Stainless and Black Iron Pipings besides getting from an exhaust shop

**miko101130** · March 1st, 2013 08:57 PM

Originally Posted by monty_GTV

anyone knows where the new shop of Fremuff is located? their shop in San Juan is no longer there.

how about ALPAN Muffler House (Araneta ave.) and Mufflerland (T. Morato)? Any feedback guys?

I plan to have my exhaust system replaced next week from 2" to 2.5" stainless pipe, from downpipe to tail-end. I already have a magnaflow muffler and 2 exhaust tips. TIA

from what i've heard ok yang sa meh araneta... medyo pricey lang since the last time i inquired there...

Sir monty_GTV, how much kuha mo magnaflow? at saan? hehehe

**monty_GTV** · March 1st, 2013 09:47 PM

Originally Posted by miko101130

from what i've heard ok yang sa meh araneta... medyo pricey lang since the last time i inquired there...

Sir monty_GTV, how much kuha mo magnaflow? at saan? hehehe

sir miko, pabili from US, nasa $114 din.

i check ko din ang Brodeth at Speedlab, mas pricey siguro magpa-intall sa kanila pero pulido naman...

**gearspeed** · March 1st, 2013 10:32 PM

Originally Posted by monty_GTV

anyone knows where the new shop of Fremuff is located? their shop in San Juan is no longer there.

how about ALPAN Muffler House (Araneta ave.) and Mufflerland (T. Morato)? Any feedback guys?

Hala baka wala na ang fremuff.
Same question magaling ba magweld ang Alpan?Ano meron ang alpan na type of weld?
Ok lang ba kung sa exhaust shop ko na lang pabend yung stainless? Baka kasi magkamali ako ng bili ng bended na stainless eh.

Thanks.

**number001** · March 1st, 2013 11:09 PM

^ I think if you have a sample or even better an actual exhaust pipe (with all the bends and all), the machine shop can easily copy the bend(s).

**gearspeed** · March 2nd, 2013 12:52 PM

Gawin ko na lang bibili na lang ako ng stainless piping then bahala na ang exhaust shop ibend yun.

**bmacavanza** · March 12th, 2013 05:30 PM

Galvanic corrosion ang nangyari

Originally Posted by gearspeed

The rust I had on the muffler was on the tail pipe and bracket. I still manage to save the muffler by polishing it again and again but the bracket never went back to stainless it went to ordinary metal color.
Do they have an elbow stainless or do I need to have it done by the exhaust shop and purchase in alonzo a straight pipe stainless?
One exhaust shop uses 304. I'm thinking of getting the 304 will go their next week..

**Tj_abs** · March 13th, 2013 12:08 PM

Mga bossing question po, na try nyo na mag palagay ng "cat back exhaust"? Pwede kaya sa diesel engine? Ganda kasi ng tunog sa v6 engine, pino at swabe ang sound.TIA

**miko101130** · March 13th, 2013 09:22 PM

sa diesel tunog jeep...

sa gas na V6 maganda talaga sound... iba kasi ang volume ng exhaust sa v6...
pag ginawa sa diesel you will hear the compression explosion... which is not very pleasant...