Isuzu Dmax Owners [ARCHIVED]

[x_jason_x]

Tulong naman, anong bulb size ng foglights ng DMax na 2003-2004? Palit sana ako HID pero hindi ko alam kung anong size. Ty in advance!

I think H3 ang bulb size ng dmax fog lights. Naka H3 pure yellow kasi ako sa fogs.

[srbogoy]

guys share ko lang itsura sa harapan ng max ko nong pinalitan ko ng aero front bumper....

[srbogoy]

Latest mods ng max ko, 20" AWC wheels with Hankook ventus st 265x50x20, mabigat ang presyo ng falken 21T each kaya hankook na lang 17T each, ayos naman malambot din ang ride nito at saka binaligtad ko na ang pinakamalaking molye ko.

[ian_rex]

ian rex___ damio na prob ng dmax mo ah... about ur power window.. look for a plasctic pulley,its the white thing where the cable runs... pull it out, the center of the pulley-pagawa ka ng bakal na square den ipalagay mo sa center ng plastik pulley but DON'T grind the plastick pulley, just hammer it down slowly kc baka ma break ang pulley...

sir jarhead, ask ko lang kung saan ka naka-kuha nung materials? saka saan ba dapat magpagawa nung bakal na square?

[OTEP]

I once planned to put indiglo under the dash in both driver and passenger side and is wired to light up everytime either doors open; good illumination for the floor especially when getting inside at night

Putting a set up like this costs around Php350 in Banawe. Cheaper if you DIY. But they use stock single contact bulbs and sockets, not indiglo. Ganun ang footwell ng Pajero ko. I got amber bulbs to match the gauges.

[2Dmax]

Latest mods ng max ko, 20" AWC wheels with Hankook ventus st 265x50x20, mabigat ang presyo ng falken 21T each kaya hankook na lang 17T each, ayos naman malambot din ang ride nito at saka binaligtad ko na ang pinakamalaking molye ko.

mas maganda siguro bogoy if tanggalin mo na lang ung leadlight cover. mas neat tignan..

[jarhead]

Tulong naman, anong bulb size ng foglights ng DMax na 2003-2004? Palit sana ako HID pero hindi ko alam kung anong size. Ty in advance!

H3 bulb yan. don tknow kung meron na ba HID for that.. welcome to the thread pala.... post your ride naman... post mo rin kun magkano kuha mo sa HID and anong brand.. tnx....

[jarhead]

sir jarhead, ask ko lang kung saan ka naka-kuha nung materials? saka saan ba dapat magpagawa nung bakal na square?

sir, pinpagawa kc yun sa machine shop.... and yun pulley, just use your original or stock na naka kabit sa power window assembly mo ngaun...

[jarhead]

sir bogoy, pwede mo lagyan ng indiglo yan grill mo.. ganda nyan tingnan din and yeah mybe you should take off the headlight cover.... or maybe yet replace your headigth asembly wioth aftermarket headloght asembly...

[x_jason_x]

srbogoy,

tangalin mo na headlight cover. MAs popogi.