Second Gen. Honda Jazz/Fit

[jun_mazda]

mga sir saan nakakabili ng RS headlight? ang ganda kasi tingnan if paired with carbon fiber hood. pwede bang pa paint nalang yung oem headlights para mag mukhang rs look

[jave]

*IMm29:

More or less, within the same numbers as I found from the web. For headers, the cheapest ones are cast iron (I imagine these are the 3-4k range mentioned a few posts back) and aluminized ones for around 5k. (Not necessarily from fremuf.)

[pcuerpo]

boss Mike, balitaan moko though si Troy, nagtanong na, wag mong sasabihin headers kasi di yun ang tawag sa atin and walang aftermarket talaga na headers para sa GE... sabihin mo cat delete or down pipe or kung alam nila yung sa Speedlab, name drop mo na yung Hot Pipes hehe just a heads up, they quoted me for a midpipe at 20k to 23k... so kung mahal down pipe sa iba, alam na na mahal nga aabutin ang custom cat delete/downpipe sa Autoplus

jave, yun nga lang talaga selling point ng Hot Pipes, its tested... di ren nila recommended mag midpipe, though it may not be about the Hot Pipes, its more of the car... its not making enough power talaga

[jave]

Of course, the GE is a slow car. The only way you want a GE to make power without nitrous is either through engine swap or turbo/supercharger.

At best, you can get like....1-2 hp from the mods? lol.

[krm]

boss Mike, balitaan moko though si Troy, nagtanong na, wag mong sasabihin headers kasi di yun ang tawag sa atin and walang aftermarket talaga na headers para sa GE... sabihin mo cat delete or down pipe or kung alam nila yung sa Speedlab, name drop mo na yung Hot Pipes hehe just a heads up, they quoted me for a midpipe at 20k to 23k... so kung mahal down pipe sa iba, alam na na mahal nga aabutin ang custom cat delete/downpipe sa Autoplus

jave, yun nga lang talaga selling point ng Hot Pipes, its tested... di ren nila recommended mag midpipe, though it may not be about the Hot Pipes, its more of the car... its not making enough power talaga

Halos same rin sa quote nyo sir, for me the gains doesn't justify the cost. Stick nalang ako sa KNN Typhoon kit and headers. Medjo weary lang ako sa sinabi mo na natanggal weld ng sensor sa headers. Mahirap ata yun, kung si misis gumamit ng kotse at mangyari yun yari ako lol.

[bayen]

anyone possibly selling their Spoon CF Chin? Just the Chin.
got into unfortunate accident and mine got smashed. on a tight budget so 2nd hand would be more preferred.

[buknoi29]

anyone possibly selling their Spoon CF Chin? Just the Chin.
got into unfortunate accident and mine got smashed. on a tight budget so 2nd hand would be more preferred.

ouch! sorry about that. i feel your pain. ako din nung magasgasan lang ilalim ng front bumper ko sobrang nastress ako. be extra careful next time sir

[Troy Inovero]

yan din plan ko troy. update moko pag nakapagpagawa ka na ha. masyado pang "tame" yung buga ng hks ko e hehe.. magkano kaya pagawa ng headers dun? nagpaquote kana? btw nice to have you as my new fb friend hehe nakita ko jazz mo ouch! muntik na pala madale ng baha. i mean nadale na buti up and running parin.

Plano mo din mag inquire sa freemuff sir? Nako medyo matatagalan pa ko magpalit ng downpipe, kasi uunahin ko muna yung hks muffler e. :D
Nice to have you as my friend too sir.
Yes nadali sha ng baha nung habagat, hanggang ngayon nasa casa padin sya, 1 month na sya sa saturday andun, huhu. Miss ko na nga yun e.

[Troy Inovero]

oo nga sir troy mukang di naman doubtful yung prev owner. ok din kasi yung nakakatsamba ka ng orig na goodies for our ge's na bang for the buck hehe. kung makakatipid ng half the orig price tapos very good condition eh di why not di ba. hehe nakita ko typhoon intake mo badtrip gusto ko na tuloy kunin yung sa amazon 10k pesos lang kasi. di pa dumarating yung drop in ko bibili nako ng typhoon haha. benta ko nalang siguro yung drop in ko ng worth ng bili ko. 2k kasama na recharging kit hehehe

Actually balak ko din bilhin yung nabili mong muffler sir, kase sure na orig sya e, tapos excellent condition pa sha tapos mura pa.
Hindi typhoon yung intake ko sir, simota lang yun, napeke ka ng kulay hahaha! :D
Go sir buy na ng typhoon intake, sulit na sulit daw yun e.

[Troy Inovero]

Had the Shadow throttle controller installed in my dad's Innova. It did remedy the Innova's delayed throttle response for a fraction of the Pivot's price. So if you want a cheaper alternative, this one works.

Is there a big delay with the throttle response of the GE?

Sir nawala po talaga yung delay ng throttle response?
Medyo maliit lang naman yung delay sa GE.

[Troy Inovero]

Personally, I have not had a transaction with Fremuff other than my having them replace my muffler to something else i had also brought. And this was back in 2001. What I've heard though, from folks on the Ford board is that Fremuff does a good job with their exhaust systems. I've since wanted to try them, but they're just too out of the way/sked conflict with me.

