Isuzu Dmax Owners [ARCHIVED]

[bigbaby]

thank you po sa nag welcome
2500 each po yung procomp liquid po sya
bilstein po gas mga 7k isa pang nissan mistral ang code sa box

[bigbaby]

ask ko lang po ano yung usual psi nyo sa front and rear na gulong
wala ksi ako karga parate laging mag-isa

[srbogoy]

ask ko lang po ano yung usual psi nyo sa front and rear na gulong
wala ksi ako karga parate laging mag-isa

bigbaby,, welcome dito sa thread natin bro, enjoy ur new ride,, pressure ng all tires ko 29 psi...

[Djerms]

Same as Srbogoy, I ride with 29psi on all tires. Pag loaded, I bring it up to 33psi.

[bigbaby]

thank you po sa mga reply sundin ko na rin yung 29 psi

ask ko rin po kung pwede palitan ng leafspring ng alterra yung sa dmax kse pansin ko mas manipis mga dahon nito bka gumanda lalo yung ride

[srbogoy]

[quote=Djerms;728195]Happy New Year! Uy tuloy na natin ang plano papunta Cebu! Excited nako!

Oo nga Luzon guys ituloy nyo na ang plano nyo papuntang Cebu

[Djerms]

Afaik, if you're ride already has the flex-ride product, its the same as the alterra's (correct me if I'm wrong nalang. hehe). But if you don't I think the alterra's springs will fit.

Srbogoy,
Pinag-iipunan pa. Di ka ba pupunta dito manila?

[dlim]

really? where can we buy the leafspring of d alterra? uhmm, do u know anyone who had his leafspring replaced with coil welded on the differentials sa dmax nila??

[dlim]

uy, naa mangari cebu?? kanus.a kanus.a?? hehehe

[Memphis Raines]

bigbaby - congrats on your Max and welcome to our home here at Tsikot.

dlim - nice to hear from you again, tagal mo nawala ah!

[Djerms]

Dlim,
WHy change rear suspension system if you have a pick-up? You'll end up sacrificing its capabilities. Anyway, I think I saw pics a Isuzoo.com but its not on a Dmax but on an older version rodeo pickup.

[2Dmax]

if tried and tested naman ung pagpalit mo from leafspring to coil suspension, why not? if experiment lang, mahirap yan. baka mas lalong maapektuhan ang ride comfort mo nyan due to bounciness. lot of testings and validation must be done to check and validate if the products comform to its design intention.

[jarhead]

ask ko lang po ano yung usual psi nyo sa front and rear na gulong
wala ksi ako karga parate laging mag-isa

25 at front and 22 at the rear....

[jarhead]

if you have the flexride suspension.. no need to replace it na... flexride has been installed sa 2004 models up...

[2Dmax]

jarhead/anyone,

may special procedure ba or instructions if i-dra2in ko ung fuel precipitator (yun ba tawag dun hehe) na nasa ilalim ng car just beneath the driver side? like pumping the fuel pump? tom kasi oil change na ko 30,000 km na..

[wildthing]

sir 2dmax,

hope you can read thai....pero eto ang pictorial sagot sa tanong mo on draining the fuel pump..
http://www.d-maxclub.net/d-maxclub/water.htm

HTH

[2Dmax]

sir 2dmax,

hope you can read thai....pero eto ang pictorial sagot sa tanong mo on draining the fuel pump..
http://www.d-maxclub.net/d-maxclub/water.htm

HTH

tnx pre. dapat pala ma-drain ang lahat ng nasa precipitator, then do the pumping.

[wildthing]

gawa ka ng pinoy version niyan pag diy mo (pictures and descriptions)...

[2Dmax]

gawa ka ng pinoy version niyan pag diy mo (pictures and descriptions)...

sige gagawa ko. one question pa, need pa bang i-loose ung turnilyo above the pumping knob of the fuel filter or NO NEED na? sa ibang isuzu engine, need pang luwagan ung turnilyo..

[jarhead]

fuel/water separator.... just loosen the plastic scew drain and let it drip nalng... hinid yan totaly madrain kc the fuel form the tank would contunuosly flow ng dahan2x din... and it should be drained every 5k kms.... or every change oil... maliit lang kc ang capacity niya ang to prevent any dmagae to your injection pump which is electronic already, marami na kami dmax units d2 hinid nagpaservice samin and tinking that ganun lang ang dmax... it may look simple but mejo compiclated ang hitech narin ang engine and parts niya... and change your fuel and air cleaner regularly to avoid "Check engine"- the cause is clogged fuel and air filters, the valve for the intake gets deposited with dirt that mahirap na eto gumalaw and so is the sensor...