Detailing Thread [For Newbies][continued 2]

**scharnhorst** · December 4th, 2010 10:12 AM

7:30 ba sa mcdo katips?

nako lagot tayong mga dumadaan ng commonwealth!

**jozep** · December 4th, 2010 02:21 PM

Originally Posted by scharnhorst

7:30 ba sa mcdo katips?

nako lagot tayong mga dumadaan ng commonwealth!

Naku di lang pala sa commonwealth ang closed:

On December 5 2010, race day of the 2nd Quezon City International Marathon, traffic will be closed from 12 a.m. to 12 noon at:

around the Quezon Memorial Circle
portion of Commonwealth Avenue headed towards Fairview
C.P Garcia Avenue
University Avenue
East Avenue
Visayas Avenue
Kalayaan Avenue
North Avenue
Quezon Avenue
University Avenue in UP Diliman

**PSI** · December 4th, 2010 04:10 PM

Originally Posted by jozep

Naku di lang pala sa commonwealth ang closed:

On December 5 2010, race day of the 2nd Quezon City International Marathon, traffic will be closed from 12 a.m. to 12 noon at:

around the Quezon Memorial Circle
portion of Commonwealth Avenue headed towards Fairview
C.P Garcia Avenue
University Avenue
East Avenue
Visayas Avenue
Kalayaan Avenue
North Avenue
Quezon Avenue
University Avenue in UP Diliman

mga idol,
try ninyo dumaan na lang ng cubao.....U-TURN kayo sa pag katapos ng flyover papunta MARIKINA...... para papunta na kayo ng ateneo

**Reepicheep** · December 4th, 2010 07:43 PM

OT: Paralyzed pala kaming mga tiga-Tandang Sora. Sarado Visayas, Commonwealth and Circle.

**scharnhorst** · December 4th, 2010 08:11 PM

hanap nalang ng paraan!

natuyuan ng ulan yung mazda2 namin... wah. daming water marks. di natanggal sa washing lahat

sana kaya pa ng clay

**kafph2000** · December 4th, 2010 10:22 PM

hi guys!
Finally got a claying kit!

I have questions though.
To what smallest portion can I divide a single clay bar?
Will half of it suffice to clay the whole car?
And for how many times can I use a clay bar before i throw it away?
Btw, it will be the first time I will clay our cars, so I guess there's a thick layer of dirt on them. Thanks!

**georgeD** · December 4th, 2010 11:21 PM

Originally Posted by kafph2000

hi guys!
Finally got a claying kit!

I have questions though.
To what smallest portion can I divide a single clay bar?
Will half of it suffice to clay the whole car?
And for how many times can I use a clay bar before i throw it away?
Btw, it will be the first time I will clay our cars, so I guess there's a thick layer of dirt on them. Thanks!

i use mothers clay bar and here's what i do: i usually cut one bar in halves and use 1/2 and save the other half for later use... i then make ball out of it and press it thin like a burger patty and spray about 2' x 2' panel with the QD spray (showtime) and slide the clay left-right, up-down without any pressure, i just let it slide until it smoothly sliding, then fold it and make a ball again and thin patty-like... when i see the clay becomes rough or it does not smoothly slide, then that's the time you discard it... also when you drop the clay, don't use it anymore as this might scratch the surface of the car... 1 bar of new clay is more than enough for 3 ave size car (sedan), but on my SUV, i always use a new half every 6 months and discard it after... HTH

**kerikzb** · December 5th, 2010 06:45 PM

WHAT: BASIC DETAILING FOR BEGINNERS
WHERE: SOMEWHERE SA KATIPUNAN
WHEN: DEC 5, 2010 (SUN)
TIME: 8am
TOPICS:
1) HOW TO PROPERLY WASH YOUR CAR
2) STEP 1-2-3 ON 1 PANEL ONLY (WITH POLISHER/BY HAND)
3)WHEEL detailing
4) product knowledge

PARTICIPANTS
1) PSI
2) Hardinero
3) Chikselog - tentative
4) kErikzb ==(pls IM me your mobile no)
5) scharnhorst
6) bombitmd
7) jed
8) yvesjae
9) jozep - tentative

Thanks Sir Edwin for the detailing demo/tips/tutorial etc..

*scharnhorst TL ako sa mazda mo..

*PSI *jed nice to meet ya'll.. sori late. hehe.

Next time ulit. :D dami ko natutunan. :D

**jozep** · December 5th, 2010 06:54 PM

Originally Posted by kerikzb

WHAT: BASIC DETAILING FOR BEGINNERS
WHERE: SOMEWHERE SA KATIPUNAN
WHEN: DEC 5, 2010 (SUN)
TIME: 8am
TOPICS:
1) HOW TO PROPERLY WASH YOUR CAR
2) STEP 1-2-3 ON 1 PANEL ONLY (WITH POLISHER/BY HAND)
3)WHEEL detailing
4) product knowledge

PARTICIPANTS
1) PSI
2) Hardinero
3) Chikselog - tentative
4) kErikzb ==(pls IM me your mobile no)
5) scharnhorst
6) bombitmd
7) jed
8) yvesjae
9) jozep - tentative

Thanks Sir Edwin for the detailing demo/tips/tutorial etc..

*scharnhorst TL ako sa mazda mo..

*PSI *jed nice to meet ya'll.. sori late. hehe.

Next time ulit. :D dami ko natutunan. :D

sorry guys, di ako nakarating.

*psi - sir, thanks sa pag txt nun location. pasensya na ndi lang ako nakarating.

**scharnhorst** · December 5th, 2010 07:55 PM

Originally Posted by kerikzb

Thanks Sir Edwin for the detailing demo/tips/tutorial etc..

*scharnhorst TL ako sa mazda mo..

*PSI *jed nice to meet ya'll.. sori late. hehe.

Next time ulit. :D dami ko natutunan. :D

hehe. thanks dude! nice meeting you bro! kita kits nalang ulit

*PSI: ok ka na idol?

*jed: kita kits sa next detailing session bro!

most of all salamat kay master edwin!