Remote bypass oil filtration

**Leo_Arz** · January 18th, 2016 02:28 PM

Originally Posted by jmpet626

+1 sa Mri Liempo! Sobrang traffic nga lang sa Araneta ave.

Pag nabili dun Ng Zic at Baldwin napapabili din ako Ng liempo at rice ambango nakagutom. Palipas trapik.

**Mask Rider Blac** · January 18th, 2016 04:10 PM

Originally Posted by jaggerx3

May number ka niya bro? Pabulong naman

09176004703 ☺

**jaggerx3** · April 25th, 2016 05:20 PM

I don't know why my BD7028 got sand like feels sa may gilid.

Sent from my LG-H818 using Tapatalk

**Ry_Tower** · April 25th, 2016 05:42 PM

Originally Posted by jaggerx3

I don't know why my BD7028 got sand like feels sa may gilid.

Sent from my LG-H818 using Tapatalk

As long as hindi sa inner part nang rubber seal okay lang imho. Baka dsut lang yan from the environment. Mahirap yung sa loob mismo seal, sa used oil, ibig sabihin hindi maganda filtration.

**baludoy** · April 25th, 2016 06:30 PM

ang donaldson heavy duty for the monty ok din ba? i've been using baldwin bd28s for the longest time and this was offered to me as an alternative

**jaggerx3** · April 25th, 2016 06:44 PM

Originally Posted by Ry_Tower

As long as hindi sa inner part nang rubber seal okay lang imho. Baka dsut lang yan from the environment. Mahirap yung sa loob mismo seal, sa used oil, ibig sabihin hindi maganda filtration.

Pagka tanggal ng filter may dust na sa paligid. I don't know pero ung tumulo naman nung binaliktad ko filter wala naman dust. Pero yung sa dipstick bago ako mag change oil may kaunting grains pero very minimal naman.

Sent from my LG-H818 using Tapatalk

**miked** · April 25th, 2016 08:14 PM

Originally Posted by jaggerx3

Pagka tanggal ng filter may dust na sa paligid. I don't know pero ung tumulo naman nung binaliktad ko filter wala naman dust. Pero yung sa dipstick bago ako mag change oil may kaunting grains pero very minimal naman.

Sent from my LG-H818 using Tapatalk

icheck mo muna oil pressure using a mechanical gage.

on your next oil replacement siguro sir e maglagay ka ng filter (paper, fine cloth, coffee filter, etc.) sa drain pan para makita kung mayron pa rin mga particles sa oil

**kagalingan** · April 27th, 2016 04:27 PM

Originally Posted by baludoy

ang donaldson heavy duty for the monty ok din ba? i've been using baldwin bd28s for the longest time and this was offered to me as an alternative

The big three are fleetguard, donaldson and baldwin.

Yung BD28 sumikat yan kaso lately manipis yung casing. Pag kinabit ng mechanico at ginamitan ng kadena or metal to tighten eh mayuyupi yan at eventually mabubutas sa katagalan. Sa mitsubishi adventure club forum meron mga nabutasan ng bd28 dahil yung mechanic gumamit ng kadena para tighten. Buti nabutasan sya mga around 5,000 to 7,000kms at napansin nya agad sa parking area. So better use old rubber timing belt or interior ng gulong ng bike to tighten. Kung kaya hand tighten mas ok.

Ang donaldson maganda dahil makapal pagkagawa ng casing at maganda micron ratings. Underrated lang.

Fleetguard ang pinakamaganda sa lahat lalo na yung made in europe forgot what country. Kaso doble presyo ang mahal at hindi available sa pinas. Wag bibili ng fleetguard pag nakasulat product of USA. Ibig sabihin nun subcontract.