baka ganun din. I just dont know if na re-replace yung compressor bearing ng hi-lander.

hmmm...akin naman parang hissing sound, baka bearing nga, pa check ko na rin. thanks bro!

[mr_manoy]

Yung sakin yung hole lang talaga cover ng shift boot, and I'm fairly sure its the original...

So to clarify, ok lang yung gear oil na 90 na gamit ko?

Of course! As of 1999-2000 I think GL3 protection lang available, ie regular engine motor Oil. Lumabas na XTRM model when GL4 gear oil came out kaya di cguro narecommend . Better protection with GL4 as additive coats metal surfaces to lessen metal-to-metal wear. Additive coating protects metal during contact.

Warning lang sa GL-5

[mr_manoy]

I thought shift boot continuously goes all the way to tranny top, my bad. 2 separate pieces pala, hole cover with big round block sitting on tranny and tranny shifter cover

[mr_manoy]

Fabs, pa check mo yung compressor bearing baka me tama na, sakin dati pag matulin takbo ko medyo nawawala. tapos me chirping sound sa compressor, baka ganun din. I just dont know if na re-replace yung compressor bearing ng hi-lander.

Yes napapalitan yun. Big job yun. Then there the need for oil balancing na kahit sa Denso e di alam kun paano. They leave it to the machine to do its thing w/c may not be right. Then there's the flushing na OEM don't advice coz of residual mat and technician laziness. Then there's PAO, POE, PAG oils that tech think are the same and can be mixed.

Hay buhay. Suma total ask shop how they evacuate, flush, vacuum and fill with freon. Right freon fill give 1C temp with low side at 28 PSI, 280-300 PSI high side at 85F ambient temp all at constant engine speed of 1500 RPM. Static should be at ambient temp equal in PSI as read on manifold gauges, both low side and high.

Too much info ba...hehehehe

[mr_manoy]

Gambit bro,
nirecommend nang mech ko fill thru shifter hole only beacause we don't have the gun to fill it thru plug hole, no special reason...hehehe. But damn too much work in taking out console and boot and shifter quadrant and replacing them

Diff oil I think should be thicker at 140 grade GL4 as differential carries much of the load in power transmission, 30% more than that of tranny though don't know what manual recommends

[fabilioh]

Yes napapalitan yun. Big job yun. Then there the need for oil balancing na kahit sa Denso e di alam kun paano. They leave it to the machine to do its thing w/c may not be right. Then there's the flushing na OEM don't advice coz of residual mat and technician laziness. Then there's PAO, POE, PAG oils that tech think are the same and can be mixed.

Hay buhay. Suma total ask shop how they evacuate, flush, vacuum and fill with freon. Right freon fill give 1C temp with low side at 28 PSI, 280-300 PSI high side at 85F ambient temp all at constant engine speed of 1500 RPM. Static should be at ambient temp equal in PSI as read on manifold gauges, both low side and high.

Too much info ba...hehehehe

sir paki translate naman, hehehe. or pwede siguro print ko nalang to and pakita ko sa suking shop ko

[pau31pau]

Good day fellow hilander owners! Mine is a '99 Isuzu SL Hilander.. Ask ko lang po sana kung may mga specific brands ba ang centerlink ng Hilander natin? Medyo malakas po kasi ang kabig pa-kanan, pinasilip ko na po to recently and they suggested to replace the centerlink.. And pag todo kabig coming from a reverse, biglang may lalagitik galing sa gulong.. Actually kapapalit lang po nito 2yrs ago sa Rapide, inabot kami ng P14k tapos hindi naman tumagal.. Patulong na lang mga sir, ayoko na kasi maloko wala pa man din akong alam masyado sa mga automotive parts.. TIA mga sir!

[blue_gambit]

Yes napapalitan yun. Big job yun. Then there the need for oil balancing na kahit sa Denso e di alam kun paano. They leave it to the machine to do its thing w/c may not be right. Then there's the flushing na OEM don't advice coz of residual mat and technician laziness. Then there's PAO, POE, PAG oils that tech think are the same and can be mixed.

Hay buhay. Suma total ask shop how they evacuate, flush, vacuum and fill with freon. Right freon fill give 1C temp with low side at 28 PSI, 280-300 PSI high side at 85F ambient temp all at constant engine speed of 1500 RPM. Static should be at ambient temp equal in PSI as read on manifold gauges, both low side and high.

