squeaking clutch

**[archie]** · October 20th, 2008 02:02 AM

mga sir patulong naman,

kakapalit ko lang ng routine na clutch disc, pressure plate, and release bearing, may squeaking noise kasi when you press on the clutch. pero bumalik na naman after a few months... ano kaya ito?

edit: civic lxi 2000 po... everything is stock with the tranny... fcc yung brand na pinangpalit.

**technismo** · October 20th, 2008 05:49 AM

sir baka po hindi nalagyan ng greas ung sa clutch fork nya.. standard po yan sa toyota ung nag ojt po ako... san banda po ba naririnig? kung sa loob po or sa may makina? tnx

**[archie]** · October 20th, 2008 11:20 AM

^^ sir thanks for the quick reply... sa may makina po nanggagaling. anong grease maganda lagay?

**alwayz_yummy** · October 20th, 2008 05:40 PM

cable ba ang ek mo?
baka dun lang yun...

**1D4LV** · October 20th, 2008 05:44 PM

Originally Posted by alwayz_yummy

cable ba ang ek mo?
baka dun lang yun...

2000 Civic Lxi imho is hydraulic clutch.

**[archie]** · October 20th, 2008 05:45 PM

^^ ay hydraulic pala hehehe sorry sorry
cable pala yung lumang civic. :bwahaha:

**XTO** · October 20th, 2008 06:24 PM

normally sa release bearing and the plate galing ang ingay kung during apak. sana bago nga and di defective ang naipalit na release bearing. ang pressure plate kasi madaling makita kung napalitan ng bago dahil malalim na yung tama from the bearing.

**Dead Guy Sligh** · May 9th, 2009 03:01 PM

Pa ride na din sa thread.What if yung ingay is coming from inside the car? I mean if you press the clutch you will hear the squeeking sound.The clutch assembly was replaced a month ago. By the way the clutch is hydraulic.TIA

**technismo** · May 9th, 2009 07:37 PM

Originally Posted by Dead Guy Sligh

Pa ride na din sa thread.What if yung ingay is coming from inside the car? I mean if you press the clutch you will hear the squeeking sound.The clutch assembly was replaced a month ago. By the way the clutch is hydraulic.TIA

sir baka sa clutch pedal spring yan or dun sa clutch fork sir.. tnx

**anthon05** · May 11th, 2009 02:08 PM

hello makihalo din ako sa thread...

on my XTO just more than a month ago lang, replaced yung clutch master assembly ko. pagtapak ko clutch... yun may eeeek sya..parang nakakakilabot ng kaunti. ano kaya ito? sa assembly ba dahil bago? or kailangan lang wd40 sa may pedal?

thanks