Tsikot.ph PHUV Prototype

[ehnriko]

Para ganahan yung iba...

Here's a concept I made last night... I'll let everyone for sneak peak.

It's a City Utility Vehicle... a.k.a. C-Ute or CUTE!

It aims to bring a feeling of being inside a big bus for the 5 passengers... the rear section is just a box... with enough payload capacity to accomodate typical cargo items.

There is only one curved glass in this vehicle... the side glasses are flat.

[Flagg]

Ganda bosing! Parang S-Cargo na pinaghalo sa Renault Trafic (my favorite van):

[jpdm]

This is not to discourage potential PHUV designers. It's a challenge. And a worthy one at that. Mr. Domingo Guevara, the founder of DMG (which assembled the VW Beetle here), once had a vision for the Philippines. He believed that industrialization is the way to becoming a first world nation. This is what the humble PHUV is all about.

[/QUOTE]


Indeed, sir.

We can't be a first world country without a respectable industrial sector--especially an auto industry..Malaysia, kahit lugi na Proton, ayaw nilang i-give up. bakit tayo......

MVPMAP and Tsikot...you are the only hope of the PHUV and revival of the auto industry...

Now, the ratification of JPEPA will definitely annihilate whatever is left of our pathetic local auto industry (zero tariff to CBU of Japan.paano local manufacturers? wholesale na talaga pagbebenta sa PInas...)..I hope the senators will not ratify it because only Japan will benefit from it.

Pres. Gloria, Gising!!!!Hindi tayo magiging first world kung natirang business sa pinas buy and sell, importation, spa, mall, call center at gimikan...

[milo-ph]

milo! andami pala niyan.

He he he...nagkataon lang absent boss ko kaya nakagawa ako!

[spectral]

Reality check for those who wish to design a PHUV: the limited fabrication techniques available to the local manufacturers and budget contraints are factors that will affect the aesthetics of the first generation PHUV. The PHUV will have flat glass and flat panels. Curved panels can also be used as long as they are bent in one direction only. And then there is the matter of proportion. It won't have SUV proportions (big wheels in relation to the body), rather it will most likely have AUV proportions (small wheels in relation to body - example: the MVPMAP PHUV). The PHUV will have a ladder frame, making it tall. With these limitations in mind, now try to come up with a beautiful design or at least one that won't be the target of Tsikoteers' derision.

Yan ang sinasabi ko, you guys should GET REAL!

It's time to pick a final design and create a timeline on building the prototype (that's assuming that you guys really know how to build one). It has been six months since this thread started, you nasa drawing stage pa rin kayo.

[OyiL]

Yan ang sinasabi ko, you guys should GET REAL!

It's time to pick a final design and create a timeline on building the prototype (that's assuming that you guys really know how to build one). It has been six months since this thread started, you nasa drawing stage pa rin kayo.

E ikaw, anong ginagawa mo?

[safeorigin]

*spectral, can't you see that this is a forum? initially, 2-4 pa lang ang mga tsikoteer na naglakas loob na magdesign dito. nang i launch yung mvpmap phuv biglang nagmultiply ang mga designera and criticts. therefore, late na nagkaroon ng maraming designs, and as a forum, the public is the final judge. it can't be decided by one but of many clicks. and if you're not interested in helping at all, please critic the designs in a productive way para ma-improve ng kanilang respective designers.
and if you think about it, ask yourself of what you can do for your country that others have not. politicians just do the talking part but since their {you know what} are glued firmly to their seats, it is we, the public who does the dirty work for our country. don't expect that this project will be done in a few weeks because those are for professionals and we are but amateurs and humble enthusiasts.

just my PHP 0.92 though. peace

[drey]

Yan ang sinasabi ko, you guys should GET REAL!

It's time to pick a final design and create a timeline on building the prototype (that's assuming that you guys really know how to build one). It has been six months since this thread started, you nasa drawing stage pa rin kayo.

At the rate you are going, its going to take forever just to build a prototype.

Baka sa 1st anniversary sa March ganun parin ginagawa nyo- just blowing hot air at each other.

Spectral,

Have you ever read the whole thread? Baka naman hindi mo alam that there is one guy here who already has his own PhUV and he knows how to build one.

Did you know that Ford usually reach 2-3 years before making a prototype and test it? Actually, make it 4 years... Di lang ako sure.

[safeorigin]

pareng drey, make it 2 guys.

a 17 and an 18 year old kids.

and 14+ and counting amateur designers.

[spectral]

Have you ever read the whole thread? Baka naman hindi mo alam that there is one guy here who already has his own PhUV and he knows how to build one.

Did you know that Ford usually reach 2-3 years before making a prototype and test it? Actually, make it 4 years... Di lang ako sure.

Right, you got proof that he has built his PHUV?

With CAD and CNC these days, it take a Ford less than 1 year to make a prototype. Every year at the Detroit Motor Show-NAIAS, Ford has a new and different concept car.

[OyiL]

Right, you got proof that he has built his PHUV?

