clutch sliding!!!

[bogart_seph]

how do you know if its happening?

[1D4LV]

how do you know if its happening?

sabi nung mga nabasa ko sa mmph, but i have not tried it so i really don't know if this works..

put your car in 4th gear and release the clutch. pag namatay daw ang oto, sliding clutch na daw.

[Horsepower]

HG: hindi po kaya baliktad, it shouldn't die kasi sliding nga po e.


*bogart: initially, you will feel na parang ang hina ng arangkada but the engine is roaring. Minsang biglaan ang high-rev (kasi dumudulas) but you're not really moving fast.

[1D4LV]

HG: hindi po kaya baliktad, it shouldn't die kasi sliding nga po e.


*bogart: initially, you will feel na parang ang hina ng arangkada but the engine is roaring. Minsang biglaan ang high-rev (kasi dumudulas) but you're not really moving fast.

OT: sori, baliktad nga.....

[grantt]

parang naka neutral car mo while stepping the gas pedal.

[speedyfix]

your rpm goes up with the speed following suit.

[tsienra]

I have my own question po. I'm being sold a Toyota Hilux 2002. However, the seller says that the clutch is slipping. He had it checked already suposedly and it needs a replacement transmission valve body. Are what he told me credible, and how much should I prepare kaya for repairs? I asked Toyota about it already. I cannot bring the unit to them given that the transmission has been taken down. That given, they said that it could range from a 10k part replacement to something like a 90k overhaul. Paano kaya?

[speedyfix]

don't buy it na imo.

[venjo_garcia]

pag nag sliding na, malakas na sa gas yan. mataas ung rpm po and mabagal ung takbo. ung sa first gear pag hindi po pumapasok. paki check na lng po ung sa pressure plate finger. ibig sabihin po, hindi pa na fully release ung clutch disc.. umiikot pa sya. tnx

[pepengtom]

yung 1st gear ko, nag ddrag na... pero 2nd to 5th no problem at all..
slide na ba to?

[speedyfix]

check din the engine supports. kung busted sila it may cause a feeling similar to a sliding clutch in 1st gear

[xyrold]

buhayin ko lang tong thread na to,

kapapalit lang ng clutch lining ko, (pressure plate, clutch disk) yung release bearing ok pa kasi hindi naman maingay.

well based on my own experience about clutch sliding/dragging

1. dragging yung andar sa 1st gear hindi smooth (it could also be the engine support)

2. hirap pumasok ng 1st gear (i.e. umaandar ka ng mabagal, galing 2nd gear then dapat mag full stop ka muna, and bomba sa clutch para pumasok ung 1st gear.

3. pag arangkada from 2nd gear namamatay ang engine. (slight lang tapak sa gas)

4. medyo pansin ko talaga na humina ang hatak, ( and yes lumakas sa gas )

then nung napalitan na yung clutch lining, ok na.

1. very smoorth ang arangkada at pasok ng mga kambyo.

2. kahit gumugulong ng mabagal pumapasok ang 1st gear.

3. kayang umarangkada ng 2nd or 3rd gear at hindi namamatay engine.

4. ramdam ang hatak ng kotse, as in iba yung sibat ng kotse ko ngayon, (same driving style)

my car is honda lx 94 ..... excedy brand yung parts, gastos ko 5k

[menggoy]

buhayin ko lang tong thread na to,

kapapalit lang ng clutch lining ko, (pressure plate, clutch disk) yung release bearing ok pa kasi hindi naman maingay.

well based on my own experience about clutch sliding/dragging

1. dragging yung andar sa 1st gear hindi smooth (it could also be the engine support)

2. hirap pumasok ng 1st gear (i.e. umaandar ka ng mabagal, galing 2nd gear then dapat mag full stop ka muna, and bomba sa clutch para pumasok ung 1st gear.

3. pag arangkada from 2nd gear namamatay ang engine. (slight lang tapak sa gas)

4. medyo pansin ko talaga na humina ang hatak, ( and yes lumakas sa gas )

then nung napalitan na yung clutch lining, ok na.

1. very smoorth ang arangkada at pasok ng mga kambyo.

2. kahit gumugulong ng mabagal pumapasok ang 1st gear.

3. kayang umarangkada ng 2nd or 3rd gear at hindi namamatay engine.

4. ramdam ang hatak ng kotse, as in iba yung sibat ng kotse ko ngayon, (same driving style)

my car is honda lx 94 ..... excedy brand yung parts, gastos ko 5k

sir, tanong ko lang po mga ginastos nyo sa clutch sa lx 94 nyo? (same car po tayo). parang walang hatak yung kotse ko kahit mataas ang rpm tpos may panginginig.

nag try ako yung naka idle makina, nakahandbreak, press clutch, sinet ko sa 5th gear, tpos unti unti kong nirelease ang clutch, namatay naman ang makina (di pa sliding) pero kung di pa sliding kotse ko, walang kahatak hatak, namamatayan ako pag umaakyat sa carpark ng 2nd floor.

ano ano po mga pinalitan nyo sa clutch nyo? pati na rin price range nya. oem po ba o replacement?

sana po masagot nyo po tanong ko. maraming maraming salamat po.