Results 1 to 10 of 17
-
July 7th, 2003 06:03 PM #1
in a whole clutch assembly, what specific part that needed to replace when you want a super "kapit" na pick-up (response).
thanx, more power.
-
July 7th, 2003 06:43 PM #2
Hmm... we have done something to my flywheel that really helps interms of power transfer. It's hard to explain how it was done. Utilizing the stock flywheel machined to match the exact dimensions of the clutch disc plate, balanced to minimize excessive vibrations. BUT not lightened, so that torque bend is not affected in the process.
-
July 8th, 2003 10:30 AM #3
uy, di ko alam yan ah.
thanx.
btw, ano ba usually ang bumibigay kung dumudulas na yung clutch?
-
July 8th, 2003 10:54 AM #4
Clutch disc is usually the culprit. Be warned, rivets from clutch disc can cause damage to your flywheel assembly. When you hear some noise underneath the tranny, clutch release bearing maybe worn out or misplaced.
-
Verified Tsikot Member
- Join Date
- Oct 2002
- Posts
- 144
July 8th, 2003 01:27 PM #5Ungas:
pag sira na ba release bearing ang tunog eh parang may bakal na kinakayas sa ilalim?
kung release bearing lang ang may problema? pede ba yun lang ang palitan?
-
July 8th, 2003 03:22 PM #6
Bandido::: Yes sir, para po ba syang naglalagatukang bakal kapag tinapakan nyo ng bahagya ang clutch pedal (1/3 of the full clutch play) mawawala ang ingay. Imo, sirain po talaga kahit na bagong kabit ang clutch release bearing lalo na sa diesel engine. Yung sa akin 1 week pa lang napapalitan, may lumabas na kakaibang ingay.
Mas maganda po sana kung sabay na pinapalitan ang 3 clutch major components. Namely clutch disc, clutch release bearing and pressure plate. Para po maiwasan ang madalas na pagbaba at pagayos ng sasakyan.
-
Verified Tsikot Member
- Join Date
- Mar 2003
- Posts
- 149
July 8th, 2003 09:42 PM #7Originally posted by Ungas
Hmm... we have done something to my flywheel that really helps interms of power transfer. It's hard to explain how it was done. Utilizing the stock flywheel machined to match the exact dimensions of the clutch disc plate, balanced to minimize excessive vibrations. BUT not lightened, so that torque bend is not affected in the process.
saan ninyo pinagawa? Paano bina-balance ang flywheel?
-
-
Verified Tsikot Member
- Join Date
- Oct 2002
- Posts
- 144
July 9th, 2003 05:58 PM #9Sir Ungas,
Ganun mismo ang tunog at sintomas... sabi kasi nung tumingin pede pa yung clutch disk at pressure plate.. ala po ba remedyo kung release bearing lang?
-
Verified Tsikot Member
- Join Date
- Oct 2002
- Posts
- 290