With CAD and CNC these days, it take a Ford less than 1 year to make a prototype. Every year at the Detroit Motor Show-NAIAS, Ford has a new and different concept car.

a which model? how can you be sure when the development of the model they unveil each year started? do you work for a big boy?

let me make you happy. ...we are using CAD

[drey]

Right, you got proof that he has built his PHUV?

That's nice... Its obvious that you dont read the whole thread. Meron po dito na may alam, afaik, and he did build his car. Dont bother me giving you the link, just search for it here.

[dprox]

sorry di ako marunong pa mag-3D, advertising kasi background ko, mahilig lang talaga ako sa kotse at nagkataon lang wala ako masyado ginagawa ngayon dito sa office namin. Pero try ko kausapin mga kabarkada ko na marunong mag-3D baka pwede nila i-render. thanks for looking!

milo, this group has an ongoing 3DSMax course for Tsikoteers being given FREE OF CHARGE. PM mo si drey, who's the 'official' registrar if you want to join.

* Everybody --
Suggestion lang: Please don't entertain potshots from trolls. Sayang oras. Those enthusiasts who are regular here know what path we are following. It's a learning trek from being wannabes to knowing what it takes to design and build your own Original Pilipino Vehicle.

[spectral]

That's nice... Its obvious that you dont read the whole thread. Meron po dito na may alam, afaik, and he did build his car. Dont bother me giving you the link, just search for it here.

Well, he could just be making false claims, you don't even know his real name. Don't just believe everything you read on the internet.

Right now, your capability of building the PHuV prototype is hinging on an unverified claim of one tsikot member. That is not how a serious project is conducted.

That is a loose variable. In the real world, that is how failures come about.

[drey]

Well, he could just be making false claims, you don't even know his real name. Don't just believe everything you read on the internet.

Right now, your capability of building the PHuV prototype is hinging on an unverified claim of one tsikot member. That is not how a serious project is conducted.

That is a loose variable. In the real world, that is how failures come about.

Well, you would also want to see AMC Hammer by Jappy? Its being exported to Australia!


*Jappy

Hello sir Jappy!

[dprox]

*drey,
You are inviting a useless debate between veteran tsikoteers and a newbie. Please do not feed trolls. Childish contentions like this do not deserve space in this forum.
Focus on the topic of this thread.

[cuecraftsman]

OT: was at the recent welding/machinery trade show over the weekend and finally saw the PhUV (red) i think this was same vehicle at market-market?

also onetime at e.rodriguez ave (infront of delos santos) have seen a chokaran-like vehicle (galvanize) was that you sir dprox?
have to backread/catch for now...

[Flagg]

*drey,
You are inviting a useless debate between veteran tsikoteers and a newbie. Please do not feed trolls. Childish contentions like this do not deserve space in this forum.
Focus on the topic of this thread.

Tama kayo sir dprox!

[spectral]

My assessment of the situation is that you guys do not have the capabilities nor resources to build a vehicle prototype.

A Phuv prototype will cost from 700,000 to 800,000 pesos. How do you people plan to finance this?

Please do not be shocked at my questions because these are real world considerations that you are facing in building your vehicle.

Drawing concept cars is easy, it takes only a few hours of free time. Bringing it to the next step of designing and blue-printing individual parts is something that needs professional attention. Then the "taxi meter" will start running.

I am asking you "veteran tsikoteers" to start looking at this project from a professional point of view. If not, you guys will still be in square one a year from now.

[jedi]

Mr Spectral, Im Jedi Dancel, Admin and co-owner of tsikot online commuhnity, the active people participating on this tsikot phuv prototype project knows each other, (by name, age, status, business and by face) please dont just react on something na di ka sigurado...

marami na napagdaanang batikos ang project na ito, wag na sanang dagdagan.. we created a dedicated forum for this project para mas maging productive and members of the group to share their ideas...

so what kung nasa drawing board pa lang ito, so what kung wala pang pangfinance... pero ito lang masasabi ko... with the help of this online community... nagkatagpo tagpo ang mga taong ito with the same interest.

use the search function... makikita mo proof ng isang tsikoteer dito na gumawa ng sarili nyang sasakyan.

now tell me may experience ka na ba gumawa ng ganitong project? paano mo nasabing magiging failure ito? and mind you... even this project become failure... future generations can easily make this forum as their reference.

every aspect of this project is being considered..

lastly, we have a rule against flame baiting and trolling... It will be up to us mods and admins to decide kung paano imomoderate ito.

again.. this is a dedicated and sponsored forum of tsikot, di ito kagaya ng ibang forums dito sa tsikot... expect us to be bias sa project na ito... and no matter what... 100% suportado ng tsikot and project na ito.

every

Well, he could just be making false claims, you don't even know his real name. Don't just believe everything you read on the internet.
Right now, your capability of building the PHuV prototype is hinging on an unverified claim of one tsikot member. That is not how a serious project is conducted.

That is a loose variable. In the real world, that is how failures come about.