Anyhow, for your reference, baka makatulong, I had inquired with them a stainless steel set for a friend's GE:
Headers - 9k
Muffler - 4k
Midpipe - depends on how long you want it to be

Their location is along Abad Santos in San Juan.

Sir hulog ka ng langit! Very helpful yang pagbanggit mo ng prices.
Ang laki ng price difference. 9k and 14.5k(hotpipes).
Tapos yung hotpipes pa na nabili ni sir pcuerpo nagkaroon agad ng problem, dun pa sa part na may weld. Kaya medyo doubtful yung quality nya.

[Troy Inovero]

mga sir saan nakakabili ng RS headlight? ang ganda kasi tingnan if paired with carbon fiber hood. pwede bang pa paint nalang yung oem headlights para mag mukhang rs look

May RS headlight din pala? Kala ko RS taillight lang. :D

[Troy Inovero]

*IMm29:

More or less, within the same numbers as I found from the web. For headers, the cheapest ones are cast iron (I imagine these are the 3-4k range mentioned a few posts back) and aluminized ones for around 5k. (Not necessarily from fremuf.)

Kaso sir hindi po ata maganda ang cast iron e? Stainless Steel talaga maganda. Yun din ang sabe ng speedlab e.

[Troy Inovero]

boss Mike, balitaan moko though si Troy, nagtanong na, wag mong sasabihin headers kasi di yun ang tawag sa atin and walang aftermarket talaga na headers para sa GE... sabihin mo cat delete or down pipe or kung alam nila yung sa Speedlab, name drop mo na yung Hot Pipes hehe just a heads up, they quoted me for a midpipe at 20k to 23k... so kung mahal down pipe sa iba, alam na na mahal nga aabutin ang custom cat delete/downpipe sa Autoplus

jave, yun nga lang talaga selling point ng Hot Pipes, its tested... di ren nila recommended mag midpipe, though it may not be about the Hot Pipes, its more of the car... its not making enough power talaga

Oo nga e medyo mali yung tanong ko sa autoplus nung nag inquire ako, haha.
20k to 30k ang midpipe sa autoplus sir? I think i can help you with with that midpipe/centerpipe thing.
May nakita kasi akong ads sa sulit, brand new hks hi power muffler 13k lang. Tapos may video dun sa ad nya, sya mismo nag upload e. Hindi na ko mag ppost dito ng link kasi hindi naman pwede e.
Dun kasi sa video na yun, ang mod ng GE is hks hi power muffler and hks centerpipe. Ngayon tinext ko yung seller, wala pa daw stock nung muffler, tas tinanong ko kung magkano yung centerpipe, 22k daw tapos by order lang sya.
If you want sir i ppm ko sayo yung link nung ad and youtube video pati nadin yung number nung seller.
Kung sakali lang naman na mas gusto mo yung hks centerpipe over that 20k to 30k.

[Troy Inovero]

anyone possibly selling their Spoon CF Chin? Just the Chin.
got into unfortunate accident and mine got smashed. on a tight budget so 2nd hand would be more preferred.

Aww sakit nyan sir. Pero sana maayos din agad.

[jave]

*Troy:

Yes, for one very big reason: they're not rust-proof.

*bayen:

That sounds bad. Too bad can't help. The only thing I've got a spare of is a Spoon Gen1/Duckbill CF spoiler for the GE. I really should starting finding a buyer for it...

[bayen]

ouch! sorry about that. i feel your pain. ako din nung magasgasan lang ilalim ng front bumper ko sobrang nastress ako. be extra careful next time sir

i wish it was just a scratch or a dent. huhuhu

[IMm29]

*IMm29:

More or less, within the same numbers as I found from the web. For headers, the cheapest ones are cast iron (I imagine these are the 3-4k range mentioned a few posts back) and aluminized ones for around 5k. (Not necessarily from fremuf.)

Bro,
Cast or block iron? Or same banana lang ba yun?

[IMm29]

Halos same rin sa quote nyo sir, for me the gains doesn't justify the cost. Stick nalang ako sa KNN Typhoon kit and headers. Medjo weary lang ako sa sinabi mo na natanggal weld ng sensor sa headers. Mahirap ata yun, kung si misis gumamit ng kotse at mangyari yun yari ako lol.

Medyo mahal nga c Hotpipes. At siguro nga may konting pagkukulang sa design/install kaya nakalas. But another factor is dyno tuning which provided some uncommon major stress.

I agree na di dapat kumalas yun, but with that much stress not being usual, baka naman di kakalas yun ng basta-basta.

Had a similar problem with my suv. Replaced the entire exhaust with a bigger one. Been using it mainly for city drives for almost a year when i took it on sctex. Pedal to the metal from pampanga to tarlac. Ayun, kumalas pagmenor sa tollbooth. Hehe! Putol from the downpipe. Na stress test, tanggal ang mga bracket.

[IMm29]

Sir nawala po talaga yung delay ng throttle response?
Medyo maliit lang naman yung delay sa GE.

Yes sir. Sa Innova kasi may lag talaga at low speeds. Masisingitan ka ng ayaw mong pasingitin. On steep inclines, the second in delay will make it a bit hard to time the climb. Magagahol ka kung baga. With the throttle controller, you can eliminate this delay. Or add to it, if you wanna stymie an aggressive greenhorn driver. Hehe!

No there is no power made, but like in the case of the gas Innova, may power na naman, matagal lang sumipa.