LTO New Plate Release

**myas110** · October 30th, 2018 04:14 AM

Mas ok if you already purchased a vehicle, once the vehicle is for release, the plates are already available (given that the vehicle is already registered in the LTO database) and installed on the vehicle already with the conduction sticker peeled off.

Sent from my ASUS_Z011D using Tapatalk

**SoleusBB** · October 30th, 2018 10:10 AM

I agree, eyesore nga. Kating kati nga ako tanggalin eh, pati yung maliit na oval DENR sticker on the lower left hand of the windshield.

Problem is, wala pang plate.

**L1quid** · October 30th, 2018 10:46 AM

Originally Posted by SoleusBB

I agree, eyesore nga. Kating kati nga ako tanggalin eh, pati yung maliit na oval DENR sticker on the lower left hand of the windshield.

Problem is, wala pang plate.

Yung DENR sticker nung akin tinanggal ko yun on the first night nung sasakyan. Lahat ng stickers pati yung mga asa side & rear windows na alarm, etc tinanggal ko. Ang naiwan lang yung Conduction Stickers.

Then lagay ng gate pass stickers na kelangan ko. Later on window film.

And yes, can't wait to get rid of those conduction stickers too. Kaso ang huling balita eh late 2019 pa darating plates ko, 4 years amputek! Haha!

Sent from my POCOPHONE F1 using Tapatalk

**remzam** · October 30th, 2018 11:11 AM

Originally Posted by L1quid

Yung DENR sticker nung akin tinanggal ko yun on the first night nung sasakyan. Lahat ng stickers pati yung mga asa side & rear windows na alarm, etc tinanggal ko. Ang naiwan lang yung Conduction Stickers.

Then lagay ng gate pass stickers na kelangan ko. Later on window film.

And yes, can't wait to get rid of those conduction stickers too. Kaso ang huling balita eh late 2019 pa darating plates ko, 4 years amputek! Haha!

Sent from my POCOPHONE F1 using Tapatalk

Hirap na tanggalin ang sticker after four years. I'm sure kaya.pero effort na yun. Lutong luto na sa araw. Dikit na dikit.

Sent from my ONEPLUS A3000 using Tapatalk

**SoleusBB** · October 30th, 2018 11:11 AM

Originally Posted by L1quid

Lahat ng stickers pati yung mga asa side & rear windows na alarm, etc tinanggal ko.

Ah, yung may bar code things sa side windows? I peeled them off at the dealership at turn over.
Yung sticker naman ng dealership underneath the 3rd brake light, inalis ko naman when I got home (free advertisement everytime I brake? Neknek nila)

Did the same for my pickup when it was new. Mas gusto ko simple lang.

**SoleusBB** · October 30th, 2018 11:27 AM

Originally Posted by remzam

Hirap na tanggalin ang sticker after four years. I'm sure kaya.pero effort na yun. Lutong luto na sa araw. Dikit na dikit.

Sent from my ONEPLUS A3000 using Tapatalk

Scrape off with a razor blade and clean residue with gas.

Pag mahirap, wag pilitin matanggal lahat agad, kudkud a bit today, then tom ulit. Ingat lang ma etch yung glass. It will look ugly while under process, but di naman aabutin ng 1 wk siguro bago matanggal lahat

**Shutterbug** · October 30th, 2018 11:49 AM

When LTO releases our plate, what is going to be the process of installation? Kanya kanya ba or we need to go to them for them to install it personally?

Sent from my SM-A600G using Tapatalk

**remzam** · October 30th, 2018 12:11 PM

Originally Posted by SoleusBB

Scrape off with a razor blade and clean residue with gas.

Pag mahirap, wag pilitin matanggal lahat agad, kudkud a bit today, then tom ulit. Ingat lang ma etch yung glass. It will look ugly while under process, but di naman aabutin ng 1 wk siguro bago matanggal lahat

Ganyan ginawa ko sa akin. Paunti unti. Masakit na kuko ko eh Haha. Nalinis naman eventually.

Sent from my ONEPLUS A3000 using Tapatalk

**monty_GTV** · October 30th, 2018 12:49 PM

Originally Posted by remzam

Ganyan ginawa ko sa akin. Paunti unti. Masakit na kuko ko eh Haha. Nalinis naman eventually.

Sent from my ONEPLUS A3000 using Tapatalk

madali lang matanggal yan kahit pa yung very old stickers o marka ng stickers.

basahin ng mainit na tubig yung small towel o bimpo then ipatong sa sticker. let it soak for a while para lumambot yung sticker. ulitin lang basain ng mainit yung towel hanggang lumambot at madali ng tuklapin yung sticker. bili ka rin ng glue remover spray sa diy o ace at gamitin after matuklap yung sticker para maalis lahat residue sa salamin.

Sent from my SM-G960F using Tapatalk

**L1quid** · October 30th, 2018 04:52 PM

Originally Posted by monty_GTV

madali lang matanggal yan kahit pa yung very old stickers o marka ng stickers.

basahin ng mainit na tubig yung small towel o bimpo then ipatong sa sticker. let it soak for a while para lumambot yung sticker. ulitin lang basain ng mainit yung towel hanggang lumambot at madali ng tuklapin yung sticker. bili ka rin ng glue remover spray sa diy o ace at gamitin after matuklap yung sticker para maalis lahat residue sa salamin.

Sent from my SM-G960F using Tapatalk

Eto rin ang alam ko'ng style. Applies to most adhesives actually. Basta heat, very effective pantanggal ng dikit.

Although ang balak ko gamitin this time around is a heatgun.

Sent from my POCOPHONE F1 using Tapatalk