Too much info ba...hehehehe

Hmmm so complex....

[fabilioh]

Hmmm so complex....

[ExROLLA]

[SIZE=4]good day, sirs: i'm planning to replace the nozzle tips of my 97 hilander... may nakapagpalit na ba sa inyo ng nozzle tips... how much po ang isa and how much din po aabutin ang labor? TIA!![/SIZE]

[Hazard14]

San po ba pwede bumili ng original fog lights para sa 2000 model na Isuzu hi-lander XTRM pati na rin po side mirrors, maluwag na kasi yung sa driver's seat side na side mirror ng sasakyan namin. At magkano po?

[Hazard14]

Mga kuya saan po ba pwede makakuha/bili or DL ng user manual ng 2000 hi-lander XTRM na user manual? Baka po kasi may mga guidelines dun na makakatulong kung paanu ma-maintain yung kotse namin. Newbie pa lang po ako d2.

[fabilioh]

Mga kuya saan po ba pwede makakuha/bili or DL ng user manual ng 2000 hi-lander XTRM na user manual? Baka po kasi may mga guidelines dun na makakatulong kung paanu ma-maintain yung kotse namin. Newbie pa lang po ako d2.

pareho pala tayong ride sir taga saan kayo? mayroon pa ata ako, pwede ko pahiram para ma photocopy niyo. Madali lang naman magmaintain ng sasakyan natin, basta alaga lang sa change oil every 5k kms, palit ng fuel and air filters, at walang magiging major problem. Onga pala, kailangan din alagaan yung wheel bearings, yun ang sakit ng hi-lander, masyadong maliiit lalo na sa XTRM na mas malaki ang gulong. Kailangan lang alaga sa grasa.

Hope this helps.

[Hazard14]

pareho pala tayong ride sir taga saan kayo? mayroon pa ata ako, pwede ko pahiram para ma photocopy niyo. Madali lang naman magmaintain ng sasakyan natin, basta alaga lang sa change oil every 5k kms, palit ng fuel and air filters, at walang magiging major problem. Onga pala, kailangan din alagaan yung wheel bearings, yun ang sakit ng hi-lander, masyadong maliiit lalo na sa XTRM na mas malaki ang gulong. Kailangan lang alaga sa grasa.

Hope this helps.

Taga muntinlupa po ako hehe, thanks po sa tip

[tabuso286]

cge cge ako taga makati pag mapagawi ka d2 pahiramin kita ng manual, ipa photocopy mo, anyway tama sabi ni sir madali lang e maintain sasakyan natin.

Sabay eyeball na hehehe, wala pa ako nakaka eyeball masyado

[Hazard14]

Mga kuya may nakita po akong link tungkol ata sa mga engine na gawa isuzu, nakalagay workshop manual eto po yung link

http://www.onlinefreeebooks.net/auto...anual-pdf.html

Share ko lang po yung nakita ko

Puro ata sa engine to

[dongmbb]

Mga kuya may nakita po akong link tungkol ata sa mga engine na gawa isuzu, nakalagay workshop manual eto po yung link

http://www.onlinefreeebooks.net/auto...anual-pdf.html

Share ko lang po yung nakita ko

Puro ata sa engine to

Bro, wala ka bang nakita na pang 4JA1 engine? paki post naman kung meron.

[Hazard14]

Bro, wala ka bang nakita na pang 4JA1 engine? paki post naman kung meron.

Try ko po maghanap sa saturday. Pasukan na naman kasi baka maging medyo busy na ako. Naghahanap po kasi me ng user manual para sa 2000 hi-lander XTRM namin.

Try ko po makahanap ng may 4ja1 which is engine din ng amin

[Hazard14]

Bro, wala ka bang nakita na pang 4JA1 engine? paki post naman kung meron.

Try ko po maghanap sa saturday. Pasukan na naman kasi baka maging medyo busy na ako. Naghahanap po kasi me ng user manual para sa 2000 hi-lander XTRM namin.

Try ko po makahanap ng may 4ja1 which is engine din ng amin

[torogi kid]

Try ko po maghanap sa saturday. Pasukan na naman kasi baka maging medyo busy na ako. Naghahanap po kasi me ng user manual para sa 2000 hi-lander XTRM namin.

Try ko po makahanap ng may 4ja1 which is engine din ng amin

http://www.onlinefreeebooks.net/go.p...e/isuzu4j.html
try nyo ito kung madownload. pero para sa makina lang ito.