sasakyan ay 99 isuzu crew cab pickup (fuego)

concentrate na lang muna ako sa front windows (driver's & passenger side).

25 A fuse is ok.
Power window relay is bad pero napalitan ko na.

wiring is good on the switch harness side. battery voltage is applied, good ground, continuous circuit on the power window wiring.

driver's side motor reads 120 ohms. applied batt voltage directly to it, no response. so motor is bad.
passenger side motor reads almost zero ohms. with batt voltage applied, window moves on up and down. so passenger side motor is good.

problema ay ayaw gumalaw (as in walang response ti konti man lang) na kung yung mga switches sa may master/driver's side at passenger side (ganun din sa likod) ang ginamit. checked the ground, ok naman.

sinubukan ko tignan ang laman loob ng switch, aba e kumplikado din pala. may IC, capacitor, resistor, atbp.

any help please! DIY ako ngayon. ayoko magpunta muna sa mga "Banawe power windows" dito sa probinsya dahil malamang papalitan nila ang buong wiring neto which is tingin ko mahusay pa.