Isuzu Dmax Owners [ARCHIVED]

**2Dmax** · January 6th, 2007 09:49 AM

Originally Posted by jarhead

fuel/water separator.... just loosen the plastic scew drain and let it drip nalng... hinid yan totaly madrain kc the fuel form the tank would contunuosly flow ng dahan2x din... and it should be drained every 5k kms.... or every change oil... maliit lang kc ang capacity niya ang to prevent any dmagae to your injection pump which is electronic already, marami na kami dmax units d2 hinid nagpaservice samin and tinking that ganun lang ang dmax... it may look simple but mejo compiclated ang hitech narin ang engine and parts niya... and change your fuel and air cleaner regularly to avoid "Check engine"- the cause is clogged fuel and air filters, the valve for the intake gets deposited with dirt that mahirap na eto gumalaw and so is the sensor...

ok thanks. sabi kasi sa manual i-pump daw after draining the water separator (0.2 liter ang madra2in na fuel). sa my pump knob kasi just above the fuel filter may turnilyong maliit (not the plastic screw of the separator). need pa kayang luwagan un or hindi na prior to pumping.

**jarhead** · January 6th, 2007 10:14 AM

yup u could pump it after plugging the screw sa separator and installing the new fuel filter and connecting all the hoses...

**dlim** · January 6th, 2007 03:09 PM

Originally Posted by Memphis Raines

bigbaby - congrats on your Max and welcome to our home here at Tsikot.

dlim - nice to hear from you again, tagal mo nawala ah!

hehe, sorry abset ko. hehe, well, ive never seen any pick up yet changed from leaf to coil, but i think its a risky step. but it sures is one way to improve the ride...

hehe, anywayz, parang matigas pa kasi ang ride ko eh, 4 leaf springs nalang nka kabit still a bit bumpy pa rin. well, ganyan talaga ang pick ups.

**dlim** · January 6th, 2007 03:15 PM

question lang, have any of you changed their center console to a more elevated one para magamit narin as an arm rest? hehe

**Memphis Raines** · January 6th, 2007 11:49 PM

Originally Posted by dlim

question lang, have any of you changed their center console to a more elevated one para magamit narin as an arm rest? hehe

Is this what you mean?

That's Isketi's console. Ganda no?!

If you want to drool more over this, more pics here:

http://tsikot.yehey.com/forums/showt...t=9940&page=43

**ian_rex** · January 6th, 2007 11:49 PM

dlim, search mo yung mga earlier posts. i think, may nagpalit na, ala alterra style.

ayun! may nagpost na pala.

**wildthing** · January 7th, 2007 09:05 AM

We'll a lot of us dmax users want to change to that arm-rest console cover...pero wala pang pupunta ng Thailand as of now to buy for us e.

**dlim** · January 7th, 2007 07:56 PM

wow... waaah.. ang ganda...

is there any available sa honk kong? kasi ang alam ko meron sa h.k ay honk kong plates lamang... hehehe

**2Dmax** · January 8th, 2007 08:13 AM

guys,

HELP!!!

i just drained the water separator and after plugging the drain plug, i pump the priming pump inside the engine compartment until strong resistance is felt for three times. huhu. ayaw umandar ng DMAX ko. pano kaya 'to?

**wildthing** · January 8th, 2007 08:05 PM

duda ko meron air sa line. para meron air bleeding plug sa water separator na nabangit sa manual page 4-39 ng owner's manual

**srbogoy** · January 8th, 2007 08:17 PM

Originally Posted by 2Dmax

guys,

HELP!!!

i just drained the water separator and after plugging the drain plug, i pump the priming pump inside the engine compartment until strong resistance is felt for three times. huhu. ayaw umandar ng DMAX ko. pano kaya 'to?

2Dmax nag air bound ang fuel line mo, try bleeding the system....

**paro** · January 9th, 2007 08:17 AM

ask lang ko kong kailan lalabas ang bago D-max yong altera look, pati yong engine na crdi na..

**2Dmax** · January 9th, 2007 08:18 AM

guys,

ok na. tumawag me ng trusted mechanic ko. wlang 5 mins ok na. he just pumped the priming pump while I cranked the engine. then umandar na. then i just let the engine idling for 20 min to completely bleed the remaining air out of the system..

**jarhead** · January 9th, 2007 12:11 PM

Originally Posted by 2Dmax

guys,

HELP!!!

i just drained the water separator and after plugging the drain plug, i pump the priming pump inside the engine compartment until strong resistance is felt for three times. huhu. ayaw umandar ng DMAX ko. pano kaya 'to?

... just crank the engine and let someone pump the fuel pump while ur cranking the engine... but dapat naka crank ka at least mga 15 secs den stop naman.... wala pa laman kc ang separator mo nyan... dont worry, ganyan dmax pag idrain ang separator....

**nick001** · January 9th, 2007 10:14 PM

question lang...

I had an alarm installed for my DMAX, autopage. Since I use this pick up for business, I also had a canopy installed, carryboy series 5.

my problem is that the alarm chirp stopped working and eventually the entire alarm will not disable once it is activated. I have to remove the fuse on the alarm to stop it. and leave the fuse out because whenever I reinsert the fuse, the alarm siren is still there. Carryboy, I think, tapped the defogger on the same line with my alarm shorted it out.

anybody who knows how to solve this problem. or at least opinion on why this is so.

just so you know. I had my alarm serviced from where I purchased it and the technician said carryboy when installing the electrical for the canopy may have tested some wires and possibly shorted the alarm. However, I told the technician to move the line for the canopy defogger to a different line and replaced the alarm with a new one.

when I got home and tested the alarm, I found out it still has the same problem. it was working fine when I left the shop.

**x_jason_x** · January 9th, 2007 10:29 PM

hmmmmm.... baka naging ganun dahil sa wirings. Kaya ako hindi na nagpakabit ng aftermarket alarm, nagstick nalang ako sa OEM keyless entry. Pacheck mo nalang sa electrician lahat ng linya.

**2Dmax** · January 10th, 2007 07:24 AM

nick001,

why did you change from stock alarm to an aftermarket one? is it because of igntion kill? like xjasonx, i don't want to change my stock alarm. very delicate kasi ang electrical system, puedeng magkaron ng chain reaction which could damage wirings.

**2Dmax** · January 10th, 2007 07:49 AM

guys,

pundi na ung 2 foglights ko. mali kasi ung ginawa ng isuzu sa 2004 and 2005 model dmax. na kapag pinindot mo ung keyless entry and nakalimutan mong i-off ung foglight switch, pati ung foglight umiilaw, kasi pangit ung switch na nilagay nila. sabi nila sa 2006 dmax, kahit makilimutan mong i-off ung foglight and pinatay mo ung makina, then pindutin ung keyless entry ok lang kasi automatic OFF kagad ung foglight..

how much kaya ang aftermarket switch na may AUTOMATIC SWITCH-OFF once pinatay na ung makina? sa mga 2006 dmax owners, papost po ng pix ng foglight swtich nyo. thanks..

**2Dmax** · January 10th, 2007 07:51 AM

up ko lang po ito guys:

anyone selling BILLET GRILLE?

**x_jason_x** · January 10th, 2007 07:55 AM

Originally Posted by 2Dmax

guys,

pundi na ung 2 foglights ko. mali kasi ung ginawa ng isuzu sa 2004 and 2005 model dmax. na kapag pinindot mo ung keyless entry and nakalimutan mong i-off ung foglight switch, pati ung foglight umiilaw, kasi pangit ung switch na nilagay nila. sabi nila sa 2006 dmax, kahit makilimutan mong i-off ung foglight and pinatay mo ung makina, then pindutin ung keyless entry ok lang kasi automatic OFF kagad ung foglight..

how much kaya ang aftermarket switch na may AUTOMATIC SWITCH-OFF once pinatay na ung makina? sa mga 2006 dmax owners, papost po ng pix ng foglight swtich nyo. thanks..

waiiit waiiitttt... dmax ko 2005. Pero parati ko iniiwan sa switch nakabukas yun fog lights, pero whenever I open the car using the keyless entry, never naman bumukas yun fog lights...

The Largest Car Forum in the Philippines

Isuzu Dmax Owners [ARCHIVED]

Thread Tools

Search Thread